From: Heikki Krogerus <heikki.krogerus@linux.intel.com>
To: Prashant Malani <pmalani@chromium.org>
Cc: linux-kernel@vger.kernel.org,
Azhar Shaikh <azhar.shaikh@intel.com>,
Casey Bowman <casey.g.bowman@intel.com>,
Benson Leung <bleung@chromium.org>,
Enric Balletbo i Serra <enric.balletbo@collabora.com>,
Guenter Roeck <groeck@chromium.org>,
Lee Jones <lee.jones@linaro.org>, Mark Brown <broonie@kernel.org>,
Tzung-Bi Shih <tzungbi@google.com>,
Yicheng Li <yichengli@chromium.org>
Subject: Re: [PATCH 2/2] platform/chrome: cros_ec_typec: Add TBT compat support
Date: Thu, 25 Jun 2020 10:45:17 +0300 [thread overview]
Message-ID: <20200625074517.GC1487@kuha.fi.intel.com> (raw)
In-Reply-To: <20200624080926.165107-2-pmalani@chromium.org>
On Wed, Jun 24, 2020 at 01:09:24AM -0700, Prashant Malani wrote:
> Add mux control support for Thunderbolt compatibility mode.
>
> Suggested-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
> Co-developed-by: Azhar Shaikh <azhar.shaikh@intel.com>
> Co-developed-by: Casey Bowman <casey.g.bowman@intel.com>
> Signed-off-by: Prashant Malani <pmalani@chromium.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
> ---
> drivers/platform/chrome/cros_ec_typec.c | 70 ++++++++++++++++++++++++-
> 1 file changed, 69 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/platform/chrome/cros_ec_typec.c b/drivers/platform/chrome/cros_ec_typec.c
> index 1df1386f32e4..0c041b79cbba 100644
> --- a/drivers/platform/chrome/cros_ec_typec.c
> +++ b/drivers/platform/chrome/cros_ec_typec.c
> @@ -17,6 +17,7 @@
> #include <linux/usb/typec_altmode.h>
> #include <linux/usb/typec_dp.h>
> #include <linux/usb/typec_mux.h>
> +#include <linux/usb/typec_tbt.h>
> #include <linux/usb/role.h>
>
> #define DRV_NAME "cros-ec-typec"
> @@ -24,6 +25,7 @@
> /* Supported alt modes. */
> enum {
> CROS_EC_ALTMODE_DP = 0,
> + CROS_EC_ALTMODE_TBT,
> CROS_EC_ALTMODE_MAX,
> };
>
> @@ -165,6 +167,14 @@ static void cros_typec_register_port_altmodes(struct cros_typec_data *typec,
> port->p_altmode[CROS_EC_ALTMODE_DP].svid = USB_TYPEC_DP_SID;
> port->p_altmode[CROS_EC_ALTMODE_DP].mode = USB_TYPEC_DP_MODE;
>
> + /*
> + * Register TBT compatibility alt mode. The EC will not enter the mode
> + * if it doesn't support it, so it's safe to register it unconditionally
> + * here for now.
> + */
> + port->p_altmode[CROS_EC_ALTMODE_TBT].svid = USB_TYPEC_TBT_SID;
> + port->p_altmode[CROS_EC_ALTMODE_TBT].mode = TYPEC_ANY_MODE;
> +
> port->state.alt = NULL;
> port->state.mode = TYPEC_STATE_USB;
> port->state.data = NULL;
> @@ -391,6 +401,62 @@ static int cros_typec_usb_safe_state(struct cros_typec_port *port)
> return typec_mux_set(port->mux, &port->state);
> }
>
> +/*
> + * Spoof the VDOs that were likely communicated by the partner for TBT alt
> + * mode.
> + */
> +static int cros_typec_enable_tbt(struct cros_typec_data *typec,
> + int port_num,
> + struct ec_response_usb_pd_control_v2 *pd_ctrl)
> +{
> + struct cros_typec_port *port = typec->ports[port_num];
> + struct typec_thunderbolt_data data;
> + int ret;
> +
> + if (typec->pd_ctrl_ver < 2) {
> + dev_err(typec->dev,
> + "PD_CTRL version too old: %d\n", typec->pd_ctrl_ver);
> + return -ENOTSUPP;
> + }
> +
> + /* Device Discover Mode VDO */
> + data.device_mode = TBT_MODE;
> +
> + if (pd_ctrl->control_flags & USB_PD_CTRL_TBT_LEGACY_ADAPTER)
> + data.device_mode = TBT_SET_ADAPTER(TBT_ADAPTER_TBT3);
> +
> + /* Cable Discover Mode VDO */
> + data.cable_mode = TBT_MODE;
> + data.cable_mode |= TBT_SET_CABLE_SPEED(pd_ctrl->cable_speed);
> +
> + if (pd_ctrl->control_flags & USB_PD_CTRL_OPTICAL_CABLE)
> + data.cable_mode |= TBT_CABLE_OPTICAL;
> +
> + if (pd_ctrl->control_flags & USB_PD_CTRL_ACTIVE_LINK_UNIDIR)
> + data.cable_mode |= TBT_CABLE_LINK_TRAINING;
> +
> + if (pd_ctrl->cable_gen)
> + data.cable_mode |= TBT_CABLE_ROUNDED;
> +
> + /* Enter Mode VDO */
> + data.enter_vdo = TBT_SET_CABLE_SPEED(pd_ctrl->cable_speed);
> +
> + if (pd_ctrl->control_flags & USB_PD_CTRL_ACTIVE_CABLE)
> + data.enter_vdo |= TBT_ENTER_MODE_ACTIVE_CABLE;
> +
> + if (!port->state.alt) {
> + port->state.alt = &port->p_altmode[CROS_EC_ALTMODE_TBT];
> + ret = cros_typec_usb_safe_state(port);
> + if (ret)
> + return ret;
> + }
> +
> + port->state.data = &data;
> + port->state.mode = TYPEC_TBT_MODE;
> +
> + return typec_mux_set(port->mux, &port->state);
> +}
> +
> /* Spoof the VDOs that were likely communicated by the partner. */
> static int cros_typec_enable_dp(struct cros_typec_data *typec,
> int port_num,
> @@ -448,7 +514,9 @@ static int cros_typec_configure_mux(struct cros_typec_data *typec, int port_num,
> if (ret)
> return ret;
>
> - if (mux_flags & USB_PD_MUX_DP_ENABLED) {
> + if (mux_flags & USB_PD_MUX_TBT_COMPAT_ENABLED) {
> + ret = cros_typec_enable_tbt(typec, port_num, pd_ctrl);
> + } else if (mux_flags & USB_PD_MUX_DP_ENABLED) {
> ret = cros_typec_enable_dp(typec, port_num, pd_ctrl);
> } else if (mux_flags & USB_PD_MUX_SAFE_MODE) {
> ret = cros_typec_usb_safe_state(port);
> --
> 2.27.0.111.gc72c7da667-goog
thanks,
--
heikki
next prev parent reply other threads:[~2020-06-25 7:45 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-06-24 8:09 [PATCH 1/2] platform/chrome: cros_ec_typec: Add TBT pd_ctrl fields Prashant Malani
2020-06-24 8:09 ` [PATCH 2/2] platform/chrome: cros_ec_typec: Add TBT compat support Prashant Malani
2020-06-24 9:15 ` Heikki Krogerus
2020-06-24 9:20 ` Heikki Krogerus
2020-06-24 17:42 ` Prashant Malani
2020-06-25 7:45 ` Heikki Krogerus [this message]
2020-06-26 9:10 ` [PATCH 1/2] platform/chrome: cros_ec_typec: Add TBT pd_ctrl fields Enric Balletbo i Serra
2020-06-26 19:04 ` Prashant Malani
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200625074517.GC1487@kuha.fi.intel.com \
--to=heikki.krogerus@linux.intel.com \
--cc=azhar.shaikh@intel.com \
--cc=bleung@chromium.org \
--cc=broonie@kernel.org \
--cc=casey.g.bowman@intel.com \
--cc=enric.balletbo@collabora.com \
--cc=groeck@chromium.org \
--cc=lee.jones@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=pmalani@chromium.org \
--cc=tzungbi@google.com \
--cc=yichengli@chromium.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox