From: Frederic Weisbecker <frederic@kernel.org>
To: Thomas Gleixner <tglx@linutronix.de>
Cc: LKML <linux-kernel@vger.kernel.org>,
Frederic Weisbecker <frederic@kernel.org>,
Anna-Maria Gleixner <anna-maria@linutronix.de>,
Peter Zijlstra <peterz@infradead.org>,
Juri Lelli <juri.lelli@redhat.com>
Subject: [RFC PATCH 05/10] timers: Always keep track of next expiry
Date: Wed, 1 Jul 2020 03:10:25 +0200 [thread overview]
Message-ID: <20200701011030.14324-6-frederic@kernel.org> (raw)
In-Reply-To: <20200701011030.14324-1-frederic@kernel.org>
So far next expiry was only tracked while the CPU was in nohz_idle mode
in order to cope with missing ticks that can't increment the base->clk
periodically anymore.
We are going to expand that logic beyond nohz in order to spare timers
softirqs so do it unconditionally.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Anna-Maria Gleixner <anna-maria@linutronix.de>
Cc: Juri Lelli <juri.lelli@redhat.com>
---
kernel/time/timer.c | 35 ++++++++++++++++++-----------------
1 file changed, 18 insertions(+), 17 deletions(-)
diff --git a/kernel/time/timer.c b/kernel/time/timer.c
index 4aa74aafdd33..30f491ec875a 100644
--- a/kernel/time/timer.c
+++ b/kernel/time/timer.c
@@ -550,8 +550,22 @@ trigger_dyntick_cpu(struct timer_base *base, struct timer_list *timer)
* timer is not deferrable. If the other CPU is on the way to idle
* then it can't set base->is_idle as we hold the base lock:
*/
- if (!base->is_idle)
- return;
+ if (base->is_idle)
+ wake_up_nohz_cpu(base->cpu);
+}
+
+/*
+ * Enqueue the timer into the hash bucket, mark it pending in
+ * the bitmap and store the index in the timer flags.
+ */
+static void enqueue_timer(struct timer_base *base, struct timer_list *timer,
+ unsigned int idx)
+{
+ hlist_add_head(&timer->entry, base->vectors + idx);
+ __set_bit(idx, base->pending_map);
+ timer_set_idx(timer, idx);
+
+ trace_timer_start(timer, timer->expires, timer->flags);
/* Check whether this is the new first expiring timer: */
if (time_after_eq(timer->expires, base->next_expiry))
@@ -570,21 +584,7 @@ trigger_dyntick_cpu(struct timer_base *base, struct timer_list *timer)
} else {
base->next_expiry = timer->expires;
}
- wake_up_nohz_cpu(base->cpu);
-}
-/*
- * Enqueue the timer into the hash bucket, mark it pending in
- * the bitmap and store the index in the timer flags.
- */
-static void enqueue_timer(struct timer_base *base, struct timer_list *timer,
- unsigned int idx)
-{
- hlist_add_head(&timer->entry, base->vectors + idx);
- __set_bit(idx, base->pending_map);
- timer_set_idx(timer, idx);
-
- trace_timer_start(timer, timer->expires, timer->flags);
trigger_dyntick_cpu(base, timer);
}
@@ -1482,7 +1482,6 @@ static int __collect_expired_timers(struct timer_base *base,
return levels;
}
-#ifdef CONFIG_NO_HZ_COMMON
/*
* Find the next pending bucket of a level. Search from level start (@offset)
* + @clk upwards and if nothing there, search from start of the level
@@ -1574,6 +1573,7 @@ static unsigned long __next_timer_interrupt(struct timer_base *base)
return next;
}
+#ifdef CONFIG_NO_HZ_COMMON
/*
* Check, if the next hrtimer event is before the next timer wheel
* event:
@@ -1779,6 +1779,7 @@ static inline void __run_timers(struct timer_base *base)
levels = collect_expired_timers(base, heads);
base->clk++;
+ base->next_expiry = __next_timer_interrupt(base);
while (levels--)
expire_timers(base, heads + levels);
--
2.26.2
next prev parent reply other threads:[~2020-07-01 1:10 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-07-01 1:10 [RFC PATCH 00/10] timer: Reduce timers softirq (and other optimizations) Frederic Weisbecker
2020-07-01 1:10 ` [RFC PATCH 01/10] timer: Prevent base->clk from moving backward Frederic Weisbecker
2020-07-01 16:35 ` Juri Lelli
2020-07-01 23:20 ` Frederic Weisbecker
2020-07-02 9:59 ` Juri Lelli
2020-07-02 14:04 ` Frederic Weisbecker
2020-07-02 14:32 ` Frederic Weisbecker
2020-07-02 15:57 ` Juri Lelli
2020-07-02 9:48 ` Thomas Gleixner
2020-07-01 1:10 ` [RFC PATCH 02/10] timer: Move trigger_dyntick_cpu() to enqueue_timer() Frederic Weisbecker
2020-07-01 1:10 ` [RFC PATCH 03/10] timer: Simplify LVL_START() and calc_index() Frederic Weisbecker
2020-07-02 11:59 ` Thomas Gleixner
2020-07-02 12:27 ` Frederic Weisbecker
2020-07-01 1:10 ` [RFC PATCH 04/10] timer: Optimize _next_timer_interrupt() level iteration Frederic Weisbecker
2020-07-01 1:10 ` Frederic Weisbecker [this message]
2020-07-01 1:10 ` [RFC PATCH 06/10] timer: Reuse next expiry cache after nohz exit Frederic Weisbecker
2020-07-01 1:10 ` [RFC PATCH 07/10] timer: Expand clk forward logic beyond nohz Frederic Weisbecker
2020-07-01 1:10 ` [RFC PATCH 08/10] timer: Spare timer softirq until next expiry Frederic Weisbecker
2020-07-01 1:10 ` [RFC PATCH 09/10] timer: Remove must_forward_clk Frederic Weisbecker
2020-07-01 1:10 ` [RFC PATCH 10/10] timer: Lower base clock forwarding threshold Frederic Weisbecker
2020-07-02 13:21 ` Thomas Gleixner
2020-07-02 13:32 ` Frederic Weisbecker
2020-07-02 15:14 ` Thomas Gleixner
2020-07-03 0:12 ` Frederic Weisbecker
2020-07-03 9:13 ` Thomas Gleixner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200701011030.14324-6-frederic@kernel.org \
--to=frederic@kernel.org \
--cc=anna-maria@linutronix.de \
--cc=juri.lelli@redhat.com \
--cc=linux-kernel@vger.kernel.org \
--cc=peterz@infradead.org \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox