From: Jonathan Marek <jonathan@marek.ca>
To: linux-arm-msm@vger.kernel.org
Cc: Andy Gross <agross@kernel.org>,
Bjorn Andersson <bjorn.andersson@linaro.org>,
Rob Herring <robh+dt@kernel.org>,
devicetree@vger.kernel.org (open list:OPEN FIRMWARE AND
FLATTENED DEVICE TREE BINDINGS),
linux-kernel@vger.kernel.org (open list)
Subject: [PATCH 5/6] arm64: dts: qcom: sm8150: add interconnect nodes
Date: Wed, 1 Jul 2020 09:42:54 -0400 [thread overview]
Message-ID: <20200701134259.8055-6-jonathan@marek.ca> (raw)
In-Reply-To: <20200701134259.8055-1-jonathan@marek.ca>
Add the interconnect dts nodes for sm8150.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
---
arch/arm64/boot/dts/qcom/sm8150.dtsi | 118 +++++++++++++++++++++++++++
1 file changed, 118 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi
index 5272e27eca70..747521666700 100644
--- a/arch/arm64/boot/dts/qcom/sm8150.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi
@@ -11,6 +11,7 @@
#include <dt-bindings/clock/qcom,rpmh.h>
#include <dt-bindings/clock/qcom,gcc-sm8150.h>
#include <dt-bindings/clock/qcom,gpucc-sm8150.h>
+#include <dt-bindings/interconnect/qcom,sm8150.h>
/ {
interrupt-parent = <&intc>;
@@ -431,6 +432,75 @@ uart2: serial@a90000 {
};
};
+ dc_noc: interconnect@14e0000 {
+ compatible = "qcom,sm8150-dc-noc";
+ reg = <0 0x014e0000 0 0x1000>;
+ #interconnect-cells = <1>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
+ config_noc: interconnect@1500000 {
+ compatible = "qcom,sm8150-config-noc";
+ reg = <0 0x01500000 0 0x1000>;
+ #interconnect-cells = <1>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
+ camnoc_virt: interconnect@1620000 {
+ compatible = "qcom,sm8150-camnoc-virt";
+ reg = <0 0x01620000 0 0x1000>;
+ #interconnect-cells = <1>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
+ ipa_virt: interconnect-ipa@1620000 {
+ compatible = "qcom,sm8150-ipa-virt";
+ reg = <0 0x01620000 0 0x1000>;
+ #interconnect-cells = <1>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
+ system_noc: interconnect@1629000 {
+ compatible = "qcom,sm8150-system-noc";
+ reg = <0 0x01629000 0 0x1000>;
+ #interconnect-cells = <1>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
+ aggre1_noc: interconnect@16e4000 {
+ compatible = "qcom,sm8150-aggre1-noc";
+ reg = <0 0x016e4000 0 0x1000>;
+ #interconnect-cells = <1>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
+ aggre2_noc: interconnect@1706000 {
+ compatible = "qcom,sm8150-aggre2-noc";
+ reg = <0 0x01706000 0 0x1000>;
+ #interconnect-cells = <1>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
+ compute_noc: interconnect@1720000 {
+ compatible = "qcom,sm8150-compute-noc";
+ reg = <0 0x01720000 0 0x1000>;
+ #interconnect-cells = <1>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
+ mmss_noc: interconnect@1749000 {
+ compatible = "qcom,sm8150-mmss-noc";
+ reg = <0 0x01749000 0 0x1000>;
+ #interconnect-cells = <1>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
+ mmss_noc_display: interconnect-display@1749000 {
+ compatible = "qcom,sm8150-mmss-noc-display";
+ #interconnect-cells = <1>;
+ qcom,bcm-voters = <&disp_bcm_voter>;
+ };
+
ufs_mem_hc: ufshc@1d84000 {
compatible = "qcom,sm8150-ufshc", "qcom,ufshc",
"jedec,ufs-2.0";
@@ -851,6 +921,32 @@ usb_2_ssphy: lane@88eb200 {
};
};
+ mc_virt: interconnect@9680000 {
+ compatible = "qcom,sm8150-mc-virt";
+ reg = <0 0x09680000 0 0x1000>;
+ #interconnect-cells = <1>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
+ mc_virt_display: interconnect-display@9680000 {
+ compatible = "qcom,sm8150-mc-virt-display";
+ #interconnect-cells = <1>;
+ qcom,bcm-voters = <&disp_bcm_voter>;
+ };
+
+ gem_noc: interconnect@96ab000 {
+ compatible = "qcom,sm8150-gem-noc";
+ reg = <0 0x096ab000 0 0x1000>;
+ #interconnect-cells = <1>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
+ gem_noc_display: interconnect-display@96ab000 {
+ compatible = "qcom,sm8150-gem-noc-display";
+ #interconnect-cells = <1>;
+ qcom,bcm-voters = <&disp_bcm_voter>;
+ };
+
usb_1: usb@a6f8800 {
compatible = "qcom,sm8150-dwc3", "qcom,dwc3";
reg = <0 0x0a6f8800 0 0x400>;
@@ -941,6 +1037,24 @@ usb_2_dwc3: dwc3@a800000 {
};
};
+ disp_rsc: rsc@af20000 {
+ label = "display_rsc";
+ compatible = "qcom,rpmh-rsc";
+ reg = <0x0 0xaf20000 0x0 0x10000>;
+ reg-names = "drv-0";
+ interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>;
+ qcom,tcs-offset = <0x1c00>;
+ qcom,drv-id = <0>;
+ qcom,tcs-config = <SLEEP_TCS 1>,
+ <WAKE_TCS 1>,
+ <ACTIVE_TCS 2>,
+ <CONTROL_TCS 0>;
+
+ disp_bcm_voter: bcm_voter {
+ compatible = "qcom,bcm-voter";
+ };
+ };
+
aoss_qmp: power-controller@c300000 {
compatible = "qcom,sm8150-aoss-qmp";
reg = <0x0 0x0c300000 0x0 0x100000>;
@@ -1249,6 +1363,10 @@ rpmhpd_opp_turbo_l1: opp11 {
};
};
};
+
+ apps_bcm_voter: bcm_voter {
+ compatible = "qcom,bcm-voter";
+ };
};
cpufreq_hw: cpufreq@18323000 {
--
2.26.1
next prev parent reply other threads:[~2020-07-01 13:45 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-07-01 13:42 [PATCH 0/6] Add SM8150 and SM8250 interconnect drivers Jonathan Marek
2020-07-01 13:42 ` [PATCH 1/6] dt-bindings: interconnect: Add Qualcomm SM8150 DT bindings Jonathan Marek
2020-07-02 20:48 ` Rob Herring
2020-07-01 13:42 ` [PATCH 2/6] dt-bindings: interconnect: Add Qualcomm SM8250 " Jonathan Marek
2020-07-02 20:49 ` Rob Herring
2020-07-02 20:49 ` Rob Herring
2020-07-01 13:42 ` [PATCH 3/6] interconnect: qcom: Add SM8150 interconnect provider driver Jonathan Marek
2020-07-01 13:42 ` [PATCH 4/6] interconnect: qcom: Add SM8250 " Jonathan Marek
2020-07-13 13:30 ` Georgi Djakov
2020-07-13 13:47 ` Jonathan Marek
2020-07-13 14:19 ` Georgi Djakov
2020-07-01 13:42 ` Jonathan Marek [this message]
2020-07-01 13:42 ` [PATCH 6/6] arm64: dts: qcom: sm8250: add interconnect nodes Jonathan Marek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200701134259.8055-6-jonathan@marek.ca \
--to=jonathan@marek.ca \
--cc=agross@kernel.org \
--cc=bjorn.andersson@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox