From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-10.1 required=3.0 tests=DKIM_SIGNED,DKIM_VALID, DKIM_VALID_AU,HEADER_FROM_DIFFERENT_DOMAINS,INCLUDES_PATCH,MAILING_LIST_MULTI, SIGNED_OFF_BY,SPF_HELO_NONE,SPF_PASS,URIBL_BLOCKED,USER_AGENT_GIT autolearn=ham autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id 39D3DC433DF for ; Wed, 1 Jul 2020 21:24:09 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id 1662C20853 for ; Wed, 1 Jul 2020 21:24:09 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (1024-bit key) header.d=walle.cc header.i=@walle.cc header.b="X82jdnmb" Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1727807AbgGAVYH (ORCPT ); Wed, 1 Jul 2020 17:24:07 -0400 Received: from ssl.serverraum.org ([176.9.125.105]:39553 "EHLO ssl.serverraum.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1725915AbgGAVYG (ORCPT ); Wed, 1 Jul 2020 17:24:06 -0400 Received: from apollo.fritz.box (unknown [IPv6:2a02:810c:c200:2e91:6257:18ff:fec4:ca34]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) key-exchange ECDHE (P-384) server-signature RSA-PSS (2048 bits) server-digest SHA256) (No client certificate requested) by ssl.serverraum.org (Postfix) with ESMTPSA id 1343D22EDB; Wed, 1 Jul 2020 23:24:03 +0200 (CEST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=walle.cc; s=mail2016061301; t=1593638643; h=from:from:reply-to:subject:subject:date:date:message-id:message-id: to:to:cc:cc:mime-version:mime-version: content-transfer-encoding:content-transfer-encoding; bh=+3aEdivimryDZBSKjFuPi0PkZcAYhem+hA7t/pdN/sY=; b=X82jdnmbqI/hR8u+2IN9Ggbgl5DkVS5CdNPWFss7FGcvl+RXWvdXiy1l9Cm8G0U/eOH4/Y Qw5DmCy9P6SF8jxSqSD4Zi4ASzpLGah1WH3MzaN40cyeaNRPlNXGJnRBBMoitoitbUuu/b bfHfBASiwaOWvE1hwMmObX1DxDOjDwc= From: Michael Walle To: linux-kernel@vger.kernel.org Cc: Lee Jones , Michael Walle , Sourav Poddar Subject: [PATCH] mfd: remove smsc-ece1099 MFD driver Date: Wed, 1 Jul 2020 23:23:48 +0200 Message-Id: <20200701212348.8085-1-michael@walle.cc> X-Mailer: git-send-email 2.20.1 MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Sender: linux-kernel-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org This MFD driver has no user. The keypad driver of this device never made it into the kernel. Therefore, this driver is useless. Remove it. Signed-off-by: Michael Walle Cc: Sourav Poddar --- Documentation/driver-api/index.rst | 1 - Documentation/driver-api/smsc_ece1099.rst | 60 ------------- drivers/mfd/Kconfig | 12 --- drivers/mfd/Makefile | 1 - drivers/mfd/smsc-ece1099.c | 87 ------------------ include/linux/mfd/smsc.h | 104 ---------------------- 6 files changed, 265 deletions(-) delete mode 100644 Documentation/driver-api/smsc_ece1099.rst delete mode 100644 drivers/mfd/smsc-ece1099.c delete mode 100644 include/linux/mfd/smsc.h diff --git a/Documentation/driver-api/index.rst b/Documentation/driver-api/index.rst index 6567187e7687..1397a30188eb 100644 --- a/Documentation/driver-api/index.rst +++ b/Documentation/driver-api/index.rst @@ -98,7 +98,6 @@ available subsections can be seen below. rfkill serial/index sm501 - smsc_ece1099 switchtec sync_file vfio-mediated-device diff --git a/Documentation/driver-api/smsc_ece1099.rst b/Documentation/driver-api/smsc_ece1099.rst deleted file mode 100644 index 079277421eaf..000000000000 --- a/Documentation/driver-api/smsc_ece1099.rst +++ /dev/null @@ -1,60 +0,0 @@ -================================================= -Msc Keyboard Scan Expansion/GPIO Expansion device -================================================= - -What is smsc-ece1099? ----------------------- - -The ECE1099 is a 40-Pin 3.3V Keyboard Scan Expansion -or GPIO Expansion device. The device supports a keyboard -scan matrix of 23x8. The device is connected to a Master -via the SMSC BC-Link interface or via the SMBus. -Keypad scan Input(KSI) and Keypad Scan Output(KSO) signals -are multiplexed with GPIOs. - -Interrupt generation --------------------- - -Interrupts can be generated by an edge detection on a GPIO -pin or an edge detection on one of the bus interface pins. -Interrupts can also be detected on the keyboard scan interface. -The bus interrupt pin (BC_INT# or SMBUS_INT#) is asserted if -any bit in one of the Interrupt Status registers is 1 and -the corresponding Interrupt Mask bit is also 1. - -In order for software to determine which device is the source -of an interrupt, it should first read the Group Interrupt Status Register -to determine which Status register group is a source for the interrupt. -Software should read both the Status register and the associated Mask register, -then AND the two values together. Bits that are 1 in the result of the AND -are active interrupts. Software clears an interrupt by writing a 1 to the -corresponding bit in the Status register. - -Communication Protocol ----------------------- - -- SMbus slave Interface - The host processor communicates with the ECE1099 device - through a series of read/write registers via the SMBus - interface. SMBus is a serial communication protocol between - a computer host and its peripheral devices. The SMBus data - rate is 10KHz minimum to 400 KHz maximum - -- Slave Bus Interface - The ECE1099 device SMBus implementation is a subset of the - SMBus interface to the host. The device is a slave-only SMBus device. - The implementation in the device is a subset of SMBus since it - only supports four protocols. - - The Write Byte, Read Byte, Send Byte, and Receive Byte protocols are the - only valid SMBus protocols for the device. - -- BC-LinkTM Interface - The BC-Link is a proprietary bus that allows communication - between a Master device and a Companion device. The Master - device uses this serial bus to read and write registers - located on the Companion device. The bus comprises three signals, - BC_CLK, BC_DAT and BC_INT#. The Master device always provides the - clock, BC_CLK, and the Companion device is the source for an - independent asynchronous interrupt signal, BC_INT#. The ECE1099 - supports BC-Link speeds up to 24MHz. diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index be8053d6fa1f..7e72ed3441f1 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -1193,18 +1193,6 @@ config MFD_SKY81452 This driver can also be built as a module. If so, the module will be called sky81452. -config MFD_SMSC - bool "SMSC ECE1099 series chips" - depends on I2C=y - select MFD_CORE - select REGMAP_I2C - help - If you say yes here you get support for the - ece1099 chips from SMSC. - - To compile this driver as a module, choose M here: the - module will be called smsc. - config MFD_SC27XX_PMIC tristate "Spreadtrum SC27xx PMICs" depends on ARCH_SPRD || COMPILE_TEST diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index 9e6e18336f14..7e26e7f98ac2 100644 --- a/drivers/mfd/Makefile +++ b/drivers/mfd/Makefile @@ -127,7 +127,6 @@ obj-$(CONFIG_MFD_CPCAP) += motorola-cpcap.o obj-$(CONFIG_MCP) += mcp-core.o obj-$(CONFIG_MCP_SA11X0) += mcp-sa11x0.o obj-$(CONFIG_MCP_UCB1200) += ucb1x00-core.o -obj-$(CONFIG_MFD_SMSC) += smsc-ece1099.o obj-$(CONFIG_MCP_UCB1200_TS) += ucb1x00-ts.o ifeq ($(CONFIG_SA1100_ASSABET),y) diff --git a/drivers/mfd/smsc-ece1099.c b/drivers/mfd/smsc-ece1099.c deleted file mode 100644 index 57b792eb58fd..000000000000 --- a/drivers/mfd/smsc-ece1099.c +++ /dev/null @@ -1,87 +0,0 @@ -/* - * TI SMSC MFD Driver - * - * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com - * - * Author: Sourav Poddar - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; GPL v2. - * - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -static const struct regmap_config smsc_regmap_config = { - .reg_bits = 8, - .val_bits = 8, - .max_register = SMSC_VEN_ID_H, - .cache_type = REGCACHE_RBTREE, -}; - -static int smsc_i2c_probe(struct i2c_client *i2c, - const struct i2c_device_id *id) -{ - struct smsc *smsc; - int devid, rev, venid_l, venid_h; - int ret; - - smsc = devm_kzalloc(&i2c->dev, sizeof(*smsc), GFP_KERNEL); - if (!smsc) - return -ENOMEM; - - smsc->regmap = devm_regmap_init_i2c(i2c, &smsc_regmap_config); - if (IS_ERR(smsc->regmap)) - return PTR_ERR(smsc->regmap); - - i2c_set_clientdata(i2c, smsc); - smsc->dev = &i2c->dev; - -#ifdef CONFIG_OF - of_property_read_u32(i2c->dev.of_node, "clock", &smsc->clk); -#endif - - regmap_read(smsc->regmap, SMSC_DEV_ID, &devid); - regmap_read(smsc->regmap, SMSC_DEV_REV, &rev); - regmap_read(smsc->regmap, SMSC_VEN_ID_L, &venid_l); - regmap_read(smsc->regmap, SMSC_VEN_ID_H, &venid_h); - - dev_info(&i2c->dev, "SMSCxxx devid: %02x rev: %02x venid: %02x\n", - devid, rev, (venid_h << 8) | venid_l); - - ret = regmap_write(smsc->regmap, SMSC_CLK_CTRL, smsc->clk); - if (ret) - return ret; - -#ifdef CONFIG_OF - if (i2c->dev.of_node) - ret = devm_of_platform_populate(&i2c->dev); -#endif - - return ret; -} - -static const struct i2c_device_id smsc_i2c_id[] = { - { "smscece1099", 0}, - {}, -}; - -static struct i2c_driver smsc_i2c_driver = { - .driver = { - .name = "smsc", - }, - .probe = smsc_i2c_probe, - .id_table = smsc_i2c_id, -}; -builtin_i2c_driver(smsc_i2c_driver); diff --git a/include/linux/mfd/smsc.h b/include/linux/mfd/smsc.h deleted file mode 100644 index 83944124e886..000000000000 --- a/include/linux/mfd/smsc.h +++ /dev/null @@ -1,104 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-or-later */ -/* - * SMSC ECE1099 - * - * Copyright 2012 Texas Instruments Inc. - * - * Author: Sourav Poddar - */ - -#ifndef __LINUX_MFD_SMSC_H -#define __LINUX_MFD_SMSC_H - -#include - -#define SMSC_ID_ECE1099 1 -#define SMSC_NUM_CLIENTS 2 - -#define SMSC_BASE_ADDR 0x38 -#define OMAP_GPIO_SMSC_IRQ 151 - -#define SMSC_MAXGPIO 32 -#define SMSC_BANK(offs) ((offs) >> 3) -#define SMSC_BIT(offs) (1u << ((offs) & 0x7)) - -struct smsc { - struct device *dev; - struct i2c_client *i2c_clients[SMSC_NUM_CLIENTS]; - struct regmap *regmap; - int clk; - /* Stored chip id */ - int id; -}; - -struct smsc_gpio; -struct smsc_keypad; - -static inline int smsc_read(struct device *child, unsigned int reg, - unsigned int *dest) -{ - struct smsc *smsc = dev_get_drvdata(child->parent); - - return regmap_read(smsc->regmap, reg, dest); -} - -static inline int smsc_write(struct device *child, unsigned int reg, - unsigned int value) -{ - struct smsc *smsc = dev_get_drvdata(child->parent); - - return regmap_write(smsc->regmap, reg, value); -} - -/* Registers for SMSC */ -#define SMSC_RESET 0xF5 -#define SMSC_GRP_INT 0xF9 -#define SMSC_CLK_CTRL 0xFA -#define SMSC_WKUP_CTRL 0xFB -#define SMSC_DEV_ID 0xFC -#define SMSC_DEV_REV 0xFD -#define SMSC_VEN_ID_L 0xFE -#define SMSC_VEN_ID_H 0xFF - -/* CLK VALUE */ -#define SMSC_CLK_VALUE 0x13 - -/* Registers for function GPIO INPUT */ -#define SMSC_GPIO_DATA_IN_START 0x00 - -/* Registers for function GPIO OUPUT */ -#define SMSC_GPIO_DATA_OUT_START 0x05 - -/* Definitions for SMSC GPIO CONFIGURATION REGISTER*/ -#define SMSC_GPIO_INPUT_LOW 0x01 -#define SMSC_GPIO_INPUT_RISING 0x09 -#define SMSC_GPIO_INPUT_FALLING 0x11 -#define SMSC_GPIO_INPUT_BOTH_EDGE 0x19 -#define SMSC_GPIO_OUTPUT_PP 0x21 -#define SMSC_GPIO_OUTPUT_OP 0x31 - -#define GRP_INT_STAT 0xf9 -#define SMSC_GPI_INT 0x0f -#define SMSC_CFG_START 0x0A - -/* Registers for SMSC GPIO INTERRUPT STATUS REGISTER*/ -#define SMSC_GPIO_INT_STAT_START 0x32 - -/* Registers for SMSC GPIO INTERRUPT MASK REGISTER*/ -#define SMSC_GPIO_INT_MASK_START 0x37 - -/* Registers for SMSC function KEYPAD*/ -#define SMSC_KP_OUT 0x40 -#define SMSC_KP_IN 0x41 -#define SMSC_KP_INT_STAT 0x42 -#define SMSC_KP_INT_MASK 0x43 - -/* Definitions for keypad */ -#define SMSC_KP_KSO 0x70 -#define SMSC_KP_KSI 0x51 -#define SMSC_KSO_ALL_LOW 0x20 -#define SMSC_KP_SET_LOW_PWR 0x0B -#define SMSC_KP_SET_HIGH 0xFF -#define SMSC_KSO_EVAL 0x00 - -#endif /* __LINUX_MFD_SMSC_H */ -- 2.20.1