[PATCH v2 2/8] arm64: dts: exynos: Describe PWM interrupts on Exynos7

Krzysztof Kozlowski
2020-07-02T15:52:05Z

Add interrupts property to PWM node on Exynos7 to describe the hardware
fully. No functional change as the interrupts are not used by drivers.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>

---

Changes since v1:
1. Correct the interrupts, change message.

Not tested
---
arch/arm64/boot/dts/exynos/exynos7.dtsi | 5 +++++
1 file changed, 5 insertions(+)

diff --git a/arch/arm64/boot/dts/exynos/exynos7.dtsi b/arch/arm64/boot/dts/exynos/exynos7.dtsi
index f590891efe25..709742b98c9c 100644
--- a/arch/arm64/boot/dts/exynos/exynos7.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos7.dtsi
@@ -581,6 +581,11 @@
pwm: pwm@136c0000 {
compatible = "samsung,exynos4210-pwm";
reg = <0x136c0000 0x100>;
+ interrupts = <GIC_SPI 449 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 450 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 451 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 452 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 453 IRQ_TYPE_LEVEL_HIGH>;
samsung,pwm-outputs = <0>, <1>, <2>, <3>;
#pwm-cells = <3>;
clocks = <&clock_peric0 PCLK_PWM>;
--
2.17.1