public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Guenter Roeck <linux@roeck-us.net>
To: "Alexander A. Klimov" <grandmaster@al2klimov.de>
Cc: jdelvare@suse.com, robh+dt@kernel.org,
	etremblay@distech-controls.com, corbet@lwn.net,
	linux-hwmon@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, linux-doc@vger.kernel.org
Subject: Re: [PATCH] Replace HTTP links with HTTPS ones: TMP513 hardware monitor driver
Date: Fri, 3 Jul 2020 15:20:56 -0700	[thread overview]
Message-ID: <20200703222056.GA35408@roeck-us.net> (raw)
In-Reply-To: <20200703185657.15329-1-grandmaster@al2klimov.de>

On Fri, Jul 03, 2020 at 08:56:57PM +0200, Alexander A. Klimov wrote:
> Rationale:
> Reduces attack surface on kernel devs opening the links for MITM
> as HTTPS traffic is much harder to manipulate.
> 
> Deterministic algorithm:
> For each file:
>   If not .svg:
>     For each line:
>       If doesn't contain `\bxmlns\b`:
>         For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
>           If both the HTTP and HTTPS versions
>           return 200 OK and serve the same content:
>             Replace HTTP with HTTPS.
> 
> Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>

Applied, after adjusting subject line to match the expected
hwmon subsystem form.

Guenter

> ---
>  Continuing my work started at 93431e0607e5.
> 
>  If there are any URLs to be removed completely or at least not HTTPSified:
>  Just clearly say so and I'll *undo my change*.
>  See also https://lkml.org/lkml/2020/6/27/64
> 
>  If there are any valid, but yet not changed URLs:
>  See https://lkml.org/lkml/2020/6/26/837
> 
>  Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml | 4 ++--
>  Documentation/hwmon/tmp513.rst                         | 4 ++--
>  drivers/hwmon/tmp513.c                                 | 4 ++--
>  3 files changed, 6 insertions(+), 6 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml b/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml
> index 90b2fa3f7752..c17e5d3ee3f1 100644
> --- a/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml
> +++ b/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml
> @@ -18,8 +18,8 @@ description: |
>    consumption.
>  
>    Datasheets:
> -  http://www.ti.com/lit/gpn/tmp513
> -  http://www.ti.com/lit/gpn/tmp512
> +  https://www.ti.com/lit/gpn/tmp513
> +  https://www.ti.com/lit/gpn/tmp512
>  
>  
>  properties:
> diff --git a/Documentation/hwmon/tmp513.rst b/Documentation/hwmon/tmp513.rst
> index 6c8fae4b1a75..f2dfc1677ad9 100644
> --- a/Documentation/hwmon/tmp513.rst
> +++ b/Documentation/hwmon/tmp513.rst
> @@ -9,13 +9,13 @@ Supported chips:
>  
>      Prefix: 'tmp512'
>  
> -    Datasheet: http://www.ti.com/lit/ds/symlink/tmp512.pdf
> +    Datasheet: https://www.ti.com/lit/ds/symlink/tmp512.pdf
>  
>    * Texas Instruments TMP513
>  
>      Prefix: 'tmp513'
>  
> -    Datasheet: http://www.ti.com/lit/ds/symlink/tmp513.pdf
> +    Datasheet: https://www.ti.com/lit/ds/symlink/tmp513.pdf
>  
>  Authors:
>  
> diff --git a/drivers/hwmon/tmp513.c b/drivers/hwmon/tmp513.c
> index df66e0bc1253..23908dc5611b 100644
> --- a/drivers/hwmon/tmp513.c
> +++ b/drivers/hwmon/tmp513.c
> @@ -5,12 +5,12 @@
>   * TMP513:
>   * Thermal/Power Management with Triple Remote and
>   * Local Temperature Sensor and Current Shunt Monitor
> - * Datasheet: http://www.ti.com/lit/gpn/tmp513
> + * Datasheet: https://www.ti.com/lit/gpn/tmp513
>   *
>   * TMP512:
>   * Thermal/Power Management with Dual Remote
>   *	and Local Temperature Sensor and Current Shunt Monitor
> - * Datasheet: http://www.ti.com/lit/gpn/tmp512
> + * Datasheet: https://www.ti.com/lit/gpn/tmp512
>   *
>   * Copyright (C) 2019 Eric Tremblay <etremblay@distech-controls.com>
>   *

      reply	other threads:[~2020-07-03 22:21 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-07-03 18:56 [PATCH] Replace HTTP links with HTTPS ones: TMP513 hardware monitor driver Alexander A. Klimov
2020-07-03 22:20 ` Guenter Roeck [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200703222056.GA35408@roeck-us.net \
    --to=linux@roeck-us.net \
    --cc=corbet@lwn.net \
    --cc=devicetree@vger.kernel.org \
    --cc=etremblay@distech-controls.com \
    --cc=grandmaster@al2klimov.de \
    --cc=jdelvare@suse.com \
    --cc=linux-doc@vger.kernel.org \
    --cc=linux-hwmon@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox