[PATCH 6/6] phy: stm32: use NULL instead of zero

Vinod Koul
2020-07-08T13:28:38Z

devm_clk_get() and devm_reset_control_get() expect a const char *id for
the last arg, but a value of zero was provided. This results in below
sparse warning:

drivers/phy/st/phy-stm32-usbphyc.c:330:42: warning: Using plain integer as NULL pointer
drivers/phy/st/phy-stm32-usbphyc.c:343:52: warning: Using plain integer as NULL pointer

Instead of zero, use NULL

Cc: Amelie Delaunay <amelie.delaunay@st.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
---
drivers/phy/st/phy-stm32-usbphyc.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/phy/st/phy-stm32-usbphyc.c b/drivers/phy/st/phy-stm32-usbphyc.c
index 56bdea4b0bd9..2b3639cba51a 100644
--- a/drivers/phy/st/phy-stm32-usbphyc.c
+++ b/drivers/phy/st/phy-stm32-usbphyc.c
@@ -327,7 +327,7 @@ static int stm32_usbphyc_probe(struct platform_device *pdev)
if (IS_ERR(usbphyc->base))
return PTR_ERR(usbphyc->base);

- usbphyc->clk = devm_clk_get(dev, 0);
+ usbphyc->clk = devm_clk_get(dev, NULL);
if (IS_ERR(usbphyc->clk)) {
ret = PTR_ERR(usbphyc->clk);
dev_err(dev, "clk get failed: %d\n", ret);
@@ -340,7 +340,7 @@ static int stm32_usbphyc_probe(struct platform_device *pdev)
return ret;
}

- usbphyc->rst = devm_reset_control_get(dev, 0);
+ usbphyc->rst = devm_reset_control_get(dev, NULL);
if (!IS_ERR(usbphyc->rst)) {
reset_control_assert(usbphyc->rst);
udelay(2);
--
2.26.2