[PATCH 5/6] phy: exynos5-usbdrd: use correct format for structure description

[Vinod Koul <vkoul@kernel.org>]

We get warning with W=1 build:
drivers/phy/samsung/phy-exynos5-usbdrd.c:211: warning: Function
parameter or member 'phys' not described in 'exynos5_usbdrd_phy'
drivers/phy/samsung/phy-exynos5-usbdrd.c:211: warning: Function
parameter or member 'vbus' not described in 'exynos5_usbdrd_phy'
drivers/phy/samsung/phy-exynos5-usbdrd.c:211: warning: Function
parameter or member 'vbus_boost' not described in 'exynos5_usbdrd_phy'

These members are provided with description but format is not quite
right resulting in above warnings

Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
---
 drivers/phy/samsung/phy-exynos5-usbdrd.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/phy/samsung/phy-exynos5-usbdrd.c b/drivers/phy/samsung/phy-exynos5-usbdrd.c
index eb06ce9f748f..bfb0e8914103 100644
--- a/drivers/phy/samsung/phy-exynos5-usbdrd.c
+++ b/drivers/phy/samsung/phy-exynos5-usbdrd.c
@@ -180,14 +180,14 @@ struct exynos5_usbdrd_phy_drvdata {
  * @utmiclk: clock for utmi+ phy
  * @itpclk: clock for ITP generation
  * @drv_data: pointer to SoC level driver data structure
- * @phys[]: array for 'EXYNOS5_DRDPHYS_NUM' number of PHY
+ * @phys: array for 'EXYNOS5_DRDPHYS_NUM' number of PHY
  *	    instances each with its 'phy' and 'phy_cfg'.
  * @extrefclk: frequency select settings when using 'separate
  *	       reference clocks' for SS and HS operations
  * @ref_clk: reference clock to PHY block from which PHY's
  *	     operational clocks are derived
- * vbus: VBUS regulator for phy
- * vbus_boost: Boost regulator for VBUS present on few Exynos boards
+ * @vbus: VBUS regulator for phy
+ * @vbus_boost: Boost regulator for VBUS present on few Exynos boards
  */
 struct exynos5_usbdrd_phy {
 	struct device *dev;
-- 
2.26.2