public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Stefano Stabellini <sstabellini@kernel.org>
To: jgross@suse.com, boris.ostrovsky@oracle.com, konrad.wilk@oracle.com
Cc: sstabellini@kernel.org, xen-devel@lists.xenproject.org,
	linux-kernel@vger.kernel.org, hch@infradead.org,
	Stefano Stabellini <stefano.stabellini@xilinx.com>
Subject: [PATCH v3 03/11] swiotlb-xen: add struct device * parameter to xen_phys_to_bus
Date: Fri, 10 Jul 2020 15:34:19 -0700	[thread overview]
Message-ID: <20200710223427.6897-3-sstabellini@kernel.org> (raw)
In-Reply-To: <alpine.DEB.2.21.2007101521290.4124@sstabellini-ThinkPad-T480s>

From: Stefano Stabellini <stefano.stabellini@xilinx.com>

No functional changes. The parameter is unused in this patch but will be
used by next patches.

Signed-off-by: Stefano Stabellini <stefano.stabellini@xilinx.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Tested-by: Corey Minyard <cminyard@mvista.com>
Tested-by: Roman Shaposhnik <roman@zededa.com>
---
Changes in v3:
- add whitespace in title
- improve commit message
---
 drivers/xen/swiotlb-xen.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/drivers/xen/swiotlb-xen.c b/drivers/xen/swiotlb-xen.c
index 89a775948a02..dbe710a59bf2 100644
--- a/drivers/xen/swiotlb-xen.c
+++ b/drivers/xen/swiotlb-xen.c
@@ -57,7 +57,7 @@ static unsigned long xen_io_tlb_nslabs;
  * can be 32bit when dma_addr_t is 64bit leading to a loss in
  * information if the shift is done before casting to 64bit.
  */
-static inline dma_addr_t xen_phys_to_bus(phys_addr_t paddr)
+static inline dma_addr_t xen_phys_to_bus(struct device *dev, phys_addr_t paddr)
 {
 	unsigned long bfn = pfn_to_bfn(XEN_PFN_DOWN(paddr));
 	dma_addr_t dma = (dma_addr_t)bfn << XEN_PAGE_SHIFT;
@@ -78,9 +78,9 @@ static inline phys_addr_t xen_bus_to_phys(dma_addr_t baddr)
 	return paddr;
 }
 
-static inline dma_addr_t xen_virt_to_bus(void *address)
+static inline dma_addr_t xen_virt_to_bus(struct device *dev, void *address)
 {
-	return xen_phys_to_bus(virt_to_phys(address));
+	return xen_phys_to_bus(dev, virt_to_phys(address));
 }
 
 static inline int range_straddles_page_boundary(phys_addr_t p, size_t size)
@@ -309,7 +309,7 @@ xen_swiotlb_alloc_coherent(struct device *hwdev, size_t size,
 	 * Do not use virt_to_phys(ret) because on ARM it doesn't correspond
 	 * to *dma_handle. */
 	phys = *dma_handle;
-	dev_addr = xen_phys_to_bus(phys);
+	dev_addr = xen_phys_to_bus(hwdev, phys);
 	if (((dev_addr + size - 1 <= dma_mask)) &&
 	    !range_straddles_page_boundary(phys, size))
 		*dma_handle = dev_addr;
@@ -370,7 +370,7 @@ static dma_addr_t xen_swiotlb_map_page(struct device *dev, struct page *page,
 				unsigned long attrs)
 {
 	phys_addr_t map, phys = page_to_phys(page) + offset;
-	dma_addr_t dev_addr = xen_phys_to_bus(phys);
+	dma_addr_t dev_addr = xen_phys_to_bus(dev, phys);
 
 	BUG_ON(dir == DMA_NONE);
 	/*
@@ -395,7 +395,7 @@ static dma_addr_t xen_swiotlb_map_page(struct device *dev, struct page *page,
 		return DMA_MAPPING_ERROR;
 
 	phys = map;
-	dev_addr = xen_phys_to_bus(map);
+	dev_addr = xen_phys_to_bus(dev, map);
 
 	/*
 	 * Ensure that the address returned is DMA'ble
@@ -539,7 +539,7 @@ xen_swiotlb_sync_sg_for_device(struct device *dev, struct scatterlist *sgl,
 static int
 xen_swiotlb_dma_supported(struct device *hwdev, u64 mask)
 {
-	return xen_virt_to_bus(xen_io_tlb_end - 1) <= mask;
+	return xen_virt_to_bus(hwdev, xen_io_tlb_end - 1) <= mask;
 }
 
 const struct dma_map_ops xen_swiotlb_dma_ops = {
-- 
2.17.1


  parent reply	other threads:[~2020-07-10 22:34 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-07-10 22:34 [PATCH v3 00/11] fix swiotlb-xen for RPi4 Stefano Stabellini
2020-07-10 22:34 ` [PATCH v3 01/11] swiotlb-xen: use vmalloc_to_page on vmalloc virt addresses Stefano Stabellini
2020-07-10 22:34 ` [PATCH v3 02/11] swiotlb-xen: remove start_dma_addr Stefano Stabellini
2020-07-10 22:34 ` Stefano Stabellini [this message]
2020-07-10 22:34 ` [PATCH v3 04/11] swiotlb-xen: add struct device * parameter to xen_bus_to_phys Stefano Stabellini
2020-07-10 22:34 ` [PATCH v3 05/11] swiotlb-xen: add struct device * parameter to xen_dma_sync_for_cpu Stefano Stabellini
2020-07-10 22:34 ` [PATCH v3 06/11] swiotlb-xen: add struct device * parameter to xen_dma_sync_for_device Stefano Stabellini
2020-07-10 22:34 ` [PATCH v3 07/11] swiotlb-xen: add struct device * parameter to is_xen_swiotlb_buffer Stefano Stabellini
2020-07-10 22:34 ` [PATCH v3 08/11] swiotlb-xen: remove XEN_PFN_PHYS Stefano Stabellini
2020-08-04  5:33   ` Jürgen Groß
2020-07-10 22:34 ` [PATCH v3 09/11] swiotlb-xen: introduce phys_to_dma/dma_to_phys translations Stefano Stabellini
2020-08-04  5:34   ` Jürgen Groß
2020-07-10 22:34 ` [PATCH v3 10/11] xen/arm: introduce phys/dma translations in xen_dma_sync_for_* Stefano Stabellini
2020-08-04  5:35   ` Jürgen Groß
2020-07-10 22:34 ` [PATCH v3 11/11] xen/arm: call dma_to_phys on the dma_addr_t parameter of dma_cache_maint Stefano Stabellini
2020-08-04  5:56 ` [PATCH v3 00/11] fix swiotlb-xen for RPi4 Jürgen Groß
2020-08-04 15:52   ` Stefano Stabellini

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200710223427.6897-3-sstabellini@kernel.org \
    --to=sstabellini@kernel.org \
    --cc=boris.ostrovsky@oracle.com \
    --cc=hch@infradead.org \
    --cc=jgross@suse.com \
    --cc=konrad.wilk@oracle.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=stefano.stabellini@xilinx.com \
    --cc=xen-devel@lists.xenproject.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox