[PATCH AUTOSEL 4.14 01/12] gpio: arizona: handle pm_runtime_get_sync failure case

[PATCH AUTOSEL 4.14 01/12] gpio: arizona: handle pm_runtime_get_sync failure case

[Sasha Levin]

From: Navid Emamdoost <navid.emamdoost@gmail.com>

[ Upstream commit e6f390a834b56583e6fc0949822644ce92fbb107 ]

Calling pm_runtime_get_sync increments the counter even in case of
failure, causing incorrect ref count. Call pm_runtime_put if
pm_runtime_get_sync fails.

Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20200605025207.65719-1-navid.emamdoost@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpio/gpio-arizona.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/gpio/gpio-arizona.c b/drivers/gpio/gpio-arizona.c
index d4e6ba0301bc3..e09834b91ea52 100644
--- a/drivers/gpio/gpio-arizona.c
+++ b/drivers/gpio/gpio-arizona.c
@@ -111,6 +111,7 @@ static int arizona_gpio_direction_out(struct gpio_chip *chip,
 		ret = pm_runtime_get_sync(chip->parent);
 		if (ret < 0) {
 			dev_err(chip->parent, "Failed to resume: %d\n", ret);
+			pm_runtime_put(chip->parent);
 			return ret;
 		}
 	}
-- 
2.25.1

[PATCH AUTOSEL 4.14 02/12] gpio: arizona: put pm_runtime in case of failure

[Sasha Levin]

From: Navid Emamdoost <navid.emamdoost@gmail.com>

[ Upstream commit 861254d826499944cb4d9b5a15f5a794a6b99a69 ]

Calling pm_runtime_get_sync increments the counter even in case of
failure, causing incorrect ref count if pm_runtime_put is not called in
error handling paths. Call pm_runtime_put if pm_runtime_get_sync fails.

Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20200605030052.78235-1-navid.emamdoost@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpio/gpio-arizona.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/gpio/gpio-arizona.c b/drivers/gpio/gpio-arizona.c
index e09834b91ea52..694674dfbf82a 100644
--- a/drivers/gpio/gpio-arizona.c
+++ b/drivers/gpio/gpio-arizona.c
@@ -69,6 +69,7 @@ static int arizona_gpio_get(struct gpio_chip *chip, unsigned offset)
 		ret = pm_runtime_get_sync(chip->parent);
 		if (ret < 0) {
 			dev_err(chip->parent, "Failed to resume: %d\n", ret);
+			pm_runtime_put_autosuspend(chip->parent);
 			return ret;
 		}
 
@@ -77,12 +78,15 @@ static int arizona_gpio_get(struct gpio_chip *chip, unsigned offset)
 		if (ret < 0) {
 			dev_err(chip->parent, "Failed to drop cache: %d\n",
 				ret);
+			pm_runtime_put_autosuspend(chip->parent);
 			return ret;
 		}
 
 		ret = regmap_read(arizona->regmap, reg, &val);
-		if (ret < 0)
+		if (ret < 0) {
+			pm_runtime_put_autosuspend(chip->parent);
 			return ret;
+		}
 
 		pm_runtime_mark_last_busy(chip->parent);
 		pm_runtime_put_autosuspend(chip->parent);
-- 
2.25.1

[PATCH AUTOSEL 4.14 03/12] pinctrl: amd: fix npins for uart0 in kerncz_groups

[Sasha Levin]

From: Jacky Hu <hengqing.hu@gmail.com>

[ Upstream commit 69339d083dfb7786b0e0b3fc19eaddcf11fabdfb ]

uart0_pins is defined as:
static const unsigned uart0_pins[] = {135, 136, 137, 138, 139};

which npins is wronly specified as 9 later
	{
		.name = "uart0",
		.pins = uart0_pins,
		.npins = 9,
	},

npins should be 5 instead of 9 according to the definition.

Signed-off-by: Jacky Hu <hengqing.hu@gmail.com>
Link: https://lore.kernel.org/r/20200616015024.287683-1-hengqing.hu@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pinctrl/pinctrl-amd.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/pinctrl/pinctrl-amd.h b/drivers/pinctrl/pinctrl-amd.h
index 8fa453a59da5e..884f48f7a6a36 100644
--- a/drivers/pinctrl/pinctrl-amd.h
+++ b/drivers/pinctrl/pinctrl-amd.h
@@ -252,7 +252,7 @@ static const struct amd_pingroup kerncz_groups[] = {
 	{
 		.name = "uart0",
 		.pins = uart0_pins,
-		.npins = 9,
+		.npins = 5,
 	},
 	{
 		.name = "uart1",
-- 
2.25.1

[PATCH AUTOSEL 4.14 04/12] mac80211: allow rx of mesh eapol frames with default rx key

[Sasha Levin]

From: Markus Theil <markus.theil@tu-ilmenau.de>

[ Upstream commit 0b467b63870d9c05c81456aa9bfee894ab2db3b6 ]

Without this patch, eapol frames cannot be received in mesh
mode, when 802.1X should be used. Initially only a MGTK is
defined, which is found and set as rx->key, when there are
no other keys set. ieee80211_drop_unencrypted would then
drop these eapol frames, as they are data frames without
encryption and there exists some rx->key.

Fix this by differentiating between mesh eapol frames and
other data frames with existing rx->key. Allow mesh mesh
eapol frames only if they are for our vif address.

With this patch in-place, ieee80211_rx_h_mesh_fwding continues
after the ieee80211_drop_unencrypted check and notices, that
these eapol frames have to be delivered locally, as they should.

Signed-off-by: Markus Theil <markus.theil@tu-ilmenau.de>
Link: https://lore.kernel.org/r/20200625104214.50319-1-markus.theil@tu-ilmenau.de
[small code cleanups]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/mac80211/rx.c | 26 ++++++++++++++++++++++++++
 1 file changed, 26 insertions(+)

diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c
index 56d7a3dfa543b..04ae9de55d74b 100644
--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
@@ -2120,6 +2120,7 @@ static int ieee80211_802_1x_port_control(struct ieee80211_rx_data *rx)
 
 static int ieee80211_drop_unencrypted(struct ieee80211_rx_data *rx, __le16 fc)
 {
+	struct ieee80211_hdr *hdr = (void *)rx->skb->data;
 	struct sk_buff *skb = rx->skb;
 	struct ieee80211_rx_status *status = IEEE80211_SKB_RXCB(skb);
 
@@ -2130,6 +2131,31 @@ static int ieee80211_drop_unencrypted(struct ieee80211_rx_data *rx, __le16 fc)
 	if (status->flag & RX_FLAG_DECRYPTED)
 		return 0;
 
+	/* check mesh EAPOL frames first */
+	if (unlikely(rx->sta && ieee80211_vif_is_mesh(&rx->sdata->vif) &&
+		     ieee80211_is_data(fc))) {
+		struct ieee80211s_hdr *mesh_hdr;
+		u16 hdr_len = ieee80211_hdrlen(fc);
+		u16 ethertype_offset;
+		__be16 ethertype;
+
+		if (!ether_addr_equal(hdr->addr1, rx->sdata->vif.addr))
+			goto drop_check;
+
+		/* make sure fixed part of mesh header is there, also checks skb len */
+		if (!pskb_may_pull(rx->skb, hdr_len + 6))
+			goto drop_check;
+
+		mesh_hdr = (struct ieee80211s_hdr *)(skb->data + hdr_len);
+		ethertype_offset = hdr_len + ieee80211_get_mesh_hdrlen(mesh_hdr) +
+				   sizeof(rfc1042_header);
+
+		if (skb_copy_bits(rx->skb, ethertype_offset, &ethertype, 2) == 0 &&
+		    ethertype == rx->sdata->control_port_protocol)
+			return 0;
+	}
+
+drop_check:
 	/* Drop unencrypted frames if key is set. */
 	if (unlikely(!ieee80211_has_protected(fc) &&
 		     !ieee80211_is_any_nullfunc(fc) &&
-- 
2.25.1

[PATCH AUTOSEL 4.14 05/12] scsi: scsi_transport_spi: Fix function pointer check

[Sasha Levin]

From: Tom Rix <trix@redhat.com>

[ Upstream commit 5aee52c44d9170591df65fafa1cd408acc1225ce ]

clang static analysis flags several null function pointer problems.

drivers/scsi/scsi_transport_spi.c:374:1: warning: Called function pointer is null (null dereference) [core.CallAndMessage]
spi_transport_max_attr(offset, "%d\n");
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Reviewing the store_spi_store_max macro

	if (i->f->set_##field)
		return -EINVAL;

should be

	if (!i->f->set_##field)
		return -EINVAL;

Link: https://lore.kernel.org/r/20200627133242.21618-1-trix@redhat.com
Reviewed-by: James Bottomley <jejb@linux.ibm.com>
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/scsi_transport_spi.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/scsi/scsi_transport_spi.c b/drivers/scsi/scsi_transport_spi.c
index d0219e36080c3..e626fc2cc7813 100644
--- a/drivers/scsi/scsi_transport_spi.c
+++ b/drivers/scsi/scsi_transport_spi.c
@@ -349,7 +349,7 @@ store_spi_transport_##field(struct device *dev, 			\
 	struct spi_transport_attrs *tp					\
 		= (struct spi_transport_attrs *)&starget->starget_data;	\
 									\
-	if (i->f->set_##field)						\
+	if (!i->f->set_##field)						\
 		return -EINVAL;						\
 	val = simple_strtoul(buf, NULL, 0);				\
 	if (val > tp->max_##field)					\
-- 
2.25.1

[PATCH AUTOSEL 4.14 06/12] xtensa: fix __sync_fetch_and_{and,or}_4 declarations

[Sasha Levin]

From: Max Filippov <jcmvbkbc@gmail.com>

[ Upstream commit 73f9941306d5ce030f3ffc7db425c7b2a798cf8e ]

Building xtensa kernel with gcc-10 produces the following warnings:
  arch/xtensa/kernel/xtensa_ksyms.c:90:15: warning: conflicting types
    for built-in function ‘__sync_fetch_and_and_4’;
    expected ‘unsigned int(volatile void *, unsigned int)’
    [-Wbuiltin-declaration-mismatch]
  arch/xtensa/kernel/xtensa_ksyms.c:96:15: warning: conflicting types
    for built-in function ‘__sync_fetch_and_or_4’;
    expected ‘unsigned int(volatile void *, unsigned int)’
    [-Wbuiltin-declaration-mismatch]

Fix declarations of these functions to avoid the warning.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/xtensa/kernel/xtensa_ksyms.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/xtensa/kernel/xtensa_ksyms.c b/arch/xtensa/kernel/xtensa_ksyms.c
index dc7b470a423a6..58b79e2ea569c 100644
--- a/arch/xtensa/kernel/xtensa_ksyms.c
+++ b/arch/xtensa/kernel/xtensa_ksyms.c
@@ -82,13 +82,13 @@ void __xtensa_libgcc_window_spill(void)
 }
 EXPORT_SYMBOL(__xtensa_libgcc_window_spill);
 
-unsigned long __sync_fetch_and_and_4(unsigned long *p, unsigned long v)
+unsigned int __sync_fetch_and_and_4(volatile void *p, unsigned int v)
 {
 	BUG();
 }
 EXPORT_SYMBOL(__sync_fetch_and_and_4);
 
-unsigned long __sync_fetch_and_or_4(unsigned long *p, unsigned long v)
+unsigned int __sync_fetch_and_or_4(volatile void *p, unsigned int v)
 {
 	BUG();
 }
-- 
2.25.1

[PATCH AUTOSEL 4.14 07/12] xtensa: update *pos in cpuinfo_op.next

[Sasha Levin]

From: Max Filippov <jcmvbkbc@gmail.com>

[ Upstream commit 0d5ab144429e8bd80889b856a44d56ab4a5cd59b ]

Increment *pos in the cpuinfo_op.next to fix the following warning
triggered by cat /proc/cpuinfo:

  seq_file: buggy .next function c_next did not update position index

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/xtensa/kernel/setup.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/arch/xtensa/kernel/setup.c b/arch/xtensa/kernel/setup.c
index 92fb20777bb0e..a19c61b261422 100644
--- a/arch/xtensa/kernel/setup.c
+++ b/arch/xtensa/kernel/setup.c
@@ -711,7 +711,8 @@ c_start(struct seq_file *f, loff_t *pos)
 static void *
 c_next(struct seq_file *f, void *v, loff_t *pos)
 {
-	return NULL;
+	++*pos;
+	return c_start(f, pos);
 }
 
 static void
-- 
2.25.1

[PATCH AUTOSEL 4.14 08/12] drivers/net/wan/lapbether: Fixed the value of hard_header_len

[Sasha Levin]

From: Xie He <xie.he.0141@gmail.com>

[ Upstream commit 9dc829a135fb5927f1519de11286e2bbb79f5b66 ]

When this driver transmits data,
  first this driver will remove a pseudo header of 1 byte,
  then the lapb module will prepend the LAPB header of 2 or 3 bytes,
  then this driver will prepend a length field of 2 bytes,
  then the underlying Ethernet device will prepend its own header.

So, the header length required should be:
  -1 + 3 + 2 + "the header length needed by the underlying device".

This patch fixes kernel panic when this driver is used with AF_PACKET
SOCK_DGRAM sockets.

Signed-off-by: Xie He <xie.he.0141@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wan/lapbether.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wan/lapbether.c b/drivers/net/wan/lapbether.c
index 0e3f8ed84660e..ac34257e9f203 100644
--- a/drivers/net/wan/lapbether.c
+++ b/drivers/net/wan/lapbether.c
@@ -308,7 +308,6 @@ static void lapbeth_setup(struct net_device *dev)
 	dev->netdev_ops	     = &lapbeth_netdev_ops;
 	dev->needs_free_netdev = true;
 	dev->type            = ARPHRD_X25;
-	dev->hard_header_len = 3;
 	dev->mtu             = 1000;
 	dev->addr_len        = 0;
 }
@@ -329,6 +328,14 @@ static int lapbeth_new_device(struct net_device *dev)
 	if (!ndev)
 		goto out;
 
+	/* When transmitting data:
+	 * first this driver removes a pseudo header of 1 byte,
+	 * then the lapb module prepends an LAPB header of at most 3 bytes,
+	 * then this driver prepends a length field of 2 bytes,
+	 * then the underlying Ethernet device prepends its own header.
+	 */
+	ndev->hard_header_len = -1 + 3 + 2 + dev->hard_header_len;
+
 	lapbeth = netdev_priv(ndev);
 	lapbeth->axdev = ndev;
 
-- 
2.25.1

[PATCH AUTOSEL 4.14 09/12] ALSA: hda/hdmi: fix failures at PCM open on Intel ICL and later

[Sasha Levin]

From: Kai Vehmanen <kai.vehmanen@linux.intel.com>

[ Upstream commit 56275036d8185f92eceac7479d48b858ee3dab84 ]

When HDMI PCM devices are opened in a specific order, with at least one
HDMI/DP receiver connected, ALSA PCM open fails to -EBUSY on the
connected monitor, on recent Intel platforms (ICL/JSL and newer). While
this is not a typical sequence, at least Pulseaudio does this every time
when it is started, to discover the available PCMs.

The rootcause is an invalid assumption in hdmi_add_pin(), where the
total number of converters is assumed to be known at the time the
function is called. On older Intel platforms this held true, but after
ICL/JSL, the order how pins and converters are in the subnode list as
returned by snd_hda_get_sub_nodes(), was changed. As a result,
information for some converters was not stored to per_pin->mux_nids.
And this means some pins cannot be connected to all converters, and
application instead gets -EBUSY instead at open.

The assumption that converters are always before pins in the subnode
list, is not really a valid one. Fix the problem in hdmi_parse_codec()
by introducing separate loops for discovering converters and pins.

BugLink: https://github.com/thesofproject/linux/issues/1978
BugLink: https://github.com/thesofproject/linux/issues/2216
BugLink: https://github.com/thesofproject/linux/issues/2217
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200703153818.2808592-1-kai.vehmanen@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/pci/hda/patch_hdmi.c | 36 +++++++++++++++++++++++-------------
 1 file changed, 23 insertions(+), 13 deletions(-)

diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c
index 9e8cfc409b4b3..04420a3bf5eb0 100644
--- a/sound/pci/hda/patch_hdmi.c
+++ b/sound/pci/hda/patch_hdmi.c
@@ -1805,33 +1805,43 @@ static int hdmi_add_cvt(struct hda_codec *codec, hda_nid_t cvt_nid)
 
 static int hdmi_parse_codec(struct hda_codec *codec)
 {
-	hda_nid_t nid;
+	hda_nid_t start_nid;
+	unsigned int caps;
 	int i, nodes;
 
-	nodes = snd_hda_get_sub_nodes(codec, codec->core.afg, &nid);
-	if (!nid || nodes < 0) {
+	nodes = snd_hda_get_sub_nodes(codec, codec->core.afg, &start_nid);
+	if (!start_nid || nodes < 0) {
 		codec_warn(codec, "HDMI: failed to get afg sub nodes\n");
 		return -EINVAL;
 	}
 
-	for (i = 0; i < nodes; i++, nid++) {
-		unsigned int caps;
-		unsigned int type;
+	/*
+	 * hdmi_add_pin() assumes total amount of converters to
+	 * be known, so first discover all converters
+	 */
+	for (i = 0; i < nodes; i++) {
+		hda_nid_t nid = start_nid + i;
 
 		caps = get_wcaps(codec, nid);
-		type = get_wcaps_type(caps);
 
 		if (!(caps & AC_WCAP_DIGITAL))
 			continue;
 
-		switch (type) {
-		case AC_WID_AUD_OUT:
+		if (get_wcaps_type(caps) == AC_WID_AUD_OUT)
 			hdmi_add_cvt(codec, nid);
-			break;
-		case AC_WID_PIN:
+	}
+
+	/* discover audio pins */
+	for (i = 0; i < nodes; i++) {
+		hda_nid_t nid = start_nid + i;
+
+		caps = get_wcaps(codec, nid);
+
+		if (!(caps & AC_WCAP_DIGITAL))
+			continue;
+
+		if (get_wcaps_type(caps) == AC_WID_PIN)
 			hdmi_add_pin(codec, nid);
-			break;
-		}
 	}
 
 	return 0;
-- 
2.25.1

[PATCH AUTOSEL 4.14 10/12] net: usb: qmi_wwan: add support for Quectel EG95 LTE modem

[Sasha Levin]

From: AceLan Kao <acelan.kao@canonical.com>

[ Upstream commit f815dd5cf48b905eeecf0a2b990e9b7ab048b4f1 ]

Add support for Quectel Wireless Solutions Co., Ltd. EG95 LTE modem

T:  Bus=01 Lev=01 Prnt=01 Port=02 Cnt=02 Dev#=  5 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=2c7c ProdID=0195 Rev=03.18
S:  Manufacturer=Android
S:  Product=Android
C:  #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA
I:  If#=0x0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
I:  If#=0x1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
I:  If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
I:  If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
I:  If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)

Signed-off-by: AceLan Kao <acelan.kao@canonical.com>
Acked-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/usb/qmi_wwan.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c
index 32ce50f119076..88b8ba0ad2cda 100644
--- a/drivers/net/usb/qmi_wwan.c
+++ b/drivers/net/usb/qmi_wwan.c
@@ -1294,6 +1294,7 @@ static const struct usb_device_id products[] = {
 	{QMI_QUIRK_SET_DTR(0x1e0e, 0x9001, 5)},	/* SIMCom 7100E, 7230E, 7600E ++ */
 	{QMI_QUIRK_SET_DTR(0x2c7c, 0x0121, 4)},	/* Quectel EC21 Mini PCIe */
 	{QMI_QUIRK_SET_DTR(0x2c7c, 0x0191, 4)},	/* Quectel EG91 */
+	{QMI_QUIRK_SET_DTR(0x2c7c, 0x0195, 4)},	/* Quectel EG95 */
 	{QMI_FIXED_INTF(0x2c7c, 0x0296, 4)},	/* Quectel BG96 */
 	{QMI_QUIRK_SET_DTR(0x2cb7, 0x0104, 4)},	/* Fibocom NL678 series */
 	{QMI_FIXED_INTF(0x0489, 0xe0b4, 0)},	/* Foxconn T77W968 LTE */
-- 
2.25.1

[PATCH AUTOSEL 4.14 11/12] net: sky2: initialize return of gm_phy_read

[Sasha Levin]

From: Tom Rix <trix@redhat.com>

[ Upstream commit 28b18e4eb515af7c6661c3995c6e3c34412c2874 ]

clang static analysis flags this garbage return

drivers/net/ethernet/marvell/sky2.c:208:2: warning: Undefined or garbage value returned to caller [core.uninitialized.UndefReturn]
        return v;
        ^~~~~~~~

static inline u16 gm_phy_read( ...
{
	u16 v;
	__gm_phy_read(hw, port, reg, &v);
	return v;
}

__gm_phy_read can return without setting v.

So handle similar to skge.c's gm_phy_read, initialize v.

Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/marvell/sky2.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/marvell/sky2.c b/drivers/net/ethernet/marvell/sky2.c
index 5046efdad5390..34ae4bf6e7162 100644
--- a/drivers/net/ethernet/marvell/sky2.c
+++ b/drivers/net/ethernet/marvell/sky2.c
@@ -215,7 +215,7 @@ static int __gm_phy_read(struct sky2_hw *hw, unsigned port, u16 reg, u16 *val)
 
 static inline u16 gm_phy_read(struct sky2_hw *hw, unsigned port, u16 reg)
 {
-	u16 v;
+	u16 v = 0;
 	__gm_phy_read(hw, port, reg, &v);
 	return v;
 }
-- 
2.25.1

[PATCH AUTOSEL 4.14 12/12] drm/nouveau/i2c/g94-: increase NV_PMGR_DP_AUXCTL_TRANSACTREQ timeout

[Sasha Levin]

From: Ben Skeggs <bskeggs@redhat.com>

[ Upstream commit 0156e76d388310a490aeb0f2fbb5b284ded3aecc ]

Tegra TRM says worst-case reply time is 1216us, and this should fix some
spurious timeouts that have been popping up.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/nouveau/nvkm/subdev/i2c/auxg94.c   | 4 ++--
 drivers/gpu/drm/nouveau/nvkm/subdev/i2c/auxgm200.c | 4 ++--
 2 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/nouveau/nvkm/subdev/i2c/auxg94.c b/drivers/gpu/drm/nouveau/nvkm/subdev/i2c/auxg94.c
index c8ab1b5741a3e..db7769cb33eba 100644
--- a/drivers/gpu/drm/nouveau/nvkm/subdev/i2c/auxg94.c
+++ b/drivers/gpu/drm/nouveau/nvkm/subdev/i2c/auxg94.c
@@ -118,10 +118,10 @@ g94_i2c_aux_xfer(struct nvkm_i2c_aux *obj, bool retry,
 		if (retries)
 			udelay(400);
 
-		/* transaction request, wait up to 1ms for it to complete */
+		/* transaction request, wait up to 2ms for it to complete */
 		nvkm_wr32(device, 0x00e4e4 + base, 0x00010000 | ctrl);
 
-		timeout = 1000;
+		timeout = 2000;
 		do {
 			ctrl = nvkm_rd32(device, 0x00e4e4 + base);
 			udelay(1);
diff --git a/drivers/gpu/drm/nouveau/nvkm/subdev/i2c/auxgm200.c b/drivers/gpu/drm/nouveau/nvkm/subdev/i2c/auxgm200.c
index 7ef60895f43a7..edb6148cbca04 100644
--- a/drivers/gpu/drm/nouveau/nvkm/subdev/i2c/auxgm200.c
+++ b/drivers/gpu/drm/nouveau/nvkm/subdev/i2c/auxgm200.c
@@ -118,10 +118,10 @@ gm200_i2c_aux_xfer(struct nvkm_i2c_aux *obj, bool retry,
 		if (retries)
 			udelay(400);
 
-		/* transaction request, wait up to 1ms for it to complete */
+		/* transaction request, wait up to 2ms for it to complete */
 		nvkm_wr32(device, 0x00d954 + base, 0x00010000 | ctrl);
 
-		timeout = 1000;
+		timeout = 2000;
 		do {
 			ctrl = nvkm_rd32(device, 0x00d954 + base);
 			udelay(1);
-- 
2.25.1