From: andy.tang@nxp.com
To: shawnguo@kernel.org
Cc: amit.kucheria@linaro.org, leoyang.li@nxp.com, robh+dt@kernel.org,
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, Yuantian Tang <andy.tang@nxp.com>
Subject: [PATCH 2/2 v2] arm64: dts: ls208xa: add more thermal zone support
Date: Wed, 15 Jul 2020 14:49:09 +0800 [thread overview]
Message-ID: <20200715064909.9161-2-andy.tang@nxp.com> (raw)
In-Reply-To: <20200715064909.9161-1-andy.tang@nxp.com>
From: Yuantian Tang <andy.tang@nxp.com>
There are 7 thermal zones in ls208xa soc. Add the other thermal zone
nodes to enable them.
Signed-off-by: Yuantian Tang <andy.tang@nxp.com>
---
v2:
- remove useless alert trip
- add cooling-map to core cluster zones.
.../arm64/boot/dts/freescale/fsl-ls208xa.dtsi | 141 ++++++++++++++++--
1 file changed, 132 insertions(+), 9 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
index 41102dacc2e1..cc36c969dd9d 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
@@ -79,20 +79,62 @@
};
thermal-zones {
- cpu_thermal: cpu-thermal {
+ ddr-controller1 {
polling-delay-passive = <1000>;
polling-delay = <5000>;
+ thermal-sensors = <&tmu 1>;
+ trips {
+ ddr-ctrler1-crit {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+
+ ddr-controller2 {
+ polling-delay-passive = <1000>;
+ polling-delay = <5000>;
+ thermal-sensors = <&tmu 2>;
+
+ trips {
+ ddr-ctrler2-crit {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+
+ ddr-controller3 {
+ polling-delay-passive = <1000>;
+ polling-delay = <5000>;
+ thermal-sensors = <&tmu 3>;
+
+ trips {
+ ddr-ctrler3-crit {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+
+ core-cluster1 {
+ polling-delay-passive = <1000>;
+ polling-delay = <5000>;
thermal-sensors = <&tmu 4>;
trips {
- cpu_alert: cpu-alert {
- temperature = <75000>;
+ core_cluster1_alert: core-cluster1-alert {
+ temperature = <85000>;
hysteresis = <2000>;
type = "passive";
};
- cpu_crit: cpu-crit {
- temperature = <85000>;
+
+ core-cluster1-crit {
+ temperature = <95000>;
hysteresis = <2000>;
type = "critical";
};
@@ -100,14 +142,95 @@
cooling-maps {
map0 {
- trip = <&cpu_alert>;
+ trip = <&core_cluster1_alert>;
cooling-device =
<&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+
+ core-cluster2 {
+ polling-delay-passive = <1000>;
+ polling-delay = <5000>;
+ thermal-sensors = <&tmu 5>;
+
+ trips {
+ core_cluster2_alert: core-cluster2-alert {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ core-cluster2-crit {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&core_cluster2_alert>;
+ cooling-device =
<&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+
+ core-cluster3 {
+ polling-delay-passive = <1000>;
+ polling-delay = <5000>;
+ thermal-sensors = <&tmu 6>;
+
+ trips {
+ core_cluster3_alert: core-cluster3-alert {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ core-cluster3-crit {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&core_cluster3_alert>;
+ cooling-device =
<&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+
+ core-cluster4 {
+ polling-delay-passive = <1000>;
+ polling-delay = <5000>;
+ thermal-sensors = <&tmu 7>;
+
+ trips {
+ core_cluster4_alert: core-cluster4-alert {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ core-cluster4-crit {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&core_cluster4_alert>;
+ cooling-device =
<&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
--
2.17.1
next prev parent reply other threads:[~2020-07-15 6:55 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-07-15 6:49 [PATCH 1/2 v2] arm64: dts: ls1088a: add more thermal zone support andy.tang
2020-07-15 6:49 ` andy.tang [this message]
2020-08-21 6:09 ` [PATCH 2/2 v2] arm64: dts: ls208xa: " Amit Kucheria
2020-08-17 8:02 ` [PATCH 1/2 v2] arm64: dts: ls1088a: " Shawn Guo
2020-08-21 6:09 ` Amit Kucheria
2020-08-22 3:29 ` Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200715064909.9161-2-andy.tang@nxp.com \
--to=andy.tang@nxp.com \
--cc=amit.kucheria@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=leoyang.li@nxp.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox