From: Michal Hocko <mhocko@kernel.org>
To: Alan Stern <stern@rowland.harvard.edu>
Cc: LKML <linux-kernel@vger.kernel.org>,
Greg KH <gregkh@linuxfoundation.org>,
linux-usb@vger.kernel.org,
"Rafael J. Wysocki" <rjw@rjwysocki.net>
Subject: Re: kworker/0:3+pm hogging CPU
Date: Mon, 20 Jul 2020 16:32:13 +0200 [thread overview]
Message-ID: <20200720143213.GJ4074@dhcp22.suse.cz> (raw)
In-Reply-To: <20200720135857.GB1228057@rowland.harvard.edu>
[-- Attachment #1: Type: text/plain, Size: 580 bytes --]
On Mon 20-07-20 09:58:57, Alan Stern wrote:
[...]
> Can you provide the contents of /sys/kernel/debug/usb/devices and also a
attached.
> usbmon trace showing a few rounds of this recurring activity?
This is not my area so I will need some help here. I assume I should
look for debug/usb/usbmon which contains quite some files for me
0s 0u 1s 1t 1u 2s 2t 2u
most of them provide data when cating them.
> section of the dmesg log with dynamic debugging enabled for the usbcore
> module, as well.
Could you give me more details steps please?
--
Michal Hocko
SUSE Labs
[-- Attachment #2: usb.devices --]
[-- Type: text/plain, Size: 3020 bytes --]
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh=12
B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=1d6b ProdID=0002 Rev= 5.08
S: Manufacturer=Linux 5.8.0-rc6-00001-g5714ee50bb43 xhci-hcd
S: Product=xHCI Host Controller
S: SerialNumber=0000:00:14.0
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl=256ms
T: Bus=01 Lev=01 Prnt=01 Port=06 Cnt=01 Dev#= 2 Spd=480 MxCh= 0
D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=0a5c ProdID=5800 Rev= 1.01
S: Manufacturer=Broadcom Corp
S: Product=5880
S: SerialNumber=0123456789ABCD
C:* #Ifs= 2 Cfg#= 0 Atr=e0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=fe(app. ) Sub=00 Prot=00 Driver=(none)
E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=85(I) Atr=03(Int.) MxPS= 16 Ivl=125us
I:* If#= 1 Alt= 0 #EPs= 3 Cls=0b(scard) Sub=00 Prot=00 Driver=usbfs
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=86(I) Atr=03(Int.) MxPS= 16 Ivl=125us
T: Bus=01 Lev=01 Prnt=01 Port=07 Cnt=02 Dev#= 3 Spd=12 MxCh= 0
D: Ver= 2.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=8087 ProdID=0a2b Rev= 0.01
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none)
E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=1ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none)
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none)
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none)
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none)
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none)
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none)
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=5000 MxCh= 6
B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 3.00 Cls=09(hub ) Sub=00 Prot=03 MxPS= 9 #Cfgs= 1
P: Vendor=1d6b ProdID=0003 Rev= 5.08
S: Manufacturer=Linux 5.8.0-rc6-00001-g5714ee50bb43 xhci-hcd
S: Product=xHCI Host Controller
S: SerialNumber=0000:00:14.0
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl=256ms
next prev parent reply other threads:[~2020-07-20 14:32 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-07-20 8:39 kworker/0:3+pm hogging CPU Michal Hocko
2020-07-20 13:58 ` Alan Stern
2020-07-20 14:32 ` Michal Hocko [this message]
2020-07-20 15:12 ` Alan Stern
2020-07-20 16:33 ` Michal Hocko
2020-07-20 17:38 ` Alan Stern
2020-07-20 17:45 ` Michal Hocko
2020-07-20 17:48 ` Alan Stern
2020-07-20 18:16 ` Michal Hocko
2020-07-20 20:02 ` Alan Stern
2020-07-21 5:59 ` Michal Hocko
2020-07-21 14:33 ` Alan Stern
2020-07-21 16:00 ` Michal Hocko
2020-07-21 16:14 ` Alan Stern
2020-08-29 9:50 ` Salvatore Bonaccorso
2020-08-29 15:59 ` Alan Stern
2020-08-31 11:37 ` Mathias Nyman
2020-09-01 15:27 ` Michal Hocko
2020-09-04 15:57 ` Dirk Kostrewa
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200720143213.GJ4074@dhcp22.suse.cz \
--to=mhocko@kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=rjw@rjwysocki.net \
--cc=stern@rowland.harvard.edu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox