From: Nathan Chancellor <natechancellor@gmail.com>
To: Luca Stefani <luca.stefani.ge1@gmail.com>
Cc: akpm@linux-foundation.org,
freak07 <michalechner92@googlemail.com>,
Anton Altaparmakov <anton@tuxera.com>,
linux-ntfs-dev@lists.sourceforge.net,
linux-kernel@vger.kernel.org, clang-built-linux@googlegroups.com
Subject: Re: [PATCH v2] ntfs: Fix ntfs_test_inode and ntfs_init_locked_inode function type
Date: Mon, 20 Jul 2020 11:09:45 -0700 [thread overview]
Message-ID: <20200720180945.GA6045@ubuntu-n2-xlarge-x86> (raw)
In-Reply-To: <20200718112513.533800-1-luca.stefani.ge1@gmail.com>
On Sat, Jul 18, 2020 at 01:25:13PM +0200, Luca Stefani wrote:
> Clang's Control Flow Integrity (CFI) is a security mechanism that can
> help prevent JOP chains, deployed extensively in downstream kernels
> used in Android.
>
> It's deployment is hindered by mismatches in function signatures. For
> this case, we make callbacks match their intended function signature,
> and cast parameters within them rather than casting the callback when
> passed as a parameter.
>
> When running `mount -t ntfs ...` we observe the following trace:
>
> Call trace:
> __cfi_check_fail+0x1c/0x24
> name_to_dev_t+0x0/0x404
> iget5_locked+0x594/0x5e8
> ntfs_fill_super+0xbfc/0x43ec
> mount_bdev+0x30c/0x3cc
> ntfs_mount+0x18/0x24
> mount_fs+0x1b0/0x380
> vfs_kern_mount+0x90/0x398
> do_mount+0x5d8/0x1a10
> SyS_mount+0x108/0x144
> el0_svc_naked+0x34/0x38
>
> Signed-off-by: Luca Stefani <luca.stefani.ge1@gmail.com>
> Tested-by: freak07 <michalechner92@googlemail.com>
> Acked-by: Anton Altaparmakov <anton@tuxera.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
> ---
> fs/ntfs/dir.c | 2 +-
> fs/ntfs/inode.c | 27 ++++++++++++++-------------
> fs/ntfs/inode.h | 4 +---
> fs/ntfs/mft.c | 4 ++--
> 4 files changed, 18 insertions(+), 19 deletions(-)
>
> diff --git a/fs/ntfs/dir.c b/fs/ntfs/dir.c
> index 3c4811469ae8..e278bfc5ee7f 100644
> --- a/fs/ntfs/dir.c
> +++ b/fs/ntfs/dir.c
> @@ -1503,7 +1503,7 @@ static int ntfs_dir_fsync(struct file *filp, loff_t start, loff_t end,
> na.type = AT_BITMAP;
> na.name = I30;
> na.name_len = 4;
> - bmp_vi = ilookup5(vi->i_sb, vi->i_ino, (test_t)ntfs_test_inode, &na);
> + bmp_vi = ilookup5(vi->i_sb, vi->i_ino, ntfs_test_inode, &na);
> if (bmp_vi) {
> write_inode_now(bmp_vi, !datasync);
> iput(bmp_vi);
> diff --git a/fs/ntfs/inode.c b/fs/ntfs/inode.c
> index d4359a1df3d5..9bb9f0952b18 100644
> --- a/fs/ntfs/inode.c
> +++ b/fs/ntfs/inode.c
> @@ -30,10 +30,10 @@
> /**
> * ntfs_test_inode - compare two (possibly fake) inodes for equality
> * @vi: vfs inode which to test
> - * @na: ntfs attribute which is being tested with
> + * @data: data which is being tested with
> *
> * Compare the ntfs attribute embedded in the ntfs specific part of the vfs
> - * inode @vi for equality with the ntfs attribute @na.
> + * inode @vi for equality with the ntfs attribute @data.
> *
> * If searching for the normal file/directory inode, set @na->type to AT_UNUSED.
> * @na->name and @na->name_len are then ignored.
> @@ -43,8 +43,9 @@
> * NOTE: This function runs with the inode_hash_lock spin lock held so it is not
> * allowed to sleep.
> */
> -int ntfs_test_inode(struct inode *vi, ntfs_attr *na)
> +int ntfs_test_inode(struct inode *vi, void *data)
> {
> + ntfs_attr *na = (ntfs_attr *)data;
> ntfs_inode *ni;
>
> if (vi->i_ino != na->mft_no)
> @@ -72,9 +73,9 @@ int ntfs_test_inode(struct inode *vi, ntfs_attr *na)
> /**
> * ntfs_init_locked_inode - initialize an inode
> * @vi: vfs inode to initialize
> - * @na: ntfs attribute which to initialize @vi to
> + * @data: data which to initialize @vi to
> *
> - * Initialize the vfs inode @vi with the values from the ntfs attribute @na in
> + * Initialize the vfs inode @vi with the values from the ntfs attribute @data in
> * order to enable ntfs_test_inode() to do its work.
> *
> * If initializing the normal file/directory inode, set @na->type to AT_UNUSED.
> @@ -87,8 +88,9 @@ int ntfs_test_inode(struct inode *vi, ntfs_attr *na)
> * NOTE: This function runs with the inode->i_lock spin lock held so it is not
> * allowed to sleep. (Hence the GFP_ATOMIC allocation.)
> */
> -static int ntfs_init_locked_inode(struct inode *vi, ntfs_attr *na)
> +static int ntfs_init_locked_inode(struct inode *vi, void *data)
> {
> + ntfs_attr *na = (ntfs_attr *)data;
> ntfs_inode *ni = NTFS_I(vi);
>
> vi->i_ino = na->mft_no;
> @@ -131,7 +133,6 @@ static int ntfs_init_locked_inode(struct inode *vi, ntfs_attr *na)
> return 0;
> }
>
> -typedef int (*set_t)(struct inode *, void *);
> static int ntfs_read_locked_inode(struct inode *vi);
> static int ntfs_read_locked_attr_inode(struct inode *base_vi, struct inode *vi);
> static int ntfs_read_locked_index_inode(struct inode *base_vi,
> @@ -164,8 +165,8 @@ struct inode *ntfs_iget(struct super_block *sb, unsigned long mft_no)
> na.name = NULL;
> na.name_len = 0;
>
> - vi = iget5_locked(sb, mft_no, (test_t)ntfs_test_inode,
> - (set_t)ntfs_init_locked_inode, &na);
> + vi = iget5_locked(sb, mft_no, ntfs_test_inode,
> + ntfs_init_locked_inode, &na);
> if (unlikely(!vi))
> return ERR_PTR(-ENOMEM);
>
> @@ -225,8 +226,8 @@ struct inode *ntfs_attr_iget(struct inode *base_vi, ATTR_TYPE type,
> na.name = name;
> na.name_len = name_len;
>
> - vi = iget5_locked(base_vi->i_sb, na.mft_no, (test_t)ntfs_test_inode,
> - (set_t)ntfs_init_locked_inode, &na);
> + vi = iget5_locked(base_vi->i_sb, na.mft_no, ntfs_test_inode,
> + ntfs_init_locked_inode, &na);
> if (unlikely(!vi))
> return ERR_PTR(-ENOMEM);
>
> @@ -280,8 +281,8 @@ struct inode *ntfs_index_iget(struct inode *base_vi, ntfschar *name,
> na.name = name;
> na.name_len = name_len;
>
> - vi = iget5_locked(base_vi->i_sb, na.mft_no, (test_t)ntfs_test_inode,
> - (set_t)ntfs_init_locked_inode, &na);
> + vi = iget5_locked(base_vi->i_sb, na.mft_no, ntfs_test_inode,
> + ntfs_init_locked_inode, &na);
> if (unlikely(!vi))
> return ERR_PTR(-ENOMEM);
>
> diff --git a/fs/ntfs/inode.h b/fs/ntfs/inode.h
> index 98e670fbdd31..363e4e820673 100644
> --- a/fs/ntfs/inode.h
> +++ b/fs/ntfs/inode.h
> @@ -253,9 +253,7 @@ typedef struct {
> ATTR_TYPE type;
> } ntfs_attr;
>
> -typedef int (*test_t)(struct inode *, void *);
> -
> -extern int ntfs_test_inode(struct inode *vi, ntfs_attr *na);
> +extern int ntfs_test_inode(struct inode *vi, void *data);
>
> extern struct inode *ntfs_iget(struct super_block *sb, unsigned long mft_no);
> extern struct inode *ntfs_attr_iget(struct inode *base_vi, ATTR_TYPE type,
> diff --git a/fs/ntfs/mft.c b/fs/ntfs/mft.c
> index fbb9f1bc623d..0d62cd5bb7f8 100644
> --- a/fs/ntfs/mft.c
> +++ b/fs/ntfs/mft.c
> @@ -958,7 +958,7 @@ bool ntfs_may_write_mft_record(ntfs_volume *vol, const unsigned long mft_no,
> * dirty code path of the inode dirty code path when writing
> * $MFT occurs.
> */
> - vi = ilookup5_nowait(sb, mft_no, (test_t)ntfs_test_inode, &na);
> + vi = ilookup5_nowait(sb, mft_no, ntfs_test_inode, &na);
> }
> if (vi) {
> ntfs_debug("Base inode 0x%lx is in icache.", mft_no);
> @@ -1019,7 +1019,7 @@ bool ntfs_may_write_mft_record(ntfs_volume *vol, const unsigned long mft_no,
> vi = igrab(mft_vi);
> BUG_ON(vi != mft_vi);
> } else
> - vi = ilookup5_nowait(sb, na.mft_no, (test_t)ntfs_test_inode,
> + vi = ilookup5_nowait(sb, na.mft_no, ntfs_test_inode,
> &na);
> if (!vi) {
> /*
> --
> 2.27.0
>
next prev parent reply other threads:[~2020-07-20 18:09 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-06-27 19:02 [PATCH] ntfs: Fix ntfs_test_inode and ntfs_init_locked_inode function type Luca Stefani
2020-06-28 3:00 ` Nathan Chancellor
2020-06-29 21:46 ` Nick Desaulniers
2020-07-08 9:28 ` Anton Altaparmakov
2020-07-18 11:25 ` [PATCH v2] " Luca Stefani
2020-07-18 11:55 ` Anton Altaparmakov
2020-07-20 16:12 ` Nick Desaulniers
2020-07-20 18:09 ` Nathan Chancellor [this message]
2021-12-09 14:38 ` Mark-PK Tsai
2021-12-09 15:35 ` Greg KH
[not found] <20200414145903.GA11720@infradead.org>
2020-04-14 15:05 ` Luca Stefani
2020-04-14 15:12 ` Luca Stefani
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200720180945.GA6045@ubuntu-n2-xlarge-x86 \
--to=natechancellor@gmail.com \
--cc=akpm@linux-foundation.org \
--cc=anton@tuxera.com \
--cc=clang-built-linux@googlegroups.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-ntfs-dev@lists.sourceforge.net \
--cc=luca.stefani.ge1@gmail.com \
--cc=michalechner92@googlemail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox