Re: [PATCH v2] iio: frequency: ad9523: convert rest of driver to device managed functions

[Jonathan Cameron <jic23@kernel.org>]

On Wed, 22 Jul 2020 10:22:01 +0300
Alexandru Ardelean <alexandru.ardelean@analog.com> wrote:

> The driver pretty much uses device managed functions. The only left-over is
> the iio_device_register() function, which also requires an action-or-reset
> hook to disable the regulator on the remove and error path.
> 
> Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Applied.

Thanks,

Jonathan

> ---
> 
> Changelog v1 -> v2:
> * removed 'probed' message at the end of probe; mostly log spam
> 
>  drivers/iio/frequency/ad9523.c | 60 ++++++++++++----------------------
>  1 file changed, 20 insertions(+), 40 deletions(-)
> 
> diff --git a/drivers/iio/frequency/ad9523.c b/drivers/iio/frequency/ad9523.c
> index 334e1d779d6d..bdb0bc3b12dd 100644
> --- a/drivers/iio/frequency/ad9523.c
> +++ b/drivers/iio/frequency/ad9523.c
> @@ -969,6 +969,13 @@ static int ad9523_setup(struct iio_dev *indio_dev)
>  	return 0;
>  }
>  
> +static void ad9523_reg_disable(void *data)
> +{
> +	struct regulator *reg = data;
> +
> +	regulator_disable(reg);
> +}
> +
>  static int ad9523_probe(struct spi_device *spi)
>  {
>  	struct ad9523_platform_data *pdata = spi->dev.platform_data;
> @@ -994,21 +1001,22 @@ static int ad9523_probe(struct spi_device *spi)
>  		ret = regulator_enable(st->reg);
>  		if (ret)
>  			return ret;
> +
> +		ret = devm_add_action_or_reset(&spi->dev, ad9523_reg_disable,
> +					       st->reg);
> +		if (ret)
> +			return ret;
>  	}
>  
>  	st->pwrdown_gpio = devm_gpiod_get_optional(&spi->dev, "powerdown",
>  		GPIOD_OUT_HIGH);
> -	if (IS_ERR(st->pwrdown_gpio)) {
> -		ret = PTR_ERR(st->pwrdown_gpio);
> -		goto error_disable_reg;
> -	}
> +	if (IS_ERR(st->pwrdown_gpio))
> +		return PTR_ERR(st->pwrdown_gpio);
>  
>  	st->reset_gpio = devm_gpiod_get_optional(&spi->dev, "reset",
>  		GPIOD_OUT_LOW);
> -	if (IS_ERR(st->reset_gpio)) {
> -		ret = PTR_ERR(st->reset_gpio);
> -		goto error_disable_reg;
> -	}
> +	if (IS_ERR(st->reset_gpio))
> +		return PTR_ERR(st->reset_gpio);
>  
>  	if (st->reset_gpio) {
>  		udelay(1);
> @@ -1017,10 +1025,8 @@ static int ad9523_probe(struct spi_device *spi)
>  
>  	st->sync_gpio = devm_gpiod_get_optional(&spi->dev, "sync",
>  		GPIOD_OUT_HIGH);
> -	if (IS_ERR(st->sync_gpio)) {
> -		ret = PTR_ERR(st->sync_gpio);
> -		goto error_disable_reg;
> -	}
> +	if (IS_ERR(st->sync_gpio))
> +		return PTR_ERR(st->sync_gpio);
>  
>  	spi_set_drvdata(spi, indio_dev);
>  	st->spi = spi;
> @@ -1035,34 +1041,9 @@ static int ad9523_probe(struct spi_device *spi)
>  
>  	ret = ad9523_setup(indio_dev);
>  	if (ret < 0)
> -		goto error_disable_reg;
> -
> -	ret = iio_device_register(indio_dev);
> -	if (ret)
> -		goto error_disable_reg;
> -
> -	dev_info(&spi->dev, "probed %s\n", indio_dev->name);
> -
> -	return 0;
> -
> -error_disable_reg:
> -	if (!IS_ERR(st->reg))
> -		regulator_disable(st->reg);
> -
> -	return ret;
> -}
> -
> -static int ad9523_remove(struct spi_device *spi)
> -{
> -	struct iio_dev *indio_dev = spi_get_drvdata(spi);
> -	struct ad9523_state *st = iio_priv(indio_dev);
> -
> -	iio_device_unregister(indio_dev);
> -
> -	if (!IS_ERR(st->reg))
> -		regulator_disable(st->reg);
> +		return ret;
>  
> -	return 0;
> +	return devm_iio_device_register(&spi->dev, indio_dev);
>  }
>  
>  static const struct spi_device_id ad9523_id[] = {
> @@ -1076,7 +1057,6 @@ static struct spi_driver ad9523_driver = {
>  		.name	= "ad9523",
>  	},
>  	.probe		= ad9523_probe,
> -	.remove		= ad9523_remove,
>  	.id_table	= ad9523_id,
>  };
>  module_spi_driver(ad9523_driver);