Re: [PATCH v4 4/5] ARM: dts: imx6ull: add rng

Frieder Schrempf
2021-08-17T17:38:52Z

On 17.08.21 17:39, Frieder Schrempf wrote:
> Hi,
>
> On 15.07.20 17:26, Horia Geantă wrote:
>> Add node for the RNGB block.
>>
>> Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
>> Reviewed-by: Marco Felsch <m.felsch@pengutronix.de>
>> ---
>> arch/arm/boot/dts/imx6ull.dtsi | 7 +++++++
>> 1 file changed, 7 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/imx6ull.dtsi b/arch/arm/boot/dts/imx6ull.dtsi
>> index fcde7f77ae42..9bf67490ac49 100644
>> --- a/arch/arm/boot/dts/imx6ull.dtsi
>> +++ b/arch/arm/boot/dts/imx6ull.dtsi
>> @@ -68,6 +68,13 @@
>> clock-names = "dcp";
>> };
>>
>> + rngb: rng@2284000 {
>> + compatible = "fsl,imx6ull-rngb", "fsl,imx25-rngb";
>> + reg = <0x02284000 0x4000>;
>> + interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
>> + clocks = <&clks IMX6UL_CLK_DUMMY>;
>> + };
>> +
>
> My board (imx6ull-kontron-n6411-s.dts) fails to boot since this was added in v5.10-rc1. There is a crash in the RNG probe. Can anyone help?
> Below is the interesting part of the boot log from v5.14-rc6.

I just found out, that I was trying to boot on an i.MX6UL when I was assuming the board had an i.MX6ULL. That won't work of course. Sorry for the noise!