From: Joel Fernandes <joel@joelfernandes.org>
To: Peter Zijlstra <peterz@infradead.org>
Cc: linux-kernel@vger.kernel.org, mingo@kernel.org, will@kernel.org,
npiggin@gmail.com, elver@google.com, jgross@suse.com,
paulmck@kernel.org, rostedt@goodmis.org, rjw@rjwysocki.net,
svens@linux.ibm.com, tglx@linutronix.de
Subject: Re: [PATCH v2 03/11] sched,idle,rcu: Push rcu_idle deeper into the idle path
Date: Wed, 26 Aug 2020 21:18:26 -0400 [thread overview]
Message-ID: <20200827011826.GA1942571@google.com> (raw)
In-Reply-To: <20200821085348.310943801@infradead.org>
On Fri, Aug 21, 2020 at 10:47:41AM +0200, Peter Zijlstra wrote:
> Lots of things take locks, due to a wee bug, rcu_lockdep didn't notice
> that the locking tracepoints were using RCU.
>
> Push rcu_idle_{enter,exit}() as deep as possible into the idle paths,
> this also resolves a lot of _rcuidle()/RCU_NONIDLE() usage.
>
> Specifically, sched_clock_idle_wakeup_event() will use ktime which
> will use seqlocks which will tickle lockdep, and
> stop_critical_timings() uses lock.
I was wondering if those tracepoints should just use _rcuidle variant of the
trace call. But that's a terrible idea considering that would add unwanted
overhead I think.
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
thanks,
- Joel
>
> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
> Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
> Tested-by: Marco Elver <elver@google.com>
> ---
> drivers/cpuidle/cpuidle.c | 12 ++++++++----
> kernel/sched/idle.c | 22 ++++++++--------------
> 2 files changed, 16 insertions(+), 18 deletions(-)
>
> --- a/drivers/cpuidle/cpuidle.c
> +++ b/drivers/cpuidle/cpuidle.c
> @@ -145,13 +145,14 @@ static void enter_s2idle_proper(struct c
> * executing it contains RCU usage regarded as invalid in the idle
> * context, so tell RCU about that.
> */
> - RCU_NONIDLE(tick_freeze());
> + tick_freeze();
> /*
> * The state used here cannot be a "coupled" one, because the "coupled"
> * cpuidle mechanism enables interrupts and doing that with timekeeping
> * suspended is generally unsafe.
> */
> stop_critical_timings();
> + rcu_idle_enter();
> drv->states[index].enter_s2idle(dev, drv, index);
> if (WARN_ON_ONCE(!irqs_disabled()))
> local_irq_disable();
> @@ -160,7 +161,8 @@ static void enter_s2idle_proper(struct c
> * first CPU executing it calls functions containing RCU read-side
> * critical sections, so tell RCU about that.
> */
> - RCU_NONIDLE(tick_unfreeze());
> + rcu_idle_exit();
> + tick_unfreeze();
> start_critical_timings();
>
> time_end = ns_to_ktime(local_clock());
> @@ -229,16 +231,18 @@ int cpuidle_enter_state(struct cpuidle_d
> /* Take note of the planned idle state. */
> sched_idle_set_state(target_state);
>
> - trace_cpu_idle_rcuidle(index, dev->cpu);
> + trace_cpu_idle(index, dev->cpu);
> time_start = ns_to_ktime(local_clock());
>
> stop_critical_timings();
> + rcu_idle_enter();
> entered_state = target_state->enter(dev, drv, index);
> + rcu_idle_exit();
> start_critical_timings();
>
> sched_clock_idle_wakeup_event();
> time_end = ns_to_ktime(local_clock());
> - trace_cpu_idle_rcuidle(PWR_EVENT_EXIT, dev->cpu);
> + trace_cpu_idle(PWR_EVENT_EXIT, dev->cpu);
>
> /* The cpu is no longer idle or about to enter idle. */
> sched_idle_set_state(NULL);
> --- a/kernel/sched/idle.c
> +++ b/kernel/sched/idle.c
> @@ -54,17 +54,18 @@ __setup("hlt", cpu_idle_nopoll_setup);
>
> static noinline int __cpuidle cpu_idle_poll(void)
> {
> + trace_cpu_idle(0, smp_processor_id());
> + stop_critical_timings();
> rcu_idle_enter();
> - trace_cpu_idle_rcuidle(0, smp_processor_id());
> local_irq_enable();
> - stop_critical_timings();
>
> while (!tif_need_resched() &&
> - (cpu_idle_force_poll || tick_check_broadcast_expired()))
> + (cpu_idle_force_poll || tick_check_broadcast_expired()))
> cpu_relax();
> - start_critical_timings();
> - trace_cpu_idle_rcuidle(PWR_EVENT_EXIT, smp_processor_id());
> +
> rcu_idle_exit();
> + start_critical_timings();
> + trace_cpu_idle(PWR_EVENT_EXIT, smp_processor_id());
>
> return 1;
> }
> @@ -91,7 +92,9 @@ void __cpuidle default_idle_call(void)
> local_irq_enable();
> } else {
> stop_critical_timings();
> + rcu_idle_enter();
> arch_cpu_idle();
> + rcu_idle_exit();
> start_critical_timings();
> }
> }
> @@ -158,7 +161,6 @@ static void cpuidle_idle_call(void)
>
> if (cpuidle_not_available(drv, dev)) {
> tick_nohz_idle_stop_tick();
> - rcu_idle_enter();
>
> default_idle_call();
> goto exit_idle;
> @@ -178,21 +180,17 @@ static void cpuidle_idle_call(void)
> u64 max_latency_ns;
>
> if (idle_should_enter_s2idle()) {
> - rcu_idle_enter();
>
> entered_state = call_cpuidle_s2idle(drv, dev);
> if (entered_state > 0)
> goto exit_idle;
>
> - rcu_idle_exit();
> -
> max_latency_ns = U64_MAX;
> } else {
> max_latency_ns = dev->forced_idle_latency_limit_ns;
> }
>
> tick_nohz_idle_stop_tick();
> - rcu_idle_enter();
>
> next_state = cpuidle_find_deepest_state(drv, dev, max_latency_ns);
> call_cpuidle(drv, dev, next_state);
> @@ -209,8 +207,6 @@ static void cpuidle_idle_call(void)
> else
> tick_nohz_idle_retain_tick();
>
> - rcu_idle_enter();
> -
> entered_state = call_cpuidle(drv, dev, next_state);
> /*
> * Give the governor an opportunity to reflect on the outcome
> @@ -226,8 +222,6 @@ static void cpuidle_idle_call(void)
> */
> if (WARN_ON_ONCE(irqs_disabled()))
> local_irq_enable();
> -
> - rcu_idle_exit();
> }
>
> /*
>
>
next prev parent reply other threads:[~2020-08-27 1:19 UTC|newest]
Thread overview: 53+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-08-21 8:47 [PATCH v2 00/11] TRACE_IRQFLAGS wreckage Peter Zijlstra
2020-08-21 8:47 ` [PATCH v2 01/11] lockdep: Use raw_cpu_*() for per-cpu variables Peter Zijlstra
2020-08-27 1:05 ` Joel Fernandes
2020-08-27 7:54 ` [tip: locking/core] " tip-bot2 for Peter Zijlstra
2020-08-21 8:47 ` [PATCH v2 02/11] cpuidle: Fixup IRQ state Peter Zijlstra
2020-08-21 17:36 ` Rafael J. Wysocki
2020-08-27 1:06 ` Joel Fernandes
2020-08-27 7:54 ` [tip: locking/core] " tip-bot2 for Peter Zijlstra
2020-08-21 8:47 ` [PATCH v2 03/11] sched,idle,rcu: Push rcu_idle deeper into the idle path Peter Zijlstra
2020-08-27 1:18 ` Joel Fernandes [this message]
2020-08-27 1:24 ` Joel Fernandes
2020-08-27 7:47 ` peterz
2020-08-27 7:53 ` Thomas Gleixner
2020-08-27 22:30 ` Joel Fernandes
2020-09-02 7:08 ` peterz
2020-08-27 7:54 ` [tip: locking/core] " tip-bot2 for Peter Zijlstra
2020-08-21 8:47 ` [PATCH v2 04/11] cpuidle: Make CPUIDLE_FLAG_TLB_FLUSHED generic Peter Zijlstra
2020-08-27 7:54 ` [tip: locking/core] " tip-bot2 for Peter Zijlstra
2020-08-21 8:47 ` [PATCH v2 05/11] cpuidle: Move trace_cpu_idle() into generic code Peter Zijlstra
2020-08-27 7:54 ` [tip: locking/core] " tip-bot2 for Peter Zijlstra
2020-08-21 8:47 ` [PATCH v2 06/11] x86/entry: Remove unused THUNKs Peter Zijlstra
2020-08-27 7:54 ` [tip: locking/core] " tip-bot2 for Peter Zijlstra
2020-08-21 8:47 ` [PATCH v2 07/11] locking/lockdep: Cleanup Peter Zijlstra
2020-08-27 7:54 ` [tip: locking/core] " tip-bot2 for Peter Zijlstra
2020-08-21 8:47 ` [PATCH v2 08/11] nds32: Implement arch_irqs_disabled() Peter Zijlstra
2020-08-27 7:54 ` [tip: locking/core] " tip-bot2 for Peter Zijlstra
2020-08-21 8:47 ` [PATCH v2 09/11] arm64: " Peter Zijlstra
2020-08-27 7:54 ` [tip: locking/core] " tip-bot2 for Peter Zijlstra
2020-08-21 8:47 ` [PATCH v2 10/11] lockdep: Only trace IRQ edges Peter Zijlstra
2020-08-26 0:47 ` Thomas Gleixner
2020-09-02 4:21 ` Guenter Roeck
2020-09-02 9:09 ` peterz
2020-09-02 9:12 ` peterz
2020-09-02 13:48 ` Guenter Roeck
2020-09-08 14:22 ` peterz
2020-09-08 14:40 ` Guenter Roeck
2020-09-08 15:41 ` [PATCH] sparc64: Fix irqtrace warnings on Ultra-S peterz
2020-08-21 8:47 ` [PATCH v2 11/11] lockdep,trace: Expose tracepoints Peter Zijlstra
2020-08-27 7:54 ` [tip: locking/core] " tip-bot2 for Peter Zijlstra
2020-09-02 3:51 ` [PATCH v2 11/11] " Guenter Roeck
2020-09-02 7:24 ` peterz
2020-09-02 13:21 ` Guenter Roeck
2020-09-02 8:56 ` peterz
2020-09-02 13:57 ` Guenter Roeck
2020-09-03 14:00 ` peterz
2020-09-03 14:13 ` peterz
2020-09-03 15:19 ` Guenter Roeck
2020-09-03 15:36 ` peterz
2020-09-03 15:54 ` Paul E. McKenney
2020-09-03 18:11 ` Guenter Roeck
2020-08-21 12:58 ` [PATCH v2 00/11] TRACE_IRQFLAGS wreckage peterz
2020-08-26 10:16 ` [PATCH v2 12/11] mips: Implement arch_irqs_disabled() peterz
2020-08-27 7:54 ` [tip: locking/core] " tip-bot2 for Peter Zijlstra
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200827011826.GA1942571@google.com \
--to=joel@joelfernandes.org \
--cc=elver@google.com \
--cc=jgross@suse.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@kernel.org \
--cc=npiggin@gmail.com \
--cc=paulmck@kernel.org \
--cc=peterz@infradead.org \
--cc=rjw@rjwysocki.net \
--cc=rostedt@goodmis.org \
--cc=svens@linux.ibm.com \
--cc=tglx@linutronix.de \
--cc=will@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox