From: Guenter Roeck <linux@roeck-us.net>
To: Tim Harvey <tharvey@gateworks.com>
Cc: Jean Delvare <jdelvare@suse.com>,
Robert Jones <rjones@gateworks.com>,
linux-hwmon@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2] hwmon: gsc-hwmon: add fan sensor
Date: Sun, 30 Aug 2020 08:11:00 -0700 [thread overview]
Message-ID: <20200830151100.GA168034@roeck-us.net> (raw)
On Thu, Aug 27, 2020 at 01:04:54PM -0700, Tim Harvey wrote:
> Add a fan sensor to report RPM's from a fan tach input.
>
> Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Applied.
Thanks,
Guenter
> --
Note there is a '-' missing here, causing the version history to be added
to the commit log. I dropped that.
> v2:
> - avoid unnecessary line split and fix opening brace location
> ---
> drivers/hwmon/gsc-hwmon.c | 32 +++++++++++++++++++++++++++++---
> include/linux/platform_data/gsc_hwmon.h | 1 +
> 2 files changed, 30 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/hwmon/gsc-hwmon.c b/drivers/hwmon/gsc-hwmon.c
> index c6d4567..1fe3741 100644
> --- a/drivers/hwmon/gsc-hwmon.c
> +++ b/drivers/hwmon/gsc-hwmon.c
> @@ -17,6 +17,7 @@
>
> #define GSC_HWMON_MAX_TEMP_CH 16
> #define GSC_HWMON_MAX_IN_CH 16
> +#define GSC_HWMON_MAX_FAN_CH 16
>
> #define GSC_HWMON_RESOLUTION 12
> #define GSC_HWMON_VREF 2500
> @@ -27,11 +28,14 @@ struct gsc_hwmon_data {
> struct regmap *regmap;
> const struct gsc_hwmon_channel *temp_ch[GSC_HWMON_MAX_TEMP_CH];
> const struct gsc_hwmon_channel *in_ch[GSC_HWMON_MAX_IN_CH];
> + const struct gsc_hwmon_channel *fan_ch[GSC_HWMON_MAX_FAN_CH];
> u32 temp_config[GSC_HWMON_MAX_TEMP_CH + 1];
> u32 in_config[GSC_HWMON_MAX_IN_CH + 1];
> + u32 fan_config[GSC_HWMON_MAX_FAN_CH + 1];
> struct hwmon_channel_info temp_info;
> struct hwmon_channel_info in_info;
> - const struct hwmon_channel_info *info[3];
> + struct hwmon_channel_info fan_info;
> + const struct hwmon_channel_info *info[4];
> struct hwmon_chip_info chip;
> };
>
> @@ -155,6 +159,9 @@ gsc_hwmon_read(struct device *dev, enum hwmon_sensor_types type, u32 attr,
> case hwmon_temp:
> ch = hwmon->temp_ch[channel];
> break;
> + case hwmon_fan:
> + ch = hwmon->fan_ch[channel];
> + break;
> default:
> return -EOPNOTSUPP;
> }
> @@ -187,6 +194,9 @@ gsc_hwmon_read(struct device *dev, enum hwmon_sensor_types type, u32 attr,
> /* adjust by uV offset */
> tmp += ch->mvoffset;
> break;
> + case mode_fan:
> + tmp *= 30; /* convert to revolutions per minute */
> + break;
> case mode_voltage_24bit:
> case mode_voltage_16bit:
> /* no adjustment needed */
> @@ -211,6 +221,9 @@ gsc_hwmon_read_string(struct device *dev, enum hwmon_sensor_types type,
> case hwmon_temp:
> *buf = hwmon->temp_ch[channel]->name;
> break;
> + case hwmon_fan:
> + *buf = hwmon->fan_ch[channel]->name;
> + break;
> default:
> return -ENOTSUPP;
> }
> @@ -304,7 +317,7 @@ static int gsc_hwmon_probe(struct platform_device *pdev)
> struct gsc_hwmon_platform_data *pdata = dev_get_platdata(dev);
> struct gsc_hwmon_data *hwmon;
> const struct attribute_group **groups;
> - int i, i_in, i_temp;
> + int i, i_in, i_temp, i_fan;
>
> if (!pdata) {
> pdata = gsc_hwmon_get_devtree_pdata(dev);
> @@ -324,7 +337,7 @@ static int gsc_hwmon_probe(struct platform_device *pdev)
> if (IS_ERR(hwmon->regmap))
> return PTR_ERR(hwmon->regmap);
>
> - for (i = 0, i_in = 0, i_temp = 0; i < hwmon->pdata->nchannels; i++) {
> + for (i = 0, i_in = 0, i_temp = 0, i_fan = 0; i < hwmon->pdata->nchannels; i++) {
> const struct gsc_hwmon_channel *ch = &pdata->channels[i];
>
> switch (ch->mode) {
> @@ -338,6 +351,16 @@ static int gsc_hwmon_probe(struct platform_device *pdev)
> HWMON_T_LABEL;
> i_temp++;
> break;
> + case mode_fan:
> + if (i_fan == GSC_HWMON_MAX_FAN_CH) {
> + dev_err(gsc->dev, "too many fan channels\n");
> + return -EINVAL;
> + }
> + hwmon->fan_ch[i_fan] = ch;
> + hwmon->fan_config[i_fan] = HWMON_F_INPUT |
> + HWMON_F_LABEL;
> + i_fan++;
> + break;
> case mode_voltage_24bit:
> case mode_voltage_16bit:
> case mode_voltage_raw:
> @@ -361,10 +384,13 @@ static int gsc_hwmon_probe(struct platform_device *pdev)
> hwmon->chip.info = hwmon->info;
> hwmon->info[0] = &hwmon->temp_info;
> hwmon->info[1] = &hwmon->in_info;
> + hwmon->info[2] = &hwmon->fan_info;
> hwmon->temp_info.type = hwmon_temp;
> hwmon->temp_info.config = hwmon->temp_config;
> hwmon->in_info.type = hwmon_in;
> hwmon->in_info.config = hwmon->in_config;
> + hwmon->fan_info.type = hwmon_fan;
> + hwmon->fan_info.config = hwmon->fan_config;
>
> groups = pdata->fan_base ? gsc_hwmon_groups : NULL;
> hwmon_dev = devm_hwmon_device_register_with_info(dev,
> diff --git a/include/linux/platform_data/gsc_hwmon.h b/include/linux/platform_data/gsc_hwmon.h
> index 37a8f554d..281f499 100644
> --- a/include/linux/platform_data/gsc_hwmon.h
> +++ b/include/linux/platform_data/gsc_hwmon.h
> @@ -7,6 +7,7 @@ enum gsc_hwmon_mode {
> mode_voltage_24bit,
> mode_voltage_raw,
> mode_voltage_16bit,
> + mode_fan,
> mode_max,
> };
>
> --
> 2.7.4
>
next reply other threads:[~2020-08-30 15:11 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-08-30 15:11 Guenter Roeck [this message]
-- strict thread matches above, loose matches on Subject: below --
2020-08-27 20:04 [PATCH v2] hwmon: gsc-hwmon: add fan sensor Tim Harvey
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200830151100.GA168034@roeck-us.net \
--to=linux@roeck-us.net \
--cc=jdelvare@suse.com \
--cc=linux-hwmon@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=rjones@gateworks.com \
--cc=tharvey@gateworks.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox