From: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
To: Kai Heng Feng <kai.heng.feng@canonical.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>,
Joonas Lahtinen <joonas.lahtinen@linux.intel.com>,
Rodrigo Vivi <rodrigo.vivi@intel.com>,
David Airlie <airlied@linux.ie>, Daniel Vetter <daniel@ffwll.ch>,
Uma Shankar <uma.shankar@intel.com>,
Lucas De Marchi <lucas.demarchi@intel.com>,
Maarten Lankhorst <maarten.lankhorst@linux.intel.com>,
Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>,
intel-gfx@lists.freedesktop.org,
"open list:DRM DRIVERS" <dri-devel@lists.freedesktop.org>,
open list <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH] drm/i915/lspcon: Limits to 8 bpc for RGB/YCbCr444
Date: Mon, 31 Aug 2020 22:48:20 +0300 [thread overview]
Message-ID: <20200831194820.GB6112@intel.com> (raw)
In-Reply-To: <6D40F1E0-AFF6-4D38-BB9B-C52B43F83266@canonical.com>
On Thu, Aug 27, 2020 at 01:04:54PM +0800, Kai Heng Feng wrote:
> Hi Ville,
>
> > On Aug 27, 2020, at 12:24 AM, Ville Syrjälä <ville.syrjala@linux.intel.com> wrote:
> >
> > On Wed, Aug 26, 2020 at 01:21:15PM +0800, Kai-Heng Feng wrote:
> >> LSPCON only supports 8 bpc for RGB/YCbCr444.
> >>
> >> Set the correct bpp otherwise it renders blank screen.
> >
> > Hmm. Does
> > git://github.com/vsyrjala/linux.git dp_downstream_ports_5
> > work?
> >
> > Actually better make that dp_downstream_ports_5^^^^^^^^^^^ aka.
> > 54d846ce62a2 ("drm/i915: Do YCbCr 444->420 conversion via DP protocol
> > converters") to avoid the experiments and hacks I have sitting on top.
>
> Can you please rebase it to mainline master or drm-tip?
git://github.com/vsyrjala/linux.git dp_downstream_ports_6
I threw out the hacks/experimental stuff.
>
> I am getting errors on the branch:
>
> DESCEND objtool
> CALL scripts/atomic/check-atomics.sh
> CALL scripts/checksyscalls.sh
> CHK include/generated/compile.h
> Building modules, stage 2.
> MODPOST 166 modules
> LD arch/x86/boot/compressed/vmlinux
> ld: arch/x86/boot/compressed/pgtable_64.o:(.bss+0x0): multiple definition of `__force_order'; arch/x86/boot/compressed/kaslr_64.o:(.bss+0x0): first defined here
> ld: arch/x86/boot/compressed/head_64.o: warning: relocation in read-only section `.head.text'
> ld: warning: creating DT_TEXTREL in a PIE
> make[2]: *** [arch/x86/boot/compressed/Makefile:119: arch/x86/boot/compressed/vmlinux] Error 1
> make[1]: *** [arch/x86/boot/Makefile:113: arch/x86/boot/compressed/vmlinux] Error 2
> make: *** [arch/x86/Makefile:284: bzImage] Error 2
> make: *** Waiting for unfinished jobs....
>
> Kai-Heng
>
> >
> >>
> >> Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2195
> >> Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
> >> ---
> >> drivers/gpu/drm/i915/display/intel_lspcon.c | 3 ++-
> >> 1 file changed, 2 insertions(+), 1 deletion(-)
> >>
> >> diff --git a/drivers/gpu/drm/i915/display/intel_lspcon.c b/drivers/gpu/drm/i915/display/intel_lspcon.c
> >> index b781bf469644..c7a44fcaade8 100644
> >> --- a/drivers/gpu/drm/i915/display/intel_lspcon.c
> >> +++ b/drivers/gpu/drm/i915/display/intel_lspcon.c
> >> @@ -196,7 +196,8 @@ void lspcon_ycbcr420_config(struct drm_connector *connector,
> >> crtc_state->port_clock /= 2;
> >> crtc_state->output_format = INTEL_OUTPUT_FORMAT_YCBCR444;
> >> crtc_state->lspcon_downsampling = true;
> >> - }
> >> + } else
> >> + crtc_state->pipe_bpp = 24;
> >> }
> >>
> >> static bool lspcon_probe(struct intel_lspcon *lspcon)
> >> --
> >> 2.17.1
> >
> > --
> > Ville Syrjälä
> > Intel
--
Ville Syrjälä
Intel
next prev parent reply other threads:[~2020-08-31 19:48 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-08-26 5:21 [PATCH] drm/i915/lspcon: Limits to 8 bpc for RGB/YCbCr444 Kai-Heng Feng
2020-08-26 16:24 ` Ville Syrjälä
2020-08-27 5:04 ` Kai Heng Feng
2020-08-31 19:48 ` Ville Syrjälä [this message]
2020-09-02 5:22 ` Kai-Heng Feng
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200831194820.GB6112@intel.com \
--to=ville.syrjala@linux.intel.com \
--cc=airlied@linux.ie \
--cc=daniel@ffwll.ch \
--cc=dri-devel@lists.freedesktop.org \
--cc=gwan-gyeong.mun@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=jani.nikula@linux.intel.com \
--cc=joonas.lahtinen@linux.intel.com \
--cc=kai.heng.feng@canonical.com \
--cc=linux-kernel@vger.kernel.org \
--cc=lucas.demarchi@intel.com \
--cc=maarten.lankhorst@linux.intel.com \
--cc=rodrigo.vivi@intel.com \
--cc=uma.shankar@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox