From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Francisco Jerez <currojerez@riseup.net>,
Caleb Callaway <caleb.callaway@intel.com>,
Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>,
"Rafael J . Wysocki" <rafael.j.wysocki@intel.com>,
Sasha Levin <sashal@kernel.org>,
linux-pm@vger.kernel.org
Subject: [PATCH AUTOSEL 4.19 21/26] cpufreq: intel_pstate: Fix intel_pstate_get_hwp_max() for turbo disabled
Date: Mon, 7 Sep 2020 12:34:21 -0400 [thread overview]
Message-ID: <20200907163426.1281284-21-sashal@kernel.org> (raw)
In-Reply-To: <20200907163426.1281284-1-sashal@kernel.org>
From: Francisco Jerez <currojerez@riseup.net>
[ Upstream commit eacc9c5a927e474c173a5d53dd7fb8e306511768 ]
This fixes the behavior of the scaling_max_freq and scaling_min_freq
sysfs files in systems which had turbo disabled by the BIOS.
Caleb noticed that the HWP is programmed to operate in the wrong
P-state range on his system when the CPUFREQ policy min/max frequency
is set via sysfs. This seems to be because in his system
intel_pstate_get_hwp_max() is returning the maximum turbo P-state even
though turbo was disabled by the BIOS, which causes intel_pstate to
scale kHz frequencies incorrectly e.g. setting the maximum turbo
frequency whenever the maximum guaranteed frequency is requested via
sysfs.
Tested-by: Caleb Callaway <caleb.callaway@intel.com>
Signed-off-by: Francisco Jerez <currojerez@riseup.net>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
[ rjw: Minor subject edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/cpufreq/intel_pstate.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/cpufreq/intel_pstate.c b/drivers/cpufreq/intel_pstate.c
index 8fa22aa2ac65b..864a7e8ebdfc3 100644
--- a/drivers/cpufreq/intel_pstate.c
+++ b/drivers/cpufreq/intel_pstate.c
@@ -712,7 +712,7 @@ static void intel_pstate_get_hwp_max(unsigned int cpu, int *phy_max,
rdmsrl_on_cpu(cpu, MSR_HWP_CAPABILITIES, &cap);
WRITE_ONCE(all_cpu_data[cpu]->hwp_cap_cached, cap);
- if (global.no_turbo)
+ if (global.no_turbo || global.turbo_disabled)
*current_max = HWP_GUARANTEED_PERF(cap);
else
*current_max = HWP_HIGHEST_PERF(cap);
--
2.25.1
next prev parent reply other threads:[~2020-09-07 16:50 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-09-07 16:34 [PATCH AUTOSEL 4.19 01/26] ARC: HSDK: wireup perf irq Sasha Levin
2020-09-07 16:34 ` [PATCH AUTOSEL 4.19 02/26] dmaengine: acpi: Put the CSRT table after using it Sasha Levin
2020-09-07 16:34 ` [PATCH AUTOSEL 4.19 03/26] netfilter: conntrack: allow sctp hearbeat after connection re-use Sasha Levin
2020-09-07 16:34 ` [PATCH AUTOSEL 4.19 04/26] drivers/net/wan/lapbether: Added needed_tailroom Sasha Levin
2020-09-07 16:34 ` [PATCH AUTOSEL 4.19 05/26] NFC: st95hf: Fix memleak in st95hf_in_send_cmd Sasha Levin
2020-09-07 16:34 ` [PATCH AUTOSEL 4.19 06/26] firestream: Fix memleak in fs_open Sasha Levin
2020-09-07 16:34 ` [PATCH AUTOSEL 4.19 07/26] ALSA: hda: Fix 2 channel swapping for Tegra Sasha Levin
2020-09-07 16:34 ` [PATCH AUTOSEL 4.19 08/26] drivers/net/wan/lapbether: Set network_header before transmitting Sasha Levin
2020-09-07 16:34 ` [PATCH AUTOSEL 4.19 09/26] cfg80211: regulatory: reject invalid hints Sasha Levin
2020-09-07 16:34 ` [PATCH AUTOSEL 4.19 10/26] net: usb: Fix uninit-was-stored issue in asix_read_phy_addr() Sasha Levin
2020-09-07 16:34 ` [PATCH AUTOSEL 4.19 11/26] xfs: initialize the shortform attr header padding entry Sasha Levin
2020-09-07 16:34 ` [PATCH AUTOSEL 4.19 12/26] irqchip/eznps: Fix build error for !ARC700 builds Sasha Levin
2020-09-07 16:34 ` [PATCH AUTOSEL 4.19 13/26] nvme-fabrics: don't check state NVME_CTRL_NEW for request acceptance Sasha Levin
2020-09-07 16:34 ` [PATCH AUTOSEL 4.19 14/26] nvme: have nvme_wait_freeze_timeout return if it timed out Sasha Levin
2020-09-07 16:34 ` [PATCH AUTOSEL 4.19 15/26] nvme-rdma: serialize controller teardown sequences Sasha Levin
2020-09-07 16:34 ` [PATCH AUTOSEL 4.19 16/26] HID: quirks: Set INCREMENT_USAGE_ON_DUPLICATE for all Saitek X52 devices Sasha Levin
2020-09-07 16:34 ` [PATCH AUTOSEL 4.19 17/26] drivers/net/wan/hdlc_cisco: Add hard_header_len Sasha Levin
2020-09-07 16:34 ` [PATCH AUTOSEL 4.19 18/26] HID: elan: Fix memleak in elan_input_configured Sasha Levin
2020-09-07 16:34 ` [PATCH AUTOSEL 4.19 19/26] ARC: [plat-hsdk]: Switch ethernet phy-mode to rgmii-id Sasha Levin
2020-09-07 16:34 ` [PATCH AUTOSEL 4.19 20/26] cpufreq: intel_pstate: Refuse to turn off with HWP enabled Sasha Levin
2020-09-07 16:34 ` Sasha Levin [this message]
2020-09-07 16:34 ` [PATCH AUTOSEL 4.19 22/26] net: usb: dm9601: Add USB ID of Keenetic Plus DSL Sasha Levin
2020-09-07 16:34 ` [PATCH AUTOSEL 4.19 23/26] ALSA: hda: fix a runtime pm issue in SOF when integrated GPU is disabled Sasha Levin
2020-09-07 16:34 ` [PATCH AUTOSEL 4.19 24/26] drm/amdgpu: Fix bug in reporting voltage for CIK Sasha Levin
2020-09-07 16:34 ` [PATCH AUTOSEL 4.19 25/26] iommu/amd: Do not use IOMMUv2 functionality when SME is active Sasha Levin
2020-09-07 16:34 ` [PATCH AUTOSEL 4.19 26/26] gcov: Disable gcov build with GCC 10 Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200907163426.1281284-21-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=caleb.callaway@intel.com \
--cc=currojerez@riseup.net \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=rafael.j.wysocki@intel.com \
--cc=srinivas.pandruvada@linux.intel.com \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox