From: Camel Guo <camel.guo@axis.com>
To: <lgirdwood@gmail.com>, <broonie@kernel.org>, <tiwai@suse.com>,
<dmurphy@ti.com>
Cc: <alsa-devel@alsa-project.org>, <linux-kernel@vger.kernel.org>,
<kernel@axis.com>, Camel Guo <camelg@axis.com>
Subject: [PATCH v4] ASoC: tlv320adcx140: Add support for configuring GPIO pin
Date: Fri, 18 Sep 2020 09:32:29 +0200 [thread overview]
Message-ID: <20200918073229.27348-1-camel.guo@axis.com> (raw)
From: Camel Guo <camelg@axis.com>
Add support to configure the GPIO pin to the specific configuration.
The GPIO pin can be configured as GPO, IRQ, SDOUT2, PDMCLK, MICBASE_EN,
GPI, MCLK, SDIN, PDMDIN1, PDMDIN2, PDMDIN3 or PDMDIN4 and the output
drive can be configured with various configuration.
Signed-off-by: Camel Guo <camelg@axis.com>
Acked-by: Dan Murphy <dmurphy@ti.com>
---
v4:
- Rebase and fix merge conflict
- Add Acked-by from Dan
v3:
- Add ADCX140_NUM_GPIO_CFGS avoiding using magic number
- Remove unneeded check on ret in adcx140_configure_gpio
sound/soc/codecs/tlv320adcx140.c | 40 ++++++++++++++++++++++++++++++++
sound/soc/codecs/tlv320adcx140.h | 5 ++++
2 files changed, 45 insertions(+)
diff --git a/sound/soc/codecs/tlv320adcx140.c b/sound/soc/codecs/tlv320adcx140.c
index 28dbd7d5e149..53a80246aee1 100644
--- a/sound/soc/codecs/tlv320adcx140.c
+++ b/sound/soc/codecs/tlv320adcx140.c
@@ -861,6 +861,42 @@ static int adcx140_configure_gpo(struct adcx140_priv *adcx140)
}
+static int adcx140_configure_gpio(struct adcx140_priv *adcx140)
+{
+ int gpio_count = 0;
+ u32 gpio_outputs[ADCX140_NUM_GPIO_CFGS];
+ u32 gpio_output_val = 0;
+ int ret;
+
+ gpio_count = device_property_count_u32(adcx140->dev,
+ "ti,gpio-config");
+ if (gpio_count == 0)
+ return 0;
+
+ if (gpio_count != ADCX140_NUM_GPIO_CFGS)
+ return -EINVAL;
+
+ ret = device_property_read_u32_array(adcx140->dev, "ti,gpio-config",
+ gpio_outputs, gpio_count);
+ if (ret)
+ return ret;
+
+ if (gpio_outputs[0] > ADCX140_GPIO_CFG_MAX) {
+ dev_err(adcx140->dev, "GPIO config out of range\n");
+ return -EINVAL;
+ }
+
+ if (gpio_outputs[1] > ADCX140_GPIO_DRV_MAX) {
+ dev_err(adcx140->dev, "GPIO drive out of range\n");
+ return -EINVAL;
+ }
+
+ gpio_output_val = gpio_outputs[0] << ADCX140_GPIO_SHIFT
+ | gpio_outputs[1];
+
+ return regmap_write(adcx140->regmap, ADCX140_GPIO_CFG0, gpio_output_val);
+}
+
static int adcx140_codec_probe(struct snd_soc_component *component)
{
struct adcx140_priv *adcx140 = snd_soc_component_get_drvdata(component);
@@ -958,6 +994,10 @@ static int adcx140_codec_probe(struct snd_soc_component *component)
return ret;
}
+ ret = adcx140_configure_gpio(adcx140);
+ if (ret)
+ return ret;
+
ret = adcx140_configure_gpo(adcx140);
if (ret)
goto out;
diff --git a/sound/soc/codecs/tlv320adcx140.h b/sound/soc/codecs/tlv320adcx140.h
index 107bd7927d9c..d7d4e3a88b5c 100644
--- a/sound/soc/codecs/tlv320adcx140.h
+++ b/sound/soc/codecs/tlv320adcx140.h
@@ -148,4 +148,9 @@
#define ADCX140_TX_FILL BIT(0)
+#define ADCX140_NUM_GPIO_CFGS 2
+#define ADCX140_GPIO_SHIFT 4
+#define ADCX140_GPIO_CFG_MAX 15
+#define ADCX140_GPIO_DRV_MAX 5
+
#endif /* _TLV320ADCX140_ */
--
2.20.1
next reply other threads:[~2020-09-18 7:39 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-09-18 7:32 Camel Guo [this message]
2020-09-18 11:18 ` [PATCH v4] ASoC: tlv320adcx140: Add support for configuring GPIO pin Mark Brown
2020-09-18 11:27 ` Camel Guo
2020-09-18 11:33 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200918073229.27348-1-camel.guo@axis.com \
--to=camel.guo@axis.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=camelg@axis.com \
--cc=dmurphy@ti.com \
--cc=kernel@axis.com \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=tiwai@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox