From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
stable@vger.kernel.org,
Tobias Diedrich <tobiasdiedrich@gmail.com>
Subject: [PATCH 4.19 45/49] serial: 8250_pci: Add Realtek 816a and 816b
Date: Mon, 21 Sep 2020 18:28:29 +0200 [thread overview]
Message-ID: <20200921162036.649907780@linuxfoundation.org> (raw)
In-Reply-To: <20200921162034.660953761@linuxfoundation.org>
From: Tobias Diedrich <tobiasdiedrich@gmail.com>
commit 3c5a87be170aba8ac40982182f812dcff6ed1ad1 upstream.
These serial ports are exposed by the OOB-management-engine on
RealManage-enabled network cards (e.g. AMD DASH enabled systems using
Realtek cards).
Because these have 3 BARs, they fail the "num_iomem <= 1" check in
serial_pci_guess_board.
I've manually checked the two IOMEM regions and BAR 2 doesn't seem to
respond to reads, but BAR 4 seems to be an MMIO version of the IO ports
(untested).
With this change, the ports are detected:
0000:02:00.1: ttyS0 at I/O 0x2200 (irq = 82, base_baud = 115200) is a 16550A
0000:02:00.2: ttyS1 at I/O 0x2100 (irq = 55, base_baud = 115200) is a 16550A
lspci output:
02:00.1 0700: 10ec:816a (rev 0e) (prog-if 02 [16550])
Subsystem: 17aa:5082
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort+ <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 82
IOMMU group: 11
Region 0: I/O ports at 2200 [size=256]
Region 2: Memory at fd715000 (64-bit, non-prefetchable) [size=4K]
Region 4: Memory at fd704000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [40] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [70] Express (v2) Endpoint, MSI 01
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 <64us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- SlotPowerLimit 0.000W
DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr+ NonFatalErr- FatalErr- UnsupReq+ AuxPwr+ TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s unlimited, L1 <64us
ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp+
LnkCtl: ASPM L1 Enabled; RCB 64 bytes, Disabled- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s (ok), Width x1 (ok)
TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Range ABCD, TimeoutDis+ NROPrPrP- LTR+
10BitTagComp- 10BitTagReq- OBFF Via message/WAKE#, ExtFmt- EETLPPrefix-
EmergencyPowerReduction Not Supported, EmergencyPowerReductionInit-
FRS- TPHComp- ExtTPHComp-
AtomicOpsCap: 32bit- 64bit- 128bitCAS-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LTR- OBFF Disabled,
AtomicOpsCtl: ReqEn-
LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete- EqualizationPhase1-
EqualizationPhase2- EqualizationPhase3- LinkEqualizationRequest-
Retimer- 2Retimers- CrosslinkRes: unsupported
Capabilities: [b0] MSI-X: Enable- Count=4 Masked-
Vector table: BAR=4 offset=00000000
PBA: BAR=4 offset=00000800
Capabilities: [d0] Vital Product Data
Not readable
Capabilities: [100 v2] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+
AERCap: First Error Pointer: 00, ECRCGenCap+ ECRCGenEn- ECRCChkCap+ ECRCChkEn-
MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap-
HeaderLog: 00000000 00000000 00000000 00000000
Capabilities: [160 v1] Device Serial Number 00-00-00-00-00-00-00-00
Capabilities: [170 v1] Latency Tolerance Reporting
Max snoop latency: 0ns
Max no snoop latency: 0ns
Capabilities: [178 v1] L1 PM Substates
L1SubCap: PCI-PM_L1.2+ PCI-PM_L1.1+ ASPM_L1.2+ ASPM_L1.1+ L1_PM_Substates+
PortCommonModeRestoreTime=150us PortTPowerOnTime=150us
L1SubCtl1: PCI-PM_L1.2- PCI-PM_L1.1- ASPM_L1.2- ASPM_L1.1-
T_CommonMode=0us LTR1.2_Threshold=0ns
L1SubCtl2: T_PwrOn=10us
02:00.2 0700: 10ec:816b (rev 0e)
[...same...]
Signed-off-by: Tobias Diedrich <tobiasdiedrich@gmail.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200914173628.GA22508@yamamaya.is-a-geek.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/tty/serial/8250/8250_pci.c | 11 +++++++++++
1 file changed, 11 insertions(+)
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -5236,6 +5236,17 @@ static const struct pci_device_id serial
PCI_ANY_ID, PCI_ANY_ID,
0, 0, pbn_wch384_4 },
+ /*
+ * Realtek RealManage
+ */
+ { PCI_VENDOR_ID_REALTEK, 0x816a,
+ PCI_ANY_ID, PCI_ANY_ID,
+ 0, 0, pbn_b0_1_115200 },
+
+ { PCI_VENDOR_ID_REALTEK, 0x816b,
+ PCI_ANY_ID, PCI_ANY_ID,
+ 0, 0, pbn_b0_1_115200 },
+
/* Fintek PCI serial cards */
{ PCI_DEVICE(0x1c29, 0x1104), .driver_data = pbn_fintek_4 },
{ PCI_DEVICE(0x1c29, 0x1108), .driver_data = pbn_fintek_8 },
next prev parent reply other threads:[~2020-09-21 16:58 UTC|newest]
Thread overview: 59+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-09-21 16:27 [PATCH 4.19 00/49] 4.19.147-rc1 review Greg Kroah-Hartman
2020-09-21 16:27 ` [PATCH 4.19 01/49] dsa: Allow forwarding of redirected IGMP traffic Greg Kroah-Hartman
2020-09-21 16:27 ` [PATCH 4.19 02/49] scsi: qla2xxx: Update rscn_rcvd field to more meaningful scan_needed Greg Kroah-Hartman
2020-09-21 16:27 ` [PATCH 4.19 03/49] scsi: qla2xxx: Move rport registration out of internal work_list Greg Kroah-Hartman
2020-09-21 16:27 ` [PATCH 4.19 04/49] scsi: qla2xxx: Reduce holding sess_lock to prevent CPU lock-up Greg Kroah-Hartman
2020-09-21 16:27 ` [PATCH 4.19 05/49] gfs2: initialize transaction tr_ailX_lists earlier Greg Kroah-Hartman
2020-09-21 16:27 ` [PATCH 4.19 06/49] RDMA/bnxt_re: Restrict the max_gids to 256 Greg Kroah-Hartman
2020-09-21 16:27 ` [PATCH 4.19 07/49] net: handle the return value of pskb_carve_frag_list() correctly Greg Kroah-Hartman
2020-09-21 16:27 ` [PATCH 4.19 08/49] hv_netvsc: Remove "unlikely" from netvsc_select_queue Greg Kroah-Hartman
2020-09-21 16:27 ` [PATCH 4.19 09/49] NFSv4.1 handle ERR_DELAY error reclaiming locking state on delegation recall Greg Kroah-Hartman
2020-09-21 16:27 ` [PATCH 4.19 10/49] scsi: pm8001: Fix memleak in pm8001_exec_internal_task_abort Greg Kroah-Hartman
2020-09-22 15:29 ` Pavel Machek
2020-09-21 16:27 ` [PATCH 4.19 11/49] scsi: libfc: Fix for double free() Greg Kroah-Hartman
2020-09-21 16:27 ` [PATCH 4.19 12/49] scsi: lpfc: Fix FLOGI/PLOGI receive race condition in pt2pt discovery Greg Kroah-Hartman
2020-09-21 16:27 ` [PATCH 4.19 13/49] regulator: pwm: Fix machine constraints application Greg Kroah-Hartman
2020-09-21 16:27 ` [PATCH 4.19 14/49] spi: spi-loopback-test: Fix out-of-bounds read Greg Kroah-Hartman
2020-09-21 16:27 ` [PATCH 4.19 15/49] NFS: Zero-stateid SETATTR should first return delegation Greg Kroah-Hartman
2020-09-21 16:28 ` [PATCH 4.19 16/49] SUNRPC: stop printk reading past end of string Greg Kroah-Hartman
2020-09-21 16:28 ` [PATCH 4.19 17/49] rapidio: Replace select DMAENGINES with depends on Greg Kroah-Hartman
2020-09-21 16:28 ` [PATCH 4.19 18/49] openrisc: Fix cache API compile issue when not inlining Greg Kroah-Hartman
2020-09-21 16:28 ` [PATCH 4.19 19/49] nvme-fc: cancel async events before freeing event struct Greg Kroah-Hartman
2020-09-21 16:28 ` [PATCH 4.19 20/49] nvme-rdma: " Greg Kroah-Hartman
2020-09-21 16:28 ` [PATCH 4.19 21/49] f2fs: fix indefinite loop scanning for free nid Greg Kroah-Hartman
2020-09-21 16:28 ` [PATCH 4.19 22/49] f2fs: Return EOF on unaligned end of file DIO read Greg Kroah-Hartman
2020-09-21 16:28 ` [PATCH 4.19 23/49] i2c: algo: pca: Reapply i2c bus settings after reset Greg Kroah-Hartman
2020-09-21 16:28 ` [PATCH 4.19 24/49] spi: Fix memory leak on splited transfers Greg Kroah-Hartman
2020-09-21 16:28 ` [PATCH 4.19 25/49] KVM: MIPS: Change the definition of kvm type Greg Kroah-Hartman
2020-09-21 16:28 ` [PATCH 4.19 26/49] clk: davinci: Use the correct size when allocating memory Greg Kroah-Hartman
2020-09-21 16:28 ` [PATCH 4.19 27/49] clk: rockchip: Fix initialization of mux_pll_src_4plls_p Greg Kroah-Hartman
2020-09-21 16:28 ` [PATCH 4.19 28/49] ASoC: qcom: Set card->owner to avoid warnings Greg Kroah-Hartman
2020-09-21 16:28 ` [PATCH 4.19 29/49] Drivers: hv: vmbus: Add timeout to vmbus_wait_for_unload Greg Kroah-Hartman
2020-09-21 16:28 ` [PATCH 4.19 30/49] perf test: Fix the "signal" test inline assembly Greg Kroah-Hartman
2020-09-21 16:28 ` [PATCH 4.19 31/49] MIPS: SNI: Fix MIPS_L1_CACHE_SHIFT Greg Kroah-Hartman
2020-09-21 16:28 ` [PATCH 4.19 32/49] perf test: Free formats for perf pmu parse test Greg Kroah-Hartman
2020-09-21 16:28 ` [PATCH 4.19 33/49] fbcon: Fix user font detection test at fbcon_resize() Greg Kroah-Hartman
2020-09-21 16:28 ` [PATCH 4.19 34/49] MIPS: SNI: Fix spurious interrupts Greg Kroah-Hartman
2020-09-21 16:28 ` [PATCH 4.19 35/49] drm/mediatek: Add exception handing in mtk_drm_probe() if component init fail Greg Kroah-Hartman
2020-09-21 16:28 ` [PATCH 4.19 36/49] drm/mediatek: Add missing put_device() call in mtk_hdmi_dt_parse_pdata() Greg Kroah-Hartman
2020-09-21 16:28 ` [PATCH 4.19 37/49] USB: quirks: Add USB_QUIRK_IGNORE_REMOTE_WAKEUP quirk for BYD zhaoxin notebook Greg Kroah-Hartman
2020-09-21 16:28 ` [PATCH 4.19 38/49] USB: UAS: fix disconnect by unplugging a hub Greg Kroah-Hartman
2020-09-21 16:28 ` [PATCH 4.19 39/49] usblp: fix race between disconnect() and read() Greg Kroah-Hartman
2020-09-21 16:28 ` [PATCH 4.19 40/49] i2c: i801: Fix resume bug Greg Kroah-Hartman
2020-09-21 16:28 ` [PATCH 4.19 41/49] Revert "ALSA: hda - Fix silent audio output and corrupted input on MSI X570-A PRO" Greg Kroah-Hartman
2020-09-21 16:28 ` [PATCH 4.19 42/49] percpu: fix first chunk size calculation for populated bitmap Greg Kroah-Hartman
2020-09-21 16:28 ` [PATCH 4.19 43/49] Input: trackpoint - add new trackpoint variant IDs Greg Kroah-Hartman
2020-09-22 15:39 ` Pavel Machek
2020-09-22 16:16 ` Greg Kroah-Hartman
2020-09-22 20:24 ` Pavel Machek
2020-09-23 20:42 ` Dmitry Torokhov
2020-09-24 2:16 ` Vincent Huang
2020-09-21 16:28 ` [PATCH 4.19 44/49] Input: i8042 - add Entroware Proteus EL07R4 to nomux and reset lists Greg Kroah-Hartman
2020-09-21 16:28 ` Greg Kroah-Hartman [this message]
2020-09-21 16:28 ` [PATCH 4.19 46/49] x86/boot/compressed: Disable relocation relaxation Greg Kroah-Hartman
2020-09-21 16:28 ` [PATCH 4.19 47/49] ehci-hcd: Move include to keep CRC stable Greg Kroah-Hartman
2020-09-21 16:28 ` [PATCH 4.19 48/49] powerpc/dma: Fix dma_map_ops::get_required_mask Greg Kroah-Hartman
2020-09-21 16:28 ` [PATCH 4.19 49/49] x86/defconfig: Enable CONFIG_USB_XHCI_HCD=y Greg Kroah-Hartman
2020-09-22 8:42 ` [PATCH 4.19 00/49] 4.19.147-rc1 review Naresh Kamboju
2020-09-22 9:56 ` Nobuhiro Iwamatsu
2020-09-22 20:18 ` Guenter Roeck
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200921162036.649907780@linuxfoundation.org \
--to=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=stable@vger.kernel.org \
--cc=tobiasdiedrich@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox