From: Dan Murphy <dmurphy@ti.com>
To: <davem@davemloft.net>, <andrew@lunn.ch>, <f.fainelli@gmail.com>,
<hkallweit1@gmail.com>
Cc: <netdev@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
Dan Murphy <dmurphy@ti.com>
Subject: [PATCH net-next 0/2] DP83TD510 Single Pair 10Mbps Ethernet PHY
Date: Thu, 8 Oct 2020 11:23:45 -0500 [thread overview]
Message-ID: <20201008162347.5290-1-dmurphy@ti.com> (raw)
Hello
The DP83TD510 is an Ethernet PHY supporting single pair of twisted wires. The
PHY is capable of 10Mbps communication over long distances and exceeds the
IEEE 802.3cg 10BASE-T1L single-pair Ethernet specification. The PHY supports
various voltage level signalling and can be forced to support a specific
voltage or allowed to perfrom auto negotiation on the voltage level. The
default for the PHY is auto negotiation but if the PHY is forced to a specific
voltage then the LP must also support the same voltage.
Dan
Dan Murphy (2):
dt-bindings: dp83td510: Add binding for DP83TD510 Ethernet PHY
net: phy: dp83td510: Add support for the DP83TD510 Ethernet PHY
.../devicetree/bindings/net/ti,dp83td510.yaml | 70 +++
drivers/net/phy/Kconfig | 6 +
drivers/net/phy/Makefile | 1 +
drivers/net/phy/dp83td510.c | 583 ++++++++++++++++++
4 files changed, 660 insertions(+)
create mode 100644 Documentation/devicetree/bindings/net/ti,dp83td510.yaml
create mode 100644 drivers/net/phy/dp83td510.c
--
2.28.0.585.ge1cfff676549
next reply other threads:[~2020-10-08 16:23 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-10-08 16:23 Dan Murphy [this message]
2020-10-08 16:23 ` [PATCH net-next 1/2] dt-bindings: dp83td510: Add binding for DP83TD510 Ethernet PHY Dan Murphy
2020-10-08 17:11 ` Florian Fainelli
2020-10-08 18:18 ` Dan Murphy
2020-10-08 16:23 ` [PATCH net-next 2/2] net: phy: dp83td510: Add support for the " Dan Murphy
2020-10-08 16:51 ` Heiner Kallweit
2020-10-08 17:00 ` Dan Murphy
2020-10-16 22:02 ` Andrew Lunn
2020-10-19 21:33 ` Dan Murphy
2020-10-19 21:55 ` Andrew Lunn
2020-10-19 22:04 ` Dan Murphy
2020-10-20 12:00 ` Dan Murphy
2020-10-20 13:46 ` Andrew Lunn
-- strict thread matches above, loose matches on Subject: below --
2020-10-08 16:22 [PATCH net-next 0/2] DP83TD510 Single Pair 10Mbps " Dan Murphy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201008162347.5290-1-dmurphy@ti.com \
--to=dmurphy@ti.com \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=f.fainelli@gmail.com \
--cc=hkallweit1@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox