Re: [PATCH 1/1] usb: serial: option: add Quectel EC200T module support

septs
2020-10-18T17:07:35Z

Add usb product id of the Quectel EC200T module.

Signed-off-by: septs <kernel@septs.pw>
---
drivers/usb/serial/option.c | 2 ++
1 file changed, 2 insertions(+)

diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 2a3bfd6f8..7e879233b 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -250,6 +250,7 @@ static void option_instat_callback(struct urb *urb);
#define QUECTEL_PRODUCT_EP06 0x0306
#define QUECTEL_PRODUCT_EM12 0x0512
#define QUECTEL_PRODUCT_RM500Q 0x0800
+#define QUECTEL_PRODUCT_EC200T 0x6026

#define CMOTECH_VENDOR_ID 0x16d8
#define CMOTECH_PRODUCT_6001 0x6001
@@ -1117,6 +1118,7 @@ static const struct usb_device_id option_ids[] = {
{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM500Q, 0xff, 0, 0) },
{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM500Q, 0xff, 0xff, 0x10),
.driver_info = ZLP },
+ { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EC200T, 0xff, 0, 0) },

{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6001) },
{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CMU_300) },
--
2.25.1

On Sun, Oct 18, 2020, at 20:49, Greg Kroah-Hartman wrote:
> On Sun, Oct 18, 2020 at 06:51:11PM +0800, septs wrote:
> > Add usb product id of the Quectel EC200T module.
> > ---
> > drivers/usb/serial/option.c | 2 ++
> > 1 file changed, 2 insertions(+)
> >
> > diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
> > index 2a3bfd6f8..7e879233b 100644
> > --- a/drivers/usb/serial/option.c
> > +++ b/drivers/usb/serial/option.c
> > @@ -250,6 +250,7 @@ static void option_instat_callback(struct urb *urb);
> > #define QUECTEL_PRODUCT_EP06 0x0306
> > #define QUECTEL_PRODUCT_EM12 0x0512
> > #define QUECTEL_PRODUCT_RM500Q 0x0800
> > +#define QUECTEL_PRODUCT_EC200T 0x6026
> >
> > #define CMOTECH_VENDOR_ID 0x16d8
> > #define CMOTECH_PRODUCT_6001 0x6001
> > @@ -1117,6 +1118,7 @@ static const struct usb_device_id option_ids[] = {
> > { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM500Q, 0xff, 0, 0) },
> > { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM500Q, 0xff, 0xff, 0x10),
> > .driver_info = ZLP },
> > + { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EC200T, 0xff, 0, 0) },
> >
> > { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6001) },
> > { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CMU_300) },
> > --
> > 2.25.1
> >
>
> Hi,
>
> This is the friendly patch-bot of Greg Kroah-Hartman. You have sent him
> a patch that has triggered this response. He used to manually respond
> to these common problems, but in order to save his sanity (he kept
> writing the same thing over and over, yet to different people), I was
> created. Hopefully you will not take offence and will fix the problem
> in your patch and resubmit it so that it can be accepted into the Linux
> kernel tree.
>
> You are receiving this message because of the following common error(s)
> as indicated below:
>
> - Your patch does not have a Signed-off-by: line. Please read the
> kernel file, Documentation/SubmittingPatches and resend it after
> adding that line. Note, the line needs to be in the body of the
> email, before the patch, not at the bottom of the patch or in the
> email signature.
>
>
> - It looks like you did not use your "real" name for the patch on either
> the Signed-off-by: line, or the From: line (both of which have to
> match). Please read the kernel file, Documentation/SubmittingPatches
> for how to do this correctly.
>
> If you wish to discuss this problem further, or you have questions about
> how to resolve this issue, please feel free to respond to this email and
> Greg will reply once he has dug out from the pending patches received
> from other developers.
>
> thanks,
>
> greg k-h's patch email bot
>