Re: [RESEND PATCH v3] hwmon: add Corsair PSU HID controller driver

[Wilken Gottwalt <wilken.gottwalt@posteo.net>]

On Fri, 30 Oct 2020 10:33:23 -0700
Guenter Roeck <linux@roeck-us.net> wrote:

> On Fri, Oct 30, 2020 at 06:38:31AM +0100, Wilken Gottwalt wrote:
> > The Corsair digital power supplies of the series RMi, HXi and AXi include
> > a small micro-controller with a lot of sensors attached. The sensors can
> > be accessed by an USB connector from the outside.
> > 
> > This micro-controller provides the data by a simple proprietary USB HID
> > protocol. The data consist of temperatures, current and voltage levels,
> > power usage, uptimes, fan speed and some more. It is also possible to
> > configure the PSU (fan mode, mono/multi-rail, over current protection).
> > 
> > This driver provides access to the sensors/statistics of the RMi and HXi
> > series power supplies. It does not support configuring these devices,
> > because there would be many ways to misconfigure or even damage the PSU.
> > 
> > This patch adds:
> > - hwmon driver corsair-psu
> > - hwmon documentation
> > - updates MAINTAINERS
> > 
> > Signed-off-by: Wilken Gottwalt <wilken.gottwalt@posteo.net>
> 
> No need to resend. It is in my queue.
> 

Oh, I thought you didn't get it before. I noticed you had some mail trouble,
too. Just wanted to be sure mailing worked this time.

greetings,
Wilken