Re: [PATCH v2 3/4] drm/bridge: ti-sn65dsi86: Read EDID blob over DDC

[Laurent Pinchart <laurent.pinchart@ideasonboard.com>]

Hi Stephen,

Thank you for the patch.

On Thu, Oct 29, 2020 at 06:17:37PM -0700, Stephen Boyd wrote:
> Use the DDC connection to read the EDID from the eDP panel instead of
> relying on the panel to tell us the modes.
> 
> Reviewed-by: Douglas Anderson <dianders@chromium.org>
> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
> Cc: Jonas Karlman <jonas@kwiboo.se>
> Cc: Jernej Skrabec <jernej.skrabec@siol.net>
> Cc: Sean Paul <seanpaul@chromium.org>
> Signed-off-by: Stephen Boyd <swboyd@chromium.org>
> ---
>  drivers/gpu/drm/bridge/ti-sn65dsi86.c | 20 ++++++++++++++++++++
>  1 file changed, 20 insertions(+)
> 
> diff --git a/drivers/gpu/drm/bridge/ti-sn65dsi86.c b/drivers/gpu/drm/bridge/ti-sn65dsi86.c
> index c77f46a21aae..f86934fd6cc8 100644
> --- a/drivers/gpu/drm/bridge/ti-sn65dsi86.c
> +++ b/drivers/gpu/drm/bridge/ti-sn65dsi86.c
> @@ -119,6 +119,7 @@
>   * @debugfs:      Used for managing our debugfs.
>   * @host_node:    Remote DSI node.
>   * @dsi:          Our MIPI DSI source.
> + * @edid:         Detected EDID of eDP panel.
>   * @refclk:       Our reference clock.
>   * @panel:        Our panel.
>   * @enable_gpio:  The GPIO we toggle to enable the bridge.
> @@ -144,6 +145,7 @@ struct ti_sn_bridge {
>  	struct drm_bridge		bridge;
>  	struct drm_connector		connector;
>  	struct dentry			*debugfs;
> +	struct edid			*edid;
>  	struct device_node		*host_node;
>  	struct mipi_dsi_device		*dsi;
>  	struct clk			*refclk;
> @@ -265,6 +267,23 @@ connector_to_ti_sn_bridge(struct drm_connector *connector)
>  static int ti_sn_bridge_connector_get_modes(struct drm_connector *connector)
>  {
>  	struct ti_sn_bridge *pdata = connector_to_ti_sn_bridge(connector);
> +	struct edid *edid = pdata->edid;
> +	int num, ret;
> +
> +	if (!edid) {
> +		pm_runtime_get_sync(pdata->dev);
> +		edid = pdata->edid = drm_get_edid(connector, &pdata->aux.ddc);
> +		pm_runtime_put(pdata->dev);
> +	}

Do we need to cache the EDID ? It seems like something that should be
done by the DRM core (well, caching modes in that case), not by
individual bridge drivers.

Apart from that,

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

> +
> +	if (edid && drm_edid_is_valid(edid)) {
> +		ret = drm_connector_update_edid_property(connector, edid);
> +		if (!ret) {
> +			num = drm_add_edid_modes(connector, edid);
> +			if (num)
> +				return num;
> +		}
> +	}
>  
>  	return drm_panel_get_modes(pdata->panel, connector);
>  }
> @@ -1245,6 +1264,7 @@ static int ti_sn_bridge_remove(struct i2c_client *client)
>  	if (!pdata)
>  		return -EINVAL;
>  
> +	kfree(pdata->edid);
>  	ti_sn_debugfs_remove(pdata);
>  
>  	of_node_put(pdata->host_node);

-- 
Regards,

Laurent Pinchart