From: Daniel Vetter <daniel@ffwll.ch>
To: Maxime Ripard <maxime@cerno.tech>
Cc: Thomas Zimmermann <tzimmermann@suse.de>,
Tian Tao <tiantao6@hisilicon.com>,
maarten.lankhorst@linux.intel.com, airlied@linux.ie,
daniel@ffwll.ch, dri-devel@lists.freedesktop.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2] drm: Add the new api to install irq
Date: Tue, 3 Nov 2020 11:55:08 +0100 [thread overview]
Message-ID: <20201103105508.GD401619@phenom.ffwll.local> (raw)
In-Reply-To: <20201103103832.gwjqf4urrn5y7zk5@gilmour.lan>
On Tue, Nov 03, 2020 at 11:38:32AM +0100, Maxime Ripard wrote:
> On Tue, Nov 03, 2020 at 11:10:27AM +0100, Thomas Zimmermann wrote:
> > Hi
> >
> > Am 03.11.20 um 10:52 schrieb Maxime Ripard:
> > > On Tue, Nov 03, 2020 at 10:10:41AM +0800, Tian Tao wrote:
> > >> Add new api devm_drm_irq_install() to register interrupts,
> > >> no need to call drm_irq_uninstall() when the drm module is removed.
> > >>
> > >> v2:
> > >> fixed the wrong parameter.
> > >>
> > >> Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
> > >> ---
> > >> drivers/gpu/drm/drm_drv.c | 23 +++++++++++++++++++++++
> > >> include/drm/drm_drv.h | 3 ++-
> > >> 2 files changed, 25 insertions(+), 1 deletion(-)
> > >>
> > >> diff --git a/drivers/gpu/drm/drm_drv.c b/drivers/gpu/drm/drm_drv.c
> > >> index cd162d4..0fe5243 100644
> > >> --- a/drivers/gpu/drm/drm_drv.c
> > >> +++ b/drivers/gpu/drm/drm_drv.c
> > >> @@ -39,6 +39,7 @@
> > >> #include <drm/drm_color_mgmt.h>
> > >> #include <drm/drm_drv.h>
> > >> #include <drm/drm_file.h>
> > >> +#include <drm/drm_irq.h>
> > >> #include <drm/drm_managed.h>
> > >> #include <drm/drm_mode_object.h>
> > >> #include <drm/drm_print.h>
> > >> @@ -678,6 +679,28 @@ static int devm_drm_dev_init(struct device *parent,
> > >> return ret;
> > >> }
> > >>
> > >> +static void devm_drm_dev_irq_uninstall(void *data)
> > >> +{
> > >> + drm_irq_uninstall(data);
> > >> +}
> > >> +
> > >> +int devm_drm_irq_install(struct device *parent,
> > >> + struct drm_device *dev, int irq)
> > >> +{
> > >> + int ret;
> > >> +
> > >> + ret = drm_irq_install(dev, irq);
> > >> + if (ret)
> > >> + return ret;
> > >> +
> > >> + ret = devm_add_action(parent, devm_drm_dev_irq_uninstall, dev);
> > >> + if (ret)
> > >> + devm_drm_dev_irq_uninstall(dev);
> > >> +
> > >> + return ret;
> > >> +}
> > >> +EXPORT_SYMBOL(devm_drm_irq_install);
> > >> +
> > >
> > > Shouldn't we tie the IRQ to the drm device (so with drmm_add_action)
> > > instead of tying it to the underlying device?
> >
> > If the HW device goes away, there won't be any more interrupts. So it's
> > similar to devm_ functions for I/O memory. Why would you use the drmm_
> > interface?
>
> drm_irq_install/uninstall do more that just calling request_irq and
> free_irq though, they will also run (among other things) the irq-related
> hooks in the drm driver (irq_preinstall, irq_postinstall irq_uninstall)
> and wake anything waiting for a vblank to occur, so we need the DRM
> device and driver to still be around when we run drm_irq_uninstall.
> That's why (I assume) you have to pass the drm_device as an argument and
> not simply the device.
drm_device is guaranteed to outlive devm_, plus the hooks are meant to
shut down hw. hw isn't around anymore when we do drmm_ cleanup, at least
not in full generality.
> This probably works in most case since you would allocate the drm_device
> with devm_drm_dev_alloc, and then run drm_irq_install, so in the undoing
> phase you would have first drm_irq_uninstall to run, and everything is
> fine.
>
> However, if one doesn't use devm_drm_dev_alloc but would use
> devm_drm_irq_install, you would have first remove being called that
> would free the drm device, and then drm_irq_uninstall which will use a
> free'd pointer.
Don't do that, it's broken :-)
> So yeah, even though the interrupt line itself is tied to the device,
> all the logic we have around the interrupt that is dealt with in
> drm_irq_install is really tied to the drm_device. And since we tie the
> life of drm_device to its underlying device already (either implicitly
> through devm_drm_dev_alloc, or explictly through manual allocation in
> probe and free in remove) we can't end up in a situation where the
> drm_device outlives its device.
Most drivers get their drm_device lifetime completely wrong. That's why I
typed drmm_ stuff. So this isn't a surprise at all, but it might motiveate
a bunch more people to fix this up correctly.
Also, these drm_irq functions are 100% optional helpers (should maybe
rename them to make this clearer) for modern drivers. They're only built
in for DRIVER_LEGACY, because hysterical raisins.
-Daniel
--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
next prev parent reply other threads:[~2020-11-03 10:55 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-11-03 2:10 [PATCH v2] drm: Add the new api to install irq Tian Tao
2020-11-03 7:56 ` Thomas Zimmermann
2020-11-03 8:57 ` tiantao (H)
2020-11-03 9:04 ` Thomas Zimmermann
2020-11-03 9:36 ` Sam Ravnborg
2020-11-03 9:52 ` Maxime Ripard
2020-11-03 10:10 ` Thomas Zimmermann
2020-11-03 10:38 ` Maxime Ripard
2020-11-03 10:55 ` Daniel Vetter [this message]
2020-11-03 11:25 ` Thomas Zimmermann
2020-11-03 11:46 ` Daniel Vetter
2020-11-03 11:25 ` Maxime Ripard
2020-11-04 9:37 ` Daniel Vetter
2020-11-03 10:23 ` Daniel Vetter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201103105508.GD401619@phenom.ffwll.local \
--to=daniel@ffwll.ch \
--cc=airlied@linux.ie \
--cc=dri-devel@lists.freedesktop.org \
--cc=linux-kernel@vger.kernel.org \
--cc=maarten.lankhorst@linux.intel.com \
--cc=maxime@cerno.tech \
--cc=tiantao6@hisilicon.com \
--cc=tzimmermann@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox