From: Wong Vee Khee <vee.khee.wong@intel.com>
To: Giuseppe Cavallaro <peppe.cavallaro@st.com>,
Alexandre Torgue <alexandre.torgue@st.com>,
Jose Abreu <joabreu@synopsys.com>,
"David S . Miller" <davem@davemloft.net>,
Jakub Kicinski <kuba@kernel.org>,
Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: netdev@vger.kernel.org, linux-stm32@st-md-mailman.stormreply.com,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org,
Ong Boon Leong <boon.leong.ong@intel.com>,
Voon Wei Feng <weifeng.voon@intel.com>,
Wong Vee Khee <vee.khee.wong@intel.com>
Subject: [PATCH net-next 1/1] stmmac: intel: change all EHL/TGL to auto detect phy addr
Date: Fri, 6 Nov 2020 17:43:41 +0800 [thread overview]
Message-ID: <20201106094341.4241-1-vee.khee.wong@intel.com> (raw)
From: Voon Weifeng <weifeng.voon@intel.com>
Set all EHL/TGL phy_addr to -1 so that the driver will automatically
detect it at run-time by probing all the possible 32 addresses.
Signed-off-by: Voon Weifeng <weifeng.voon@intel.com>
Signed-off-by: Wong Vee Khee <vee.khee.wong@intel.com>
---
drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c | 6 +-----
1 file changed, 1 insertion(+), 5 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c
index b6e5e3e36b63..7c1353f37247 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c
@@ -236,6 +236,7 @@ static int intel_mgbe_common_data(struct pci_dev *pdev,
int ret;
int i;
+ plat->phy_addr = -1;
plat->clk_csr = 5;
plat->has_gmac = 0;
plat->has_gmac4 = 1;
@@ -345,7 +346,6 @@ static int ehl_sgmii_data(struct pci_dev *pdev,
struct plat_stmmacenet_data *plat)
{
plat->bus_id = 1;
- plat->phy_addr = 0;
plat->phy_interface = PHY_INTERFACE_MODE_SGMII;
plat->serdes_powerup = intel_serdes_powerup;
@@ -362,7 +362,6 @@ static int ehl_rgmii_data(struct pci_dev *pdev,
struct plat_stmmacenet_data *plat)
{
plat->bus_id = 1;
- plat->phy_addr = 0;
plat->phy_interface = PHY_INTERFACE_MODE_RGMII;
return ehl_common_data(pdev, plat);
@@ -376,7 +375,6 @@ static int ehl_pse0_common_data(struct pci_dev *pdev,
struct plat_stmmacenet_data *plat)
{
plat->bus_id = 2;
- plat->phy_addr = 1;
return ehl_common_data(pdev, plat);
}
@@ -408,7 +406,6 @@ static int ehl_pse1_common_data(struct pci_dev *pdev,
struct plat_stmmacenet_data *plat)
{
plat->bus_id = 3;
- plat->phy_addr = 1;
return ehl_common_data(pdev, plat);
}
@@ -450,7 +447,6 @@ static int tgl_sgmii_data(struct pci_dev *pdev,
struct plat_stmmacenet_data *plat)
{
plat->bus_id = 1;
- plat->phy_addr = 0;
plat->phy_interface = PHY_INTERFACE_MODE_SGMII;
plat->serdes_powerup = intel_serdes_powerup;
plat->serdes_powerdown = intel_serdes_powerdown;
--
2.17.0
next reply other threads:[~2020-11-06 9:40 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-11-06 9:43 Wong Vee Khee [this message]
2020-11-08 0:20 ` [PATCH net-next 1/1] stmmac: intel: change all EHL/TGL to auto detect phy addr patchwork-bot+netdevbpf
2021-01-16 9:12 ` Jan Kiszka
2021-01-17 0:59 ` Jakub Kicinski
2021-01-17 14:28 ` Greg Kroah-Hartman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201106094341.4241-1-vee.khee.wong@intel.com \
--to=vee.khee.wong@intel.com \
--cc=alexandre.torgue@st.com \
--cc=boon.leong.ong@intel.com \
--cc=davem@davemloft.net \
--cc=joabreu@synopsys.com \
--cc=kuba@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=mcoquelin.stm32@gmail.com \
--cc=netdev@vger.kernel.org \
--cc=peppe.cavallaro@st.com \
--cc=weifeng.voon@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox