[PATCH 3/8] arm64: dts: bitmain: Use generic "ngpios" rather than "snps,nr-gpios"

Jisheng Zhang
2020-11-09T09:07:45Z

This is to remove similar errors as below:

OF: /.../gpio-port@0: could not find phandle

Commit 7569486d79ae ("gpio: dwapb: Add ngpios DT-property support")
explained the reason of above errors well and added the generic
"ngpios" property, let's use it.

Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
---
arch/arm64/boot/dts/bitmain/bm1880.dtsi | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/boot/dts/bitmain/bm1880.dtsi b/arch/arm64/boot/dts/bitmain/bm1880.dtsi
index fa6e6905f588..53a9b76057aa 100644
--- a/arch/arm64/boot/dts/bitmain/bm1880.dtsi
+++ b/arch/arm64/boot/dts/bitmain/bm1880.dtsi
@@ -127,7 +127,7 @@ porta: gpio-controller@0 {
compatible = "snps,dw-apb-gpio-port";
gpio-controller;
#gpio-cells = <2>;
- snps,nr-gpios = <32>;
+ ngpios = <32>;
reg = <0>;
interrupt-controller;
#interrupt-cells = <2>;
@@ -145,7 +145,7 @@ portb: gpio-controller@0 {
compatible = "snps,dw-apb-gpio-port";
gpio-controller;
#gpio-cells = <2>;
- snps,nr-gpios = <32>;
+ ngpios = <32>;
reg = <0>;
interrupt-controller;
#interrupt-cells = <2>;
@@ -163,7 +163,7 @@ portc: gpio-controller@0 {
compatible = "snps,dw-apb-gpio-port";
gpio-controller;
#gpio-cells = <2>;
- snps,nr-gpios = <8>;
+ ngpios = <8>;
reg = <0>;
interrupt-controller;
#interrupt-cells = <2>;
--
2.29.2