Re: [PATCH] Revert "usb: cdns3: core: quit if it uses role switch class"

[Peter Chen <peter.chen@nxp.com>]

On 20-11-24 12:33:34, Roger Quadros wrote:
> > > > 
> > > > I am sorry about that. Do you use role switch /sys entry, if you have
> > > > used, I prefer using "usb-role-switch" property at dts to judge if SoC
> > > > OTG signals or external signals for role switch. If you have not used
> > > > it, I prefer only setting cdns->role_sw for role switch use cases.
> > > > 
> > > 
> > > We use both hardware role switch and /sys entries for manually forcing a
> > > certain role.
> > > 
> > > We do not set any "usb-role-switch" property at DTS.
> > > 
> > > Currently cdns->role_sw is being always set by driver irrespective of any DT
> > > property, so this patch is clearly wrong and needs to be reverted.
> > > 
> > > What do you think?
> > > 
> > 
> > Could you accept below fix?
> > 
> > diff --git a/drivers/usb/cdns3/core.c b/drivers/usb/cdns3/core.c
> > index 2e469139769f..fdd52e87a7b2 100644
> > --- a/drivers/usb/cdns3/core.c
> > +++ b/drivers/usb/cdns3/core.c
> > @@ -280,8 +280,8 @@ int cdns3_hw_role_switch(struct cdns3 *cdns)
> >          enum usb_role real_role, current_role;
> >          int ret = 0;
> > 
> > -       /* Depends on role switch class */
> > -       if (cdns->role_sw)
> > +       /* quit if switch role through external signals */
> > +       if (device_property_read_bool(cdns->dev, "usb-role-switch"))
> >                  return 0;
> > 
> >          pm_runtime_get_sync(cdns->dev);
> 
> Although this will fix the issue I don't think this is making the driver to behave
> as expected with usb-role-switch property.
> 
> Now, even if usb-role-switch property is not present the driver will still register
> the role switch driver.
> 
> I think we need to register the role switch driver only if usb-role-switch property
> is present. We would also need to set the default role if role-switch-default-mode is present.
> 
> How about the following? It still doesn't handle role-switch-default-mode property though.
> 

Roger, you said you also use /sys entries (I suppose it means through role
switch class) to do role switch, with your change, there will be no /sys
entry for role switch.

Peter

> > > We use both hardware role switch and /sys entries for manually forcing a
> > > certain role.




> diff --git a/drivers/usb/cdns3/core.c b/drivers/usb/cdns3/core.c
> index 4c1445cf2ad0..986b56a9940c 100644
> --- a/drivers/usb/cdns3/core.c
> +++ b/drivers/usb/cdns3/core.c
> @@ -532,11 +532,13 @@ static int cdns3_probe(struct platform_device *pdev)
>  	if (device_property_read_bool(dev, "usb-role-switch"))
>  		sw_desc.fwnode = dev->fwnode;
> -	cdns->role_sw = usb_role_switch_register(dev, &sw_desc);
> -	if (IS_ERR(cdns->role_sw)) {
> -		ret = PTR_ERR(cdns->role_sw);
> -		dev_warn(dev, "Unable to register Role Switch\n");
> -		goto err3;
> +	if (device_property_read_bool(cdns->dev, "usb-role-switch")) {
> +		cdns->role_sw = usb_role_switch_register(dev, &sw_desc);
> +		if (IS_ERR(cdns->role_sw)) {
> +			ret = PTR_ERR(cdns->role_sw);
> +			dev_warn(dev, "Unable to register Role Switch\n");
> +			goto err3;
> +		}
>  	}
>  	if (cdns->wakeup_irq) {
> 
> 
> 
> cheers,
> -roger
> -- 
> Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
> Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki

-- 

Thanks,
Peter Chen