[PATCH v2 0/3] Add reset support in ocelot driver for new platforms

[Gregory CLEMENT <gregory.clement@bootlin.com>]

Hello,

This series extends reset support for 2 other MIPS based SoCs: Luton
and Jaguar 2.

Patches 1 and 2 should be merged through the reset subsystem, while
the device tree changes in patches 3 should go through the mips
subsystem.

In this second series I removed the microchip,reset-switch-core
property support waiting for finding a butter solution for it.

Changelog:

 v1 -> v2:
 - Add binding documentation for the 2 new SoC
 - Fix compatible string in name device tree node
 - Add Acked-by from Alexande

Gregory

Gregory CLEMENT (3):
  dt-bindings: reset: ocelot: Add Luton and Jaguar2 support
  power: reset: ocelot: Add support 2 other MIPS based SoCs
  MIPS: dts: mscc: add reset support for Luton and Jaguar2

 .../bindings/power/reset/ocelot-reset.txt     |  4 ++-
 arch/mips/boot/dts/mscc/jaguar2.dtsi          |  5 ++++
 arch/mips/boot/dts/mscc/luton.dtsi            |  5 ++++
 drivers/power/reset/ocelot-reset.c            | 30 +++++++++++++++++--
 4 files changed, 40 insertions(+), 4 deletions(-)

-- 
2.29.2