Re: [PATCH v4 1/3] thermal: power allocator: change the 'k_i' coefficient estimation

[Ionela Voinescu <ionela.voinescu@arm.com>]

Hi Lukasz,

On Tuesday 24 Nov 2020 at 16:10:23 (+0000), Lukasz Luba wrote:
> Intelligent Power Allocation (IPA) is built around the PID controller
> concept. The initialization code tries to setup the environment based on
> the information available in DT or estimate the value based on minimum
> power reported by each of the cooling device. The estimation will have an
> impact on the PID controller behaviour via the related 'k_po', 'k_pu',
> 'k_i' coefficients and also on the power budget calculation.
> 
> This change prevents the situation when 'k_i' is relatively big compared
> to 'k_po' and 'k_pu' values. This might happen when the estimation for
> 'sustainable_power' returned small value, thus 'k_po' and 'k_pu' are
> small.
> 
> Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
> ---
>  drivers/thermal/gov_power_allocator.c | 8 ++++++--
>  1 file changed, 6 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/thermal/gov_power_allocator.c b/drivers/thermal/gov_power_allocator.c
> index b29e21c56a4f..2e20085ed217 100644
> --- a/drivers/thermal/gov_power_allocator.c
> +++ b/drivers/thermal/gov_power_allocator.c
> @@ -134,6 +134,7 @@ static void estimate_pid_constants(struct thermal_zone_device *tz,
>  	int ret;
>  	int switch_on_temp;
>  	u32 temperature_threshold;
> +	s32 k_i;
>  
>  	ret = tz->ops->get_trip_temp(tz, trip_switch_on, &switch_on_temp);
>  	if (ret)
> @@ -159,8 +160,11 @@ static void estimate_pid_constants(struct thermal_zone_device *tz,
>  		tz->tzp->k_pu = int_to_frac(2 * sustainable_power) /
>  			temperature_threshold;
>  
> -	if (!tz->tzp->k_i || force)
> -		tz->tzp->k_i = int_to_frac(10) / 1000;
> +	if (!tz->tzp->k_i || force) {
> +		k_i = tz->tzp->k_pu / 10;
> +		tz->tzp->k_i = k_i > 0 ? k_i : 1;
> +	}
> +
>  	/*
>  	 * The default for k_d and integral_cutoff is 0, so we can
>  	 * leave them as they are.
> -- 

I see this patch did not change so:

Reviewed-by: Ionela Voinescu <ionela.voinescu@arm.com>

> 2.17.1
>