From: Borislav Petkov <bp@suse.de>
To: Linus Torvalds <torvalds@linux-foundation.org>
Cc: linux-edac <linux-edac@vger.kernel.org>,
lkml <linux-kernel@vger.kernel.org>
Subject: [GIT PULL] EDAC updates for 5.11
Date: Mon, 14 Dec 2020 12:04:22 +0100 [thread overview]
Message-ID: <20201214110422.GA26358@zn.tnic> (raw)
Hi Linus,
please pull the accumulated EDAC tree for 5.11. It was somewhat busier
than usual this cycle. Tag message has the details.
Thx.
---
The following changes since commit 0477e92881850d44910a7e94fc2c46f96faa131f:
Linux 5.10-rc7 (2020-12-06 14:25:12 -0800)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras.git tags/edac_updates_for_v5.11
for you to fetch changes up to f84b799996e29ad3b37e83f7871e79023f29979d:
Merge branches 'edac-spr', 'edac-igen6' and 'edac-misc' into edac-updates-for-v5.11 (2020-12-14 11:51:46 +0100)
----------------------------------------------------------------
- Add support for AST2400 and AST2600 hw to aspeed_edac (Troy Lee)
- Remove an orphaned mv64x60_edac driver. Good riddance. (Michael Ellerman)
- Add a new igen6 driver for Intel client SoCs with an integrated memory
controller and using in-band ECC (Qiuxu Zhuo and Tony Luck)
- The usual smattering of fixes and cleanups all over.
----------------------------------------------------------------
Borislav Petkov (3):
EDAC: Do not issue useless debug statements in the polling routine
EDAC/amd64: Fix PCI component registration
Merge branches 'edac-spr', 'edac-igen6' and 'edac-misc' into edac-updates-for-v5.11
Mauro Carvalho Chehab (1):
EDAC: Fix some kernel-doc markups
Michael Ellerman (1):
EDAC/mv64x60: Remove orphan mv64x60 driver
Qiuxu Zhuo (6):
EDAC: Add three new memory types
EDAC/igen6: Add EDAC driver for Intel client SoCs using IBECC
EDAC/igen6: Add debugfs interface for Intel client SoC EDAC driver
EDAC/i10nm: Use readl() to access MMIO registers
EDAC: Add DDR5 new memory type
EDAC/i10nm: Add Intel Sapphire Rapids server support
Tom Rix (1):
EDAC/amd64: Remove unneeded breaks
Tony Luck (2):
MAINTAINERS: Clean up the F: entries for some EDAC drivers
MAINTAINERS: Add entry for Intel IGEN6 EDAC driver
Troy Lee (3):
dt-bindings: edac: aspeed-sdram-edac: Add ast2400/ast2600 support
ARM: dts: aspeed: Add AST2600 EDAC into common devicetree
EDAC/aspeed: Add support for AST2400 and AST2600
Zhang Xiaoxu (1):
EDAC/synopsys: Return the correct value in mc_probe()
kernel test robot (1):
EDAC/igen6: ecclog_llist can be static
.../devicetree/bindings/edac/aspeed-sdram-edac.txt | 9 +-
MAINTAINERS | 11 +-
arch/arm/boot/dts/aspeed-g6.dtsi | 6 +
drivers/edac/Kconfig | 22 +-
drivers/edac/Makefile | 2 +-
drivers/edac/amd64_edac.c | 34 +-
drivers/edac/amd76x_edac.c | 1 -
drivers/edac/aspeed_edac.c | 7 +-
drivers/edac/e752x_edac.c | 1 -
drivers/edac/e7xxx_edac.c | 1 -
drivers/edac/edac_device.h | 11 +-
drivers/edac/edac_mc.c | 4 +
drivers/edac/i10nm_base.c | 39 +-
drivers/edac/i3000_edac.c | 1 -
drivers/edac/i3200_edac.c | 1 -
drivers/edac/i5000_edac.c | 2 +-
drivers/edac/i5400_edac.c | 2 +-
drivers/edac/i82443bxgx_edac.c | 1 -
drivers/edac/i82860_edac.c | 1 -
drivers/edac/i82875p_edac.c | 1 -
drivers/edac/i82975x_edac.c | 1 -
drivers/edac/ie31200_edac.c | 1 -
drivers/edac/igen6_edac.c | 977 +++++++++++++++++++++
drivers/edac/mv64x60_edac.c | 883 -------------------
drivers/edac/mv64x60_edac.h | 114 ---
drivers/edac/r82600_edac.c | 1 -
drivers/edac/skx_base.c | 6 +-
drivers/edac/skx_common.c | 23 +-
drivers/edac/skx_common.h | 16 +-
drivers/edac/synopsys_edac.c | 3 +-
drivers/edac/x38_edac.c | 1 -
include/linux/edac.h | 16 +-
32 files changed, 1119 insertions(+), 1080 deletions(-)
create mode 100644 drivers/edac/igen6_edac.c
delete mode 100644 drivers/edac/mv64x60_edac.c
delete mode 100644 drivers/edac/mv64x60_edac.h
--
Regards/Gruss,
Boris.
SUSE Software Solutions Germany GmbH, GF: Felix Imendörffer, HRB 36809, AG Nürnberg
next reply other threads:[~2020-12-14 11:09 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-12-14 11:04 Borislav Petkov [this message]
2020-12-14 22:02 ` [GIT PULL] EDAC updates for 5.11 pr-tracker-bot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201214110422.GA26358@zn.tnic \
--to=bp@suse.de \
--cc=linux-edac@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox