From: Xu Wang <vulab@iscas.ac.cn>
To: jic23@kernel.org, lars@metafoo.de, pmeerw@pmeerw.net,
mcoquelin.stm32@gmail.com, alexandre.torgue@st.com,
fabrice.gasnier@st.com, krzk@kernel.org,
andy.shevchenko@gmail.com, olivier.moysan@st.com,
etienne.carriere@st.com, alexandru.ardelean@analog.com,
peter.ujfalusi@ti.com, linux-iio@vger.kernel.org,
linux-stm32@st-md-mailman.stormreply.com,
linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Subject: [PATCH] iio: adc: stm32-adc: Remove redundant null check before clk_prepare_enable/clk_disable_unprepare
Date: Fri, 18 Dec 2020 09:35:12 +0000 [thread overview]
Message-ID: <20201218093512.871-1-vulab@iscas.ac.cn> (raw)
Because clk_prepare_enable() and clk_disable_unprepare() already checked
NULL clock parameter, so the additional checks are unnecessary, just
remove them.
Signed-off-by: Xu Wang <vulab@iscas.ac.cn>
---
drivers/iio/adc/stm32-adc-core.c | 29 +++++++++++------------------
drivers/iio/adc/stm32-adc.c | 14 +++++---------
2 files changed, 16 insertions(+), 27 deletions(-)
diff --git a/drivers/iio/adc/stm32-adc-core.c b/drivers/iio/adc/stm32-adc-core.c
index 9d1ad6e38e85..c088cb990193 100644
--- a/drivers/iio/adc/stm32-adc-core.c
+++ b/drivers/iio/adc/stm32-adc-core.c
@@ -535,20 +535,16 @@ static int stm32_adc_core_hw_start(struct device *dev)
goto err_switches_dis;
}
- if (priv->bclk) {
- ret = clk_prepare_enable(priv->bclk);
- if (ret < 0) {
- dev_err(dev, "bus clk enable failed\n");
- goto err_regulator_disable;
- }
+ ret = clk_prepare_enable(priv->bclk);
+ if (ret < 0) {
+ dev_err(dev, "bus clk enable failed\n");
+ goto err_regulator_disable;
}
- if (priv->aclk) {
- ret = clk_prepare_enable(priv->aclk);
- if (ret < 0) {
- dev_err(dev, "adc clk enable failed\n");
- goto err_bclk_disable;
- }
+ ret = clk_prepare_enable(priv->aclk);
+ if (ret < 0) {
+ dev_err(dev, "adc clk enable failed\n");
+ goto err_bclk_disable;
}
writel_relaxed(priv->ccr_bak, priv->common.base + priv->cfg->regs->ccr);
@@ -556,8 +552,7 @@ static int stm32_adc_core_hw_start(struct device *dev)
return 0;
err_bclk_disable:
- if (priv->bclk)
- clk_disable_unprepare(priv->bclk);
+ clk_disable_unprepare(priv->bclk);
err_regulator_disable:
regulator_disable(priv->vref);
err_switches_dis:
@@ -575,10 +570,8 @@ static void stm32_adc_core_hw_stop(struct device *dev)
/* Backup CCR that may be lost (depends on power state to achieve) */
priv->ccr_bak = readl_relaxed(priv->common.base + priv->cfg->regs->ccr);
- if (priv->aclk)
- clk_disable_unprepare(priv->aclk);
- if (priv->bclk)
- clk_disable_unprepare(priv->bclk);
+ clk_disable_unprepare(priv->aclk);
+ clk_disable_unprepare(priv->bclk);
regulator_disable(priv->vref);
stm32_adc_core_switches_supply_dis(priv);
regulator_disable(priv->vdda);
diff --git a/drivers/iio/adc/stm32-adc.c b/drivers/iio/adc/stm32-adc.c
index c067c994dae2..f7c53cea509a 100644
--- a/drivers/iio/adc/stm32-adc.c
+++ b/drivers/iio/adc/stm32-adc.c
@@ -546,8 +546,7 @@ static int stm32_adc_hw_stop(struct device *dev)
if (adc->cfg->unprepare)
adc->cfg->unprepare(indio_dev);
- if (adc->clk)
- clk_disable_unprepare(adc->clk);
+ clk_disable_unprepare(adc->clk);
return 0;
}
@@ -558,11 +557,9 @@ static int stm32_adc_hw_start(struct device *dev)
struct stm32_adc *adc = iio_priv(indio_dev);
int ret;
- if (adc->clk) {
- ret = clk_prepare_enable(adc->clk);
- if (ret)
- return ret;
- }
+ ret = clk_prepare_enable(adc->clk);
+ if (ret)
+ return ret;
stm32_adc_set_res(adc);
@@ -575,8 +572,7 @@ static int stm32_adc_hw_start(struct device *dev)
return 0;
err_clk_dis:
- if (adc->clk)
- clk_disable_unprepare(adc->clk);
+ clk_disable_unprepare(adc->clk);
return ret;
}
--
2.17.1
next reply other threads:[~2020-12-18 9:36 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-12-18 9:35 Xu Wang [this message]
2020-12-18 14:32 ` [PATCH] iio: adc: stm32-adc: Remove redundant null check before clk_prepare_enable/clk_disable_unprepare Fabrice Gasnier
2020-12-29 17:14 ` Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201218093512.871-1-vulab@iscas.ac.cn \
--to=vulab@iscas.ac.cn \
--cc=alexandre.torgue@st.com \
--cc=alexandru.ardelean@analog.com \
--cc=andy.shevchenko@gmail.com \
--cc=etienne.carriere@st.com \
--cc=fabrice.gasnier@st.com \
--cc=jic23@kernel.org \
--cc=krzk@kernel.org \
--cc=lars@metafoo.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=mcoquelin.stm32@gmail.com \
--cc=olivier.moysan@st.com \
--cc=peter.ujfalusi@ti.com \
--cc=pmeerw@pmeerw.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox