From: Jagan Teki <jagan@amarulasolutions.com>
To: Rob Herring <robh+dt@kernel.org>, Shawn Guo <shawnguo@kernel.org>,
Li Yang <leoyang.li@nxp.com>, Fabio Estevam <festevam@gmail.com>,
Krzysztof Kozlowski <krzk@kernel.org>
Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
NXP Linux Team <linux-imx@nxp.com>,
linux-amarula@amarulasolutions.com,
Jagan Teki <jagan@amarulasolutions.com>,
Catalin Marinas <catalin.marinas@arm.com>,
Will Deacon <will@kernel.org>,
Matteo Lisi <matteo.lisi@engicam.com>
Subject: [PATCH v2 4/6] arm64: dts: imx8mm: Add Engicam i.Core MX8M Mini C.TOUCH 2.0
Date: Mon, 21 Dec 2020 17:01:49 +0530 [thread overview]
Message-ID: <20201221113151.94515-5-jagan@amarulasolutions.com> (raw)
In-Reply-To: <20201221113151.94515-1-jagan@amarulasolutions.com>
Engicam C.TOUCH 2.0 is an EDIMM compliant general purpose Carrier
board.
Genaral features:
- Ethernet 10/100
- Wifi/BT
- USB Type A/OTG
- Audio Out
- CAN
- LVDS panel connector
i.Core MX8M Mini is an EDIMM SoM based on NXP i.MX8M Mini from Engicam.
i.Core MX8M Mini needs to mount on top of this Carrier board for
creating complete i.Core MX8M Mini C.TOUCH 2.0 board.
Add support for it.
Signed-off-by: Matteo Lisi <matteo.lisi@engicam.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
Changes for v2:
- enabled fec1 node
- updated commit message
- dropped engicam from filename since it aligned with imx6 engicam
dts files naming conventions.
- add i2c nodes
- fixed v1 comments
arch/arm64/boot/dts/freescale/Makefile | 1 +
.../dts/freescale/imx8mm-engicam-common.dtsi | 82 +++++++++++++++++++
.../dts/freescale/imx8mm-engicam-ctouch2.dtsi | 7 ++
.../freescale/imx8mm-icore-mx8mm-ctouch2.dts | 21 +++++
4 files changed, 111 insertions(+)
create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-engicam-common.dtsi
create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-engicam-ctouch2.dtsi
create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-icore-mx8mm-ctouch2.dts
diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index 6f0777ee6cd6..8d49a2c74604 100644
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -32,6 +32,7 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2162a-qds.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mm-beacon-kit.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mm-evk.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mm-ddr4-evk.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-icore-mx8mm-ctouch2.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mm-kontron-n801x-s.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mm-var-som-symphony.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mn-evk.dtb
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-engicam-common.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-engicam-common.dtsi
new file mode 100644
index 000000000000..f7870efd9dab
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-engicam-common.dtsi
@@ -0,0 +1,82 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Engicam srl
+ * Copyright (c) 2020 Amarula Solutions(India)
+ */
+
+&fec1 {
+ status = "okay";
+};
+
+&i2c2 {
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ status = "okay";
+};
+
+&i2c4 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c4>;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL 0x400001c3
+ MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA 0x400001c3
+ >;
+ };
+
+ pinctrl_i2c4: i2c4grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL 0x400001c3
+ MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA 0x400001c3
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX 0x140
+ MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX 0x140
+ >;
+ };
+
+ pinctrl_usdhc1_gpio: usdhc1gpiogrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_GPIO1_IO06_GPIO1_IO6 0x41
+ >;
+ };
+
+ pinctrl_usdhc1: usdhc1grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x190
+ MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d0
+ MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x1d0
+ MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x1d0
+ MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x1d0
+ MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d0
+ >;
+ };
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ status = "okay";
+};
+
+/* SD */
+&usdhc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc1>, <&pinctrl_usdhc1_gpio>;
+ cd-gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+ max-frequency = <50000000>;
+ bus-width = <4>;
+ no-1-8-v;
+ pm-ignore-notify;
+ keep-power-in-suspend;
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-engicam-ctouch2.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-engicam-ctouch2.dtsi
new file mode 100644
index 000000000000..294df07289a2
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-engicam-ctouch2.dtsi
@@ -0,0 +1,7 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Engicam srl
+ * Copyright (c) 2020 Amarula Solutions(India)
+ */
+
+#include "imx8mm-engicam-common.dtsi"
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-icore-mx8mm-ctouch2.dts b/arch/arm64/boot/dts/freescale/imx8mm-icore-mx8mm-ctouch2.dts
new file mode 100644
index 000000000000..8eb01b1f882a
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-icore-mx8mm-ctouch2.dts
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 NXP
+ * Copyright (c) 2019 Engicam srl
+ * Copyright (c) 2020 Amarula Solutions(India)
+ */
+
+/dts-v1/;
+#include "imx8mm.dtsi"
+#include "imx8mm-engicam-ctouch2.dtsi"
+#include "imx8mm-icore-mx8mm.dtsi"
+
+/ {
+ model = "Engicam i.Core MX8M Mini C.TOUCH 2.0";
+ compatible = "engicam,icore-mx8mm-ctouch2", "engicam,icore-mx8mm",
+ "fsl,imx8mm";
+
+ chosen {
+ stdout-path = &uart2;
+ };
+};
--
2.25.1
next prev parent reply other threads:[~2020-12-21 11:33 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-12-21 11:31 [PATCH v2 0/6] arm64: dts: imx8mm: Add Engicam i.Core MX8M Mini Jagan Teki
2020-12-21 11:31 ` [PATCH v2 1/6] arm64: defconfig: Enable REGULATOR_PF8X00 Jagan Teki
2020-12-21 13:42 ` Krzysztof Kozlowski
2020-12-21 11:31 ` [PATCH v2 2/6] dt-bindings: arm: fsl: Add Engicam i.Core MX8M Mini C.TOUCH 2.0 Jagan Teki
2020-12-21 13:46 ` Krzysztof Kozlowski
2020-12-21 13:59 ` Jagan Teki
2020-12-21 14:05 ` Krzysztof Kozlowski
2020-12-21 14:39 ` Jagan Teki
2020-12-21 14:42 ` Krzysztof Kozlowski
2020-12-21 14:47 ` Jagan Teki
2020-12-22 18:28 ` Jagan Teki
2020-12-22 20:25 ` Krzysztof Kozlowski
2020-12-22 20:32 ` Krzysztof Kozlowski
2020-12-21 11:31 ` [PATCH v2 3/6] arm64: dts: imx8mm: Add Engicam i.Core MX8M Mini SoM Jagan Teki
2020-12-21 13:52 ` Krzysztof Kozlowski
2020-12-21 11:31 ` Jagan Teki [this message]
2020-12-21 14:01 ` [PATCH v2 4/6] arm64: dts: imx8mm: Add Engicam i.Core MX8M Mini C.TOUCH 2.0 Krzysztof Kozlowski
2020-12-21 11:31 ` [PATCH v2 5/6] dt-bindings: arm: fsl: Add Engicam i.Core MX8M Mini EDIMM2.2 Starter Kit Jagan Teki
2020-12-21 11:31 ` [PATCH v2 6/6] arm64: dts: imx8mm: " Jagan Teki
2020-12-21 14:06 ` Krzysztof Kozlowski
2020-12-21 19:33 ` Jagan Teki
2020-12-21 21:06 ` Krzysztof Kozlowski
2020-12-22 8:50 ` Jagan Teki
2020-12-22 8:53 ` Krzysztof Kozlowski
2020-12-22 9:05 ` Jagan Teki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201221113151.94515-5-jagan@amarulasolutions.com \
--to=jagan@amarulasolutions.com \
--cc=catalin.marinas@arm.com \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=krzk@kernel.org \
--cc=leoyang.li@nxp.com \
--cc=linux-amarula@amarulasolutions.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=matteo.lisi@engicam.com \
--cc=robh+dt@kernel.org \
--cc=shawnguo@kernel.org \
--cc=will@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox