public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Krzysztof Kozlowski <krzk@kernel.org>
To: Timon Baetz <timon.baetz@protonmail.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>,
	Liam Girdwood <lgirdwood@gmail.com>,
	Mark Brown <broonie@kernel.org>, Rob Herring <robh+dt@kernel.org>,
	MyungJoo Ham <myungjoo.ham@samsung.com>,
	Chanwoo Choi <cw00.choi@samsung.com>,
	Lee Jones <lee.jones@linaro.org>,
	Sebastian Reichel <sre@kernel.org>,
	linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-samsung-soc@vger.kernel.org, linux-pm@vger.kernel.org,
	~postmarketos/upstreaming@lists.sr.ht
Subject: Re: [PATCH v5 3/8] power: supply: max8997_charger: Set CHARGER current limit
Date: Wed, 30 Dec 2020 09:53:27 +0100	[thread overview]
Message-ID: <20201230085327.GB9214@kozik-lap> (raw)
In-Reply-To: <20201228113507.1292506-3-timon.baetz@protonmail.com>

On Mon, Dec 28, 2020 at 11:36:02AM +0000, Timon Baetz wrote:
> Register for extcon notification and set charging current depending on
> the detected cable type. Current values are taken from vendor kernel,
> where most charger types end up setting 650mA [0].
> 
> Also enable and disable the CHARGER regulator based on extcon events.
> 
> [0] https://github.com/krzk/linux-vendor-backup/blob/samsung/galaxy-s2-epic-4g-touch-sph-d710-exynos4210-dump/drivers/misc/max8997-muic.c#L1675-L1678
> 
> Signed-off-by: Timon Baetz <timon.baetz@protonmail.com>
> ---
>  drivers/power/supply/max8997_charger.c | 96 ++++++++++++++++++++++++++
>  1 file changed, 96 insertions(+)
> 
> diff --git a/drivers/power/supply/max8997_charger.c b/drivers/power/supply/max8997_charger.c
> index 1947af25879a..f0f725385dfc 100644
> --- a/drivers/power/supply/max8997_charger.c
> +++ b/drivers/power/supply/max8997_charger.c
> @@ -6,12 +6,14 @@
>  //  MyungJoo Ham <myungjoo.ham@samsung.com>
>  
>  #include <linux/err.h>
> +#include <linux/extcon.h>
>  #include <linux/module.h>
>  #include <linux/slab.h>
>  #include <linux/platform_device.h>
>  #include <linux/power_supply.h>
>  #include <linux/mfd/max8997.h>
>  #include <linux/mfd/max8997-private.h>
> +#include <linux/regulator/consumer.h>
>  
>  /* MAX8997_REG_STATUS4 */
>  #define DCINOK_SHIFT		1
> @@ -31,6 +33,10 @@ struct charger_data {
>  	struct device *dev;
>  	struct max8997_dev *iodev;
>  	struct power_supply *battery;
> +	struct regulator *reg;
> +	struct extcon_dev *edev;
> +	struct notifier_block extcon_nb;
> +	struct work_struct extcon_work;
>  };
>  
>  static enum power_supply_property max8997_battery_props[] = {
> @@ -88,6 +94,67 @@ static int max8997_battery_get_property(struct power_supply *psy,
>  	return 0;
>  }
>  
> +static void max8997_battery_extcon_evt_stop_work(void *data)
> +{
> +	struct charger_data *charger = data;
> +
> +	cancel_work_sync(&charger->extcon_work);
> +}
> +
> +static void max8997_battery_extcon_evt_worker(struct work_struct *work)
> +{
> +	struct charger_data *charger =
> +	    container_of(work, struct charger_data, extcon_work);
> +	struct extcon_dev *edev = charger->edev;
> +	int current_limit;
> +
> +	if (extcon_get_state(edev, EXTCON_CHG_USB_SDP) > 0) {
> +		dev_dbg(charger->dev, "USB SDP charger is connected\n");
> +		current_limit = 450000;
> +	} else if (extcon_get_state(edev, EXTCON_CHG_USB_DCP) > 0) {
> +		dev_dbg(charger->dev, "USB DCP charger is connected\n");
> +		current_limit = 650000;
> +	} else if (extcon_get_state(edev, EXTCON_CHG_USB_FAST) > 0) {
> +		dev_dbg(charger->dev, "USB FAST charger is connected\n");
> +		current_limit = 650000;
> +	} else if (extcon_get_state(edev, EXTCON_CHG_USB_SLOW) > 0) {
> +		dev_dbg(charger->dev, "USB SLOW charger is connected\n");
> +		current_limit = 650000;
> +	} else if (extcon_get_state(edev, EXTCON_CHG_USB_CDP) > 0) {
> +		dev_dbg(charger->dev, "USB CDP charger is connected\n");
> +		current_limit = 650000;
> +	} else {
> +		dev_dbg(charger->dev, "USB charger is diconnected\n");
> +		current_limit = -1;
> +	}
> +
> +	if (current_limit > 0) {
> +		int ret = regulator_set_current_limit(charger->reg, current_limit, current_limit);
> +
> +		if (ret) {
> +			dev_err(charger->dev, "failed to set current limit: %d\n", ret);
> +			return;
> +		}
> +		ret = regulator_enable(charger->reg);
> +		if (ret)
> +			dev_err(charger->dev, "failed to enable regulator: %d\n", ret);
> +	} else {
> +		int ret  = regulator_disable(charger->reg);
> +
> +		if (ret)
> +			dev_err(charger->dev, "failed to disable regulator: %d\n", ret);
> +	}
> +}
> +
> +static int max8997_battery_extcon_evt(struct notifier_block *nb,
> +				unsigned long event, void *param)
> +{
> +	struct charger_data *charger =
> +		container_of(nb, struct charger_data, extcon_nb);
> +	schedule_work(&charger->extcon_work);
> +	return NOTIFY_OK;
> +}
> +
>  static const struct power_supply_desc max8997_battery_desc = {
>  	.name		= "max8997_pmic",
>  	.type		= POWER_SUPPLY_TYPE_BATTERY,
> @@ -170,6 +237,35 @@ static int max8997_battery_probe(struct platform_device *pdev)
>  		return PTR_ERR(charger->battery);
>  	}
>  
> +	charger->reg = devm_regulator_get_optional(&pdev->dev, "charger");
> +	if (IS_ERR(charger->reg)) {
> +		if (PTR_ERR(charger->reg) == -EPROBE_DEFER)
> +			return -EPROBE_DEFER;
> +		dev_err(&pdev->dev, "couldn't get charger regulator\n");

This should be dev_info, as we discussed. Otherwise it will scream on
every boot with a DTS which does not have charger node.

Best regards,
Krzysztof

  reply	other threads:[~2020-12-30  8:54 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-12-28 11:35 [PATCH v5 1/8] extcon: max8997: Add CHGINS and CHGRM interrupt handling Timon Baetz
2020-12-28 11:35 ` [PATCH v5 2/8] regulator: dt-bindings: Document max8997-pmic nodes Timon Baetz
2020-12-28 11:36 ` [PATCH v5 3/8] power: supply: max8997_charger: Set CHARGER current limit Timon Baetz
2020-12-30  8:53   ` Krzysztof Kozlowski [this message]
2020-12-28 11:36 ` [PATCH v5 4/8] ARM: dts: exynos: Add muic and charger nodes for I9100 Timon Baetz
2020-12-28 11:36 ` [PATCH v5 5/8] ARM: dts: exynos: Add muic and charger nodes for Origen Timon Baetz
2020-12-28 11:36 ` [PATCH v5 6/8] ARM: dts: exynos: Add muic and charger nodes for Trats Timon Baetz
2020-12-28 11:36 ` [PATCH v5 7/8] ARM: dts: exynos: Fix charging regulator voltage and current for I9100 Timon Baetz
2020-12-28 11:36 ` [PATCH v5 8/8] ARM: dts: exynos: Add top-off charging regulator node " Timon Baetz
2020-12-30  8:56 ` [PATCH v5 1/8] extcon: max8997: Add CHGINS and CHGRM interrupt handling Krzysztof Kozlowski

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201230085327.GB9214@kozik-lap \
    --to=krzk@kernel.org \
    --cc=broonie@kernel.org \
    --cc=cw00.choi@samsung.com \
    --cc=devicetree@vger.kernel.org \
    --cc=lee.jones@linaro.org \
    --cc=lgirdwood@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=linux-samsung-soc@vger.kernel.org \
    --cc=m.szyprowski@samsung.com \
    --cc=myungjoo.ham@samsung.com \
    --cc=robh+dt@kernel.org \
    --cc=sre@kernel.org \
    --cc=timon.baetz@protonmail.com \
    --cc=~postmarketos/upstreaming@lists.sr.ht \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox