public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	stable@vger.kernel.org, Samuel Holland <samuel@sholland.org>,
	"David S. Miller" <davem@davemloft.net>
Subject: [PATCH 4.19 04/43] net: stmmac: dwmac-sun8i: Balance internal PHY power
Date: Fri, 15 Jan 2021 13:27:34 +0100	[thread overview]
Message-ID: <20210115121957.263251610@linuxfoundation.org> (raw)
In-Reply-To: <20210115121957.037407908@linuxfoundation.org>

From: Samuel Holland <samuel@sholland.org>

[ Upstream commit b8239638853e3e37b287e4bd4d57b41f14c78550 ]

sun8i_dwmac_exit calls sun8i_dwmac_unpower_internal_phy, but
sun8i_dwmac_init did not call sun8i_dwmac_power_internal_phy. This
caused PHY power to remain off after a suspend/resume cycle. Fix this by
recording if PHY power should be restored, and if so, restoring it.

Fixes: 634db83b8265 ("net: stmmac: dwmac-sun8i: Handle integrated/external MDIOs")
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c |   31 ++++++++++++++++------
 1 file changed, 23 insertions(+), 8 deletions(-)

--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
@@ -73,6 +73,7 @@ struct emac_variant {
  * @variant:	reference to the current board variant
  * @regmap:	regmap for using the syscon
  * @internal_phy_powered: Does the internal PHY is enabled
+ * @use_internal_phy: Is the internal PHY selected for use
  * @mux_handle:	Internal pointer used by mdio-mux lib
  */
 struct sunxi_priv_data {
@@ -83,6 +84,7 @@ struct sunxi_priv_data {
 	const struct emac_variant *variant;
 	struct regmap_field *regmap_field;
 	bool internal_phy_powered;
+	bool use_internal_phy;
 	void *mux_handle;
 };
 
@@ -518,8 +520,11 @@ static const struct stmmac_dma_ops sun8i
 	.dma_interrupt = sun8i_dwmac_dma_interrupt,
 };
 
+static int sun8i_dwmac_power_internal_phy(struct stmmac_priv *priv);
+
 static int sun8i_dwmac_init(struct platform_device *pdev, void *priv)
 {
+	struct net_device *ndev = platform_get_drvdata(pdev);
 	struct sunxi_priv_data *gmac = priv;
 	int ret;
 
@@ -533,13 +538,25 @@ static int sun8i_dwmac_init(struct platf
 
 	ret = clk_prepare_enable(gmac->tx_clk);
 	if (ret) {
-		if (gmac->regulator)
-			regulator_disable(gmac->regulator);
 		dev_err(&pdev->dev, "Could not enable AHB clock\n");
-		return ret;
+		goto err_disable_regulator;
+	}
+
+	if (gmac->use_internal_phy) {
+		ret = sun8i_dwmac_power_internal_phy(netdev_priv(ndev));
+		if (ret)
+			goto err_disable_clk;
 	}
 
 	return 0;
+
+err_disable_clk:
+	clk_disable_unprepare(gmac->tx_clk);
+err_disable_regulator:
+	if (gmac->regulator)
+		regulator_disable(gmac->regulator);
+
+	return ret;
 }
 
 static void sun8i_dwmac_core_init(struct mac_device_info *hw,
@@ -809,7 +826,6 @@ static int mdio_mux_syscon_switch_fn(int
 	struct sunxi_priv_data *gmac = priv->plat->bsp_priv;
 	u32 reg, val;
 	int ret = 0;
-	bool need_power_ephy = false;
 
 	if (current_child ^ desired_child) {
 		regmap_field_read(gmac->regmap_field, &reg);
@@ -817,13 +833,12 @@ static int mdio_mux_syscon_switch_fn(int
 		case DWMAC_SUN8I_MDIO_MUX_INTERNAL_ID:
 			dev_info(priv->device, "Switch mux to internal PHY");
 			val = (reg & ~H3_EPHY_MUX_MASK) | H3_EPHY_SELECT;
-
-			need_power_ephy = true;
+			gmac->use_internal_phy = true;
 			break;
 		case DWMAC_SUN8I_MDIO_MUX_EXTERNAL_ID:
 			dev_info(priv->device, "Switch mux to external PHY");
 			val = (reg & ~H3_EPHY_MUX_MASK) | H3_EPHY_SHUTDOWN;
-			need_power_ephy = false;
+			gmac->use_internal_phy = false;
 			break;
 		default:
 			dev_err(priv->device, "Invalid child ID %x\n",
@@ -831,7 +846,7 @@ static int mdio_mux_syscon_switch_fn(int
 			return -EINVAL;
 		}
 		regmap_field_write(gmac->regmap_field, val);
-		if (need_power_ephy) {
+		if (gmac->use_internal_phy) {
 			ret = sun8i_dwmac_power_internal_phy(priv);
 			if (ret)
 				return ret;



  parent reply	other threads:[~2021-01-15 13:02 UTC|newest]

Thread overview: 48+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-01-15 12:27 [PATCH 4.19 00/43] 4.19.168-rc1 review Greg Kroah-Hartman
2021-01-15 12:27 ` [PATCH 4.19 01/43] net: cdc_ncm: correct overhead in delayed_ndp_size Greg Kroah-Hartman
2021-01-15 12:27 ` [PATCH 4.19 02/43] net: hns3: fix the number of queues actually used by ARQ Greg Kroah-Hartman
2021-01-15 12:27 ` [PATCH 4.19 03/43] net: stmmac: dwmac-sun8i: Balance internal PHY resource references Greg Kroah-Hartman
2021-01-15 12:27 ` Greg Kroah-Hartman [this message]
2021-01-15 12:27 ` [PATCH 4.19 05/43] net: vlan: avoid leaks on register_vlan_dev() failures Greg Kroah-Hartman
2021-01-15 12:27 ` [PATCH 4.19 06/43] net/sonic: Fix some resource leaks in error handling paths Greg Kroah-Hartman
2021-01-15 12:27 ` [PATCH 4.19 07/43] net: ip: always refragment ip defragmented packets Greg Kroah-Hartman
2021-01-15 12:27 ` [PATCH 4.19 08/43] net: fix pmtu check in nopmtudisc mode Greg Kroah-Hartman
2021-01-15 12:27 ` [PATCH 4.19 09/43] net: ipv6: fib: flush exceptions when purging route Greg Kroah-Hartman
2021-01-15 12:27 ` [PATCH 4.19 10/43] chtls: Fix hardware tid leak Greg Kroah-Hartman
2021-01-15 12:27 ` [PATCH 4.19 11/43] chtls: Remove invalid set_tcb call Greg Kroah-Hartman
2021-01-15 12:27 ` [PATCH 4.19 12/43] chtls: Fix panic when route to peer not configured Greg Kroah-Hartman
2021-01-15 12:27 ` [PATCH 4.19 13/43] chtls: Replace skb_dequeue with skb_peek Greg Kroah-Hartman
2021-01-15 12:27 ` [PATCH 4.19 14/43] chtls: Added a check to avoid NULL pointer dereference Greg Kroah-Hartman
2021-01-15 12:27 ` [PATCH 4.19 15/43] chtls: Fix chtls resources release sequence Greg Kroah-Hartman
2021-01-15 12:27 ` [PATCH 4.19 16/43] x86/resctrl: Use an IPI instead of task_work_add() to update PQR_ASSOC MSR Greg Kroah-Hartman
2021-01-15 12:27 ` [PATCH 4.19 17/43] x86/resctrl: Dont move a task to the same resource group Greg Kroah-Hartman
2021-01-15 12:27 ` [PATCH 4.19 18/43] vmlinux.lds.h: Add PGO and AutoFDO input sections Greg Kroah-Hartman
2021-01-15 12:27 ` [PATCH 4.19 19/43] drm/i915: Fix mismatch between misplaced vma check and vma insert Greg Kroah-Hartman
2021-01-15 12:27 ` [PATCH 4.19 20/43] spi: pxa2xx: Fix use-after-free on unbind Greg Kroah-Hartman
2021-01-15 12:27 ` [PATCH 4.19 21/43] iio: imu: st_lsm6dsx: flip irq return logic Greg Kroah-Hartman
2021-01-15 12:27 ` [PATCH 4.19 22/43] iio: imu: st_lsm6dsx: fix edge-trigger interrupts Greg Kroah-Hartman
2021-01-15 12:27 ` [PATCH 4.19 23/43] HID: wacom: Fix memory leakage caused by kfifo_alloc Greg Kroah-Hartman
2021-01-15 12:27 ` [PATCH 4.19 24/43] ARM: OMAP2+: omap_device: fix idling of devices during probe Greg Kroah-Hartman
2021-01-15 12:27 ` [PATCH 4.19 25/43] i2c: sprd: use a specific timeout to avoid system hang up issue Greg Kroah-Hartman
2021-01-15 12:27 ` [PATCH 4.19 26/43] cpufreq: powernow-k8: pass policy rather than use cpufreq_cpu_get() Greg Kroah-Hartman
2021-01-15 12:27 ` [PATCH 4.19 27/43] spi: stm32: FIFO threshold level - fix align packet size Greg Kroah-Hartman
2021-01-15 12:27 ` [PATCH 4.19 28/43] dmaengine: mediatek: mtk-hsdma: Fix a resource leak in the error handling path of the probe function Greg Kroah-Hartman
2021-01-15 12:27 ` [PATCH 4.19 29/43] dmaengine: xilinx_dma: check dma_async_device_register return value Greg Kroah-Hartman
2021-01-15 12:28 ` [PATCH 4.19 30/43] dmaengine: xilinx_dma: fix incompatible param warning in _child_probe() Greg Kroah-Hartman
2021-01-15 12:28 ` [PATCH 4.19 31/43] dmaengine: xilinx_dma: fix mixed_enum_type coverity warning Greg Kroah-Hartman
2021-01-15 12:28 ` [PATCH 4.19 32/43] wil6210: select CONFIG_CRC32 Greg Kroah-Hartman
2021-01-15 12:28 ` [PATCH 4.19 33/43] block: rsxx: " Greg Kroah-Hartman
2021-01-15 12:28 ` [PATCH 4.19 34/43] lightnvm: " Greg Kroah-Hartman
2021-01-15 12:28 ` [PATCH 4.19 35/43] iommu/intel: Fix memleak in intel_irq_remapping_alloc Greg Kroah-Hartman
2021-01-15 12:28 ` [PATCH 4.19 36/43] net/mlx5e: Fix memleak in mlx5e_create_l2_table_groups Greg Kroah-Hartman
2021-01-15 12:28 ` [PATCH 4.19 37/43] net/mlx5e: Fix two double free cases Greg Kroah-Hartman
2021-01-15 12:28 ` [PATCH 4.19 38/43] regmap: debugfs: Fix a memory leak when calling regmap_attach_dev Greg Kroah-Hartman
2021-01-15 12:28 ` [PATCH 4.19 39/43] wan: ds26522: select CONFIG_BITREVERSE Greg Kroah-Hartman
2021-01-15 12:28 ` [PATCH 4.19 40/43] KVM: arm64: Dont access PMCR_EL0 when no PMU is available Greg Kroah-Hartman
2021-01-15 12:28 ` [PATCH 4.19 41/43] block: fix use-after-free in disk_part_iter_next Greg Kroah-Hartman
2021-01-15 12:28 ` [PATCH 4.19 42/43] net: drop bogus skb with CHECKSUM_PARTIAL and offset beyond end of trimmed packet Greg Kroah-Hartman
2021-01-15 12:28 ` [PATCH 4.19 43/43] regmap: debugfs: Fix a reversed if statement in regmap_debugfs_init() Greg Kroah-Hartman
2021-01-15 21:14 ` [PATCH 4.19 00/43] 4.19.168-rc1 review Shuah Khan
2021-01-15 21:18 ` Guenter Roeck
2021-01-16  6:03 ` Naresh Kamboju
2021-01-16  7:58 ` Pavel Machek

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210115121957.263251610@linuxfoundation.org \
    --to=gregkh@linuxfoundation.org \
    --cc=davem@davemloft.net \
    --cc=linux-kernel@vger.kernel.org \
    --cc=samuel@sholland.org \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox