[PATCH] greybus: es2: drop short control-transfer checks

[PATCH] greybus: es2: drop short control-transfer checks

[Johan Hovold]

There's no need to check for short USB control transfers when sending
data using so remove the redundant sanity checks.

Signed-off-by: Johan Hovold <johan@kernel.org>
---
 drivers/greybus/es2.c | 9 ++-------
 1 file changed, 2 insertions(+), 7 deletions(-)

diff --git a/drivers/greybus/es2.c b/drivers/greybus/es2.c
index 1df6ab5d339d..48ad154df3a7 100644
--- a/drivers/greybus/es2.c
+++ b/drivers/greybus/es2.c
@@ -567,12 +567,9 @@ static int cport_enable(struct gb_host_device *hd, u16 cport_id,
 			      USB_DIR_OUT | USB_TYPE_VENDOR |
 			      USB_RECIP_INTERFACE, cport_id, 0,
 			      req, sizeof(*req), ES2_USB_CTRL_TIMEOUT);
-	if (ret != sizeof(*req)) {
+	if (ret < 0) {
 		dev_err(&udev->dev, "failed to set cport flags for port %d\n",
 			cport_id);
-		if (ret >= 0)
-			ret = -EIO;
-
 		goto out;
 	}
 
@@ -961,12 +958,10 @@ static int arpc_send(struct es2_ap_dev *es2, struct arpc *rpc, int timeout)
 				 0, 0,
 				 rpc->req, le16_to_cpu(rpc->req->size),
 				 ES2_USB_CTRL_TIMEOUT);
-	if (retval != le16_to_cpu(rpc->req->size)) {
+	if (retval < 0) {
 		dev_err(&udev->dev,
 			"failed to send ARPC request %d: %d\n",
 			rpc->req->type, retval);
-		if (retval > 0)
-			retval = -EIO;
 		return retval;
 	}
 
-- 
2.26.2

Re: [greybus-dev] [PATCH] greybus: es2: drop short control-transfer checks

[Viresh Kumar]

On 18-01-21, 15:46, Johan Hovold wrote:
> There's no need to check for short USB control transfers when sending
> data using so remove the redundant sanity checks.
> 
> Signed-off-by: Johan Hovold <johan@kernel.org>
> ---
>  drivers/greybus/es2.c | 9 ++-------
>  1 file changed, 2 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/greybus/es2.c b/drivers/greybus/es2.c
> index 1df6ab5d339d..48ad154df3a7 100644
> --- a/drivers/greybus/es2.c
> +++ b/drivers/greybus/es2.c
> @@ -567,12 +567,9 @@ static int cport_enable(struct gb_host_device *hd, u16 cport_id,
>  			      USB_DIR_OUT | USB_TYPE_VENDOR |
>  			      USB_RECIP_INTERFACE, cport_id, 0,
>  			      req, sizeof(*req), ES2_USB_CTRL_TIMEOUT);
> -	if (ret != sizeof(*req)) {
> +	if (ret < 0) {
>  		dev_err(&udev->dev, "failed to set cport flags for port %d\n",
>  			cport_id);
> -		if (ret >= 0)
> -			ret = -EIO;
> -
>  		goto out;
>  	}
>  
> @@ -961,12 +958,10 @@ static int arpc_send(struct es2_ap_dev *es2, struct arpc *rpc, int timeout)
>  				 0, 0,
>  				 rpc->req, le16_to_cpu(rpc->req->size),
>  				 ES2_USB_CTRL_TIMEOUT);
> -	if (retval != le16_to_cpu(rpc->req->size)) {
> +	if (retval < 0) {
>  		dev_err(&udev->dev,
>  			"failed to send ARPC request %d: %d\n",
>  			rpc->req->type, retval);
> -		if (retval > 0)
> -			retval = -EIO;
>  		return retval;
>  	}

Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>

-- 
viresh