public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: JC Kuo <jckuo@nvidia.com>
To: <gregkh@linuxfoundation.org>, <thierry.reding@gmail.com>,
	<robh@kernel.org>, <jonathanh@nvidia.com>, <kishon@ti.com>
Cc: <linux-tegra@vger.kernel.org>, <linux-usb@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>, <devicetree@vger.kernel.org>,
	<nkristam@nvidia.com>, JC Kuo <jckuo@nvidia.com>,
	Thierry Reding <treding@nvidia.com>
Subject: [PATCH v6 12/15] phy: tegra: xusb: Tegra210 host mode VBUS control
Date: Tue, 19 Jan 2021 16:55:43 +0800	[thread overview]
Message-ID: <20210119085546.725005-13-jckuo@nvidia.com> (raw)
In-Reply-To: <20210119085546.725005-1-jckuo@nvidia.com>

To support XUSB host controller ELPG, this commit moves VBUS control
.phy_power_on()/.phy_power_off() to .phy_init()/.phy_exit().
When XUSB host controller enters ELPG, host driver invokes
.phy_power_off(), VBUS should remain ON so that USB devices will not
disconnect. VBUS can be turned OFF when host driver invokes
.phy_exit() which indicates disabling a USB port.

Signed-off-by: JC Kuo <jckuo@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
---
v6:
   no change
v5:
   no change
v4:
   no change
v3:
   new, was a part of "phy: tegra: xusb: Add wake/sleepwalk for Tegra210"

 drivers/phy/tegra/xusb-tegra210.c | 52 ++++++++++++++++++++++++-------
 1 file changed, 40 insertions(+), 12 deletions(-)

diff --git a/drivers/phy/tegra/xusb-tegra210.c b/drivers/phy/tegra/xusb-tegra210.c
index 8af73ba78ad7..9d39f812fb43 100644
--- a/drivers/phy/tegra/xusb-tegra210.c
+++ b/drivers/phy/tegra/xusb-tegra210.c
@@ -1819,8 +1819,25 @@ static int tegra210_usb2_phy_init(struct phy *phy)
 {
 	struct tegra_xusb_lane *lane = phy_get_drvdata(phy);
 	struct tegra_xusb_padctl *padctl = lane->pad->padctl;
+	unsigned int index = lane->index;
+	struct tegra_xusb_usb2_port *port;
+	int err;
 	u32 value;
 
+	port = tegra_xusb_find_usb2_port(padctl, index);
+	if (!port) {
+		dev_err(&phy->dev, "no port found for USB2 lane %u\n", index);
+		return -ENODEV;
+	}
+
+	if (port->supply && port->mode == USB_DR_MODE_HOST) {
+		err = regulator_enable(port->supply);
+		if (err)
+			return err;
+	}
+
+	mutex_lock(&padctl->lock);
+
 	value = padctl_readl(padctl, XUSB_PADCTL_USB2_PAD_MUX);
 	value &= ~(XUSB_PADCTL_USB2_PAD_MUX_USB2_BIAS_PAD_MASK <<
 		   XUSB_PADCTL_USB2_PAD_MUX_USB2_BIAS_PAD_SHIFT);
@@ -1828,11 +1845,30 @@ static int tegra210_usb2_phy_init(struct phy *phy)
 		 XUSB_PADCTL_USB2_PAD_MUX_USB2_BIAS_PAD_SHIFT;
 	padctl_writel(padctl, value, XUSB_PADCTL_USB2_PAD_MUX);
 
+	mutex_unlock(&padctl->lock);
+
 	return 0;
 }
 
 static int tegra210_usb2_phy_exit(struct phy *phy)
 {
+	struct tegra_xusb_lane *lane = phy_get_drvdata(phy);
+	struct tegra_xusb_padctl *padctl = lane->pad->padctl;
+	struct tegra_xusb_usb2_port *port;
+	int err;
+
+	port = tegra_xusb_find_usb2_port(padctl, lane->index);
+	if (!port) {
+		dev_err(&phy->dev, "no port found for USB2 lane %u\n", lane->index);
+		return -ENODEV;
+	}
+
+	if (port->supply && port->mode == USB_DR_MODE_HOST) {
+		err = regulator_disable(port->supply);
+		if (err)
+			return err;
+	}
+
 	return 0;
 }
 
@@ -1953,6 +1989,8 @@ static int tegra210_usb2_phy_power_on(struct phy *phy)
 
 	priv = to_tegra210_xusb_padctl(padctl);
 
+	mutex_lock(&padctl->lock);
+
 	if (port->usb3_port_fake != -1) {
 		value = padctl_readl(padctl, XUSB_PADCTL_SS_PORT_MAP);
 		value &= ~XUSB_PADCTL_SS_PORT_MAP_PORTX_MAP_MASK(
@@ -2046,14 +2084,6 @@ static int tegra210_usb2_phy_power_on(struct phy *phy)
 	padctl_writel(padctl, value,
 		      XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPADX_CTL1(index));
 
-	if (port->supply && port->mode == USB_DR_MODE_HOST) {
-		err = regulator_enable(port->supply);
-		if (err)
-			return err;
-	}
-
-	mutex_lock(&padctl->lock);
-
 	if (pad->enable > 0) {
 		pad->enable++;
 		mutex_unlock(&padctl->lock);
@@ -2062,7 +2092,7 @@ static int tegra210_usb2_phy_power_on(struct phy *phy)
 
 	err = clk_prepare_enable(pad->clk);
 	if (err)
-		goto disable_regulator;
+		goto out;
 
 	value = padctl_readl(padctl, XUSB_PADCTL_USB2_BIAS_PAD_CTL1);
 	value &= ~((XUSB_PADCTL_USB2_BIAS_PAD_CTL1_TRK_START_TIMER_MASK <<
@@ -2094,8 +2124,7 @@ static int tegra210_usb2_phy_power_on(struct phy *phy)
 
 	return 0;
 
-disable_regulator:
-	regulator_disable(port->supply);
+out:
 	mutex_unlock(&padctl->lock);
 	return err;
 }
@@ -2154,7 +2183,6 @@ static int tegra210_usb2_phy_power_off(struct phy *phy)
 	padctl_writel(padctl, value, XUSB_PADCTL_USB2_BIAS_PAD_CTL0);
 
 out:
-	regulator_disable(port->supply);
 	mutex_unlock(&padctl->lock);
 	return 0;
 }
-- 
2.25.1


  parent reply	other threads:[~2021-01-19  8:59 UTC|newest]

Thread overview: 28+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-01-19  8:55 [PATCH v6 00/15] Tegra XHCI controller ELPG support JC Kuo
2021-01-19  8:55 ` [PATCH v6 01/15] clk: tegra: Add PLLE HW power sequencer control JC Kuo
2021-01-19 14:11   ` Thierry Reding
2021-02-11  3:06   ` Stephen Boyd
2021-01-19  8:55 ` [PATCH v6 02/15] clk: tegra: Don't enable PLLE HW sequencer at init JC Kuo
2021-01-19 14:12   ` Thierry Reding
2021-02-11  3:06   ` Stephen Boyd
2021-01-19  8:55 ` [PATCH v6 03/15] phy: tegra: xusb: Move usb3 port init for Tegra210 JC Kuo
2021-01-19  8:55 ` [PATCH v6 04/15] phy: tegra: xusb: tegra210: Do not reset UPHY PLL JC Kuo
2021-01-19 13:52   ` Thierry Reding
2021-01-20  1:42     ` JC Kuo
2021-01-19  8:55 ` [PATCH v6 05/15] phy: tegra: xusb: Rearrange UPHY init on Tegra210 JC Kuo
2021-01-19  8:55 ` [PATCH v6 06/15] phy: tegra: xusb: Add Tegra210 lane_iddq operation JC Kuo
2021-01-19  8:55 ` [PATCH v6 07/15] phy: tegra: xusb: Add sleepwalk and suspend/resume JC Kuo
2021-01-19 13:54   ` Thierry Reding
2021-01-19  8:55 ` [PATCH v6 08/15] soc/tegra: pmc: Provide USB sleepwalk register map JC Kuo
2021-01-19  8:55 ` [PATCH v6 09/15] arm64: tegra210: XUSB PADCTL add "nvidia,pmc" prop JC Kuo
2021-01-19  8:55 ` [PATCH v6 10/15] dt-bindings: phy: tegra-xusb: Add nvidia,pmc prop JC Kuo
2021-01-19  8:55 ` [PATCH v6 11/15] phy: tegra: xusb: Add wake/sleepwalk for Tegra210 JC Kuo
2021-01-19 13:58   ` Thierry Reding
2021-01-19  8:55 ` JC Kuo [this message]
2021-01-19  8:55 ` [PATCH v6 13/15] phy: tegra: xusb: Add wake/sleepwalk for Tegra186 JC Kuo
2021-01-19 13:59   ` Thierry Reding
2021-01-19  8:55 ` [PATCH v6 14/15] usb: host: xhci-tegra: Unlink power domain devices JC Kuo
2021-01-19 14:04   ` Thierry Reding
2021-01-19  8:55 ` [PATCH v6 15/15] xhci: tegra: Enable ELPG for runtime/system PM JC Kuo
2021-01-19 14:04   ` Thierry Reding
2021-01-19 14:07 ` [PATCH v6 00/15] Tegra XHCI controller ELPG support Thierry Reding

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210119085546.725005-13-jckuo@nvidia.com \
    --to=jckuo@nvidia.com \
    --cc=devicetree@vger.kernel.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=jonathanh@nvidia.com \
    --cc=kishon@ti.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-tegra@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=nkristam@nvidia.com \
    --cc=robh@kernel.org \
    --cc=thierry.reding@gmail.com \
    --cc=treding@nvidia.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox