From: Guenter Roeck <linux@roeck-us.net>
To: angkery <angkery@163.com>
Cc: heikki.krogerus@linux.intel.com, gregkh@linuxfoundation.org,
linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org,
Junlin Yang <yangjunlin@yulong.com>
Subject: Re: [PATCH v3 2/2] usb: typec: tcpci_maxim: add terminating newlines to logging
Date: Sun, 24 Jan 2021 07:43:49 -0800 [thread overview]
Message-ID: <20210124154349.GC131753@roeck-us.net> (raw)
In-Reply-To: <20210124143947.1688-1-angkery@163.com>
On Sun, Jan 24, 2021 at 10:39:47PM +0800, angkery wrote:
> From: Junlin Yang <yangjunlin@yulong.com>
>
> Add terminating '\n' to the formats where missed.
>
> Signed-off-by: Junlin Yang <yangjunlin@yulong.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
> ---
> v3:Modify it again and submit it separately from patch 1.
>
> drivers/usb/typec/tcpm/tcpci_maxim.c | 12 ++++++------
> 1 file changed, 6 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/usb/typec/tcpm/tcpci_maxim.c b/drivers/usb/typec/tcpm/tcpci_maxim.c
> index 7f54f51a..5d7463c 100644
> --- a/drivers/usb/typec/tcpm/tcpci_maxim.c
> +++ b/drivers/usb/typec/tcpm/tcpci_maxim.c
> @@ -158,7 +158,7 @@ static void process_rx(struct max_tcpci_chip *chip, u16 status)
> */
> ret = regmap_raw_read(chip->data.regmap, TCPC_RX_BYTE_CNT, rx_buf, 2);
> if (ret < 0) {
> - dev_err(chip->dev, "TCPC_RX_BYTE_CNT read failed ret:%d", ret);
> + dev_err(chip->dev, "TCPC_RX_BYTE_CNT read failed ret:%d\n", ret);
> return;
> }
>
> @@ -167,13 +167,13 @@ static void process_rx(struct max_tcpci_chip *chip, u16 status)
>
> if (count == 0 || frame_type != TCPC_RX_BUF_FRAME_TYPE_SOP) {
> max_tcpci_write16(chip, TCPC_ALERT, TCPC_ALERT_RX_STATUS);
> - dev_err(chip->dev, "%s", count == 0 ? "error: count is 0" :
> + dev_err(chip->dev, "%s\n", count == 0 ? "error: count is 0" :
> "error frame_type is not SOP");
> return;
> }
>
> if (count > sizeof(struct pd_message) || count + 1 > TCPC_RECEIVE_BUFFER_LEN) {
> - dev_err(chip->dev, "Invalid TCPC_RX_BYTE_CNT %d", count);
> + dev_err(chip->dev, "Invalid TCPC_RX_BYTE_CNT %d\n", count);
> return;
> }
>
> @@ -184,7 +184,7 @@ static void process_rx(struct max_tcpci_chip *chip, u16 status)
> count += 1;
> ret = regmap_raw_read(chip->data.regmap, TCPC_RX_BYTE_CNT, rx_buf, count);
> if (ret < 0) {
> - dev_err(chip->dev, "Error: TCPC_RX_BYTE_CNT read failed: %d", ret);
> + dev_err(chip->dev, "Error: TCPC_RX_BYTE_CNT read failed: %d\n", ret);
> return;
> }
>
> @@ -317,7 +317,7 @@ static irqreturn_t _max_tcpci_irq(struct max_tcpci_chip *chip, u16 status)
> return ret;
>
> if (reg_status & TCPC_SINK_FAST_ROLE_SWAP) {
> - dev_info(chip->dev, "FRS Signal");
> + dev_info(chip->dev, "FRS Signal\n");
> tcpm_sink_frs(chip->port);
> }
> }
> @@ -460,7 +460,7 @@ static int max_tcpci_probe(struct i2c_client *client, const struct i2c_device_id
> max_tcpci_init_regs(chip);
> chip->tcpci = tcpci_register_port(chip->dev, &chip->data);
> if (IS_ERR(chip->tcpci)) {
> - dev_err(&client->dev, "TCPCI port registration failed");
> + dev_err(&client->dev, "TCPCI port registration failed\n");
> return PTR_ERR(chip->tcpci);
> }
> chip->port = tcpci_get_tcpm_port(chip->tcpci);
> --
> 1.9.1
>
next prev parent reply other threads:[~2021-01-24 15:44 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-01-24 14:39 [PATCH v3 2/2] usb: typec: tcpci_maxim: add terminating newlines to logging angkery
2021-01-24 15:43 ` Guenter Roeck [this message]
2021-01-25 9:33 ` Heikki Krogerus
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210124154349.GC131753@roeck-us.net \
--to=linux@roeck-us.net \
--cc=angkery@163.com \
--cc=gregkh@linuxfoundation.org \
--cc=heikki.krogerus@linux.intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=yangjunlin@yulong.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox