[PATCH 5.10 113/199] drivers: iio: temperature: Add delay after the addressed reset command in mlx90632.c

Greg Kroah-Hartman
2021-01-26T02:07:10Z

From: Slaveyko Slaveykov <sis@melexis.com>

commit cf5b1385d748b2f91b0c05bb301fcaf9bdbad385 upstream.

After an I2C reset command, the mlx90632 needs some time before
responding to other I2C commands. Without that delay, there is a chance
that the I2C command(s) after the reset will not be accepted.

Signed-off-by: Slaveyko Slaveykov <sis@melexis.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Crt Mori <cmo@melexis.com>
Fixes: e02472f74a81 ("iio:temperature:mlx90632: Adding extended calibration option")
Link: https://lore.kernel.org/r/20201216115720.12404-2-sis@melexis.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
drivers/iio/temperature/mlx90632.c | 6 ++++++
1 file changed, 6 insertions(+)

--- a/drivers/iio/temperature/mlx90632.c
+++ b/drivers/iio/temperature/mlx90632.c
@@ -248,6 +248,12 @@ static int mlx90632_set_meas_type(struct
if (ret < 0)
return ret;

+ /*
+ * Give the mlx90632 some time to reset properly before sending a new I2C command
+ * if this is not done, the following I2C command(s) will not be accepted.
+ */
+ usleep_range(150, 200);
+
ret = regmap_write_bits(regmap, MLX90632_REG_CONTROL,
(MLX90632_CFG_MTYP_MASK | MLX90632_CFG_PWR_MASK),
(MLX90632_MTYP_STATUS(type) | MLX90632_PWR_STATUS_HALT));