From: Badhri Jagan Sridharan <badhri@google.com>
To: Guenter Roeck <linux@roeck-us.net>,
Heikki Krogerus <heikki.krogerus@linux.intel.com>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Kyle Tso <kyletso@google.com>
Cc: linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org,
Badhri Jagan Sridharan <badhri@google.com>
Subject: [PATCH v1 2/3] usb: typec: tcpci: Add Callback to Usb Communication capable partner
Date: Mon, 1 Feb 2021 01:53:08 -0800 [thread overview]
Message-ID: <20210201095309.39486-2-badhri@google.com> (raw)
In-Reply-To: <20210201095309.39486-1-badhri@google.com>
The USB Communications Capable bit indicates if port
partner is capable of communication over the USB data lines
(e.g. D+/- or SS Tx/Rx). TCPM passes this information for chip specific
operations.
Signed-off-by: Badhri Jagan Sridharan <badhri@google.com>
---
drivers/usb/typec/tcpm/tcpci.c | 9 +++++++++
drivers/usb/typec/tcpm/tcpci.h | 6 ++++++
2 files changed, 15 insertions(+)
diff --git a/drivers/usb/typec/tcpm/tcpci.c b/drivers/usb/typec/tcpm/tcpci.c
index f676abab044b..a27deb0b5f03 100644
--- a/drivers/usb/typec/tcpm/tcpci.c
+++ b/drivers/usb/typec/tcpm/tcpci.c
@@ -255,6 +255,14 @@ static int tcpci_set_polarity(struct tcpc_dev *tcpc,
TCPC_TCPC_CTRL_ORIENTATION : 0);
}
+static void tcpci_set_partner_usb_comm_capable(struct tcpc_dev *tcpc, bool capable)
+{
+ struct tcpci *tcpci = tcpc_to_tcpci(tcpc);
+
+ if (tcpci->data->set_partner_usb_comm_capable)
+ tcpci->data->set_partner_usb_comm_capable(tcpci, tcpci->data, capable);
+}
+
static int tcpci_set_vconn(struct tcpc_dev *tcpc, bool enable)
{
struct tcpci *tcpci = tcpc_to_tcpci(tcpc);
@@ -720,6 +728,7 @@ struct tcpci *tcpci_register_port(struct device *dev, struct tcpci_data *data)
tcpci->tcpc.set_bist_data = tcpci_set_bist_data;
tcpci->tcpc.enable_frs = tcpci_enable_frs;
tcpci->tcpc.frs_sourcing_vbus = tcpci_frs_sourcing_vbus;
+ tcpci->tcpc.set_partner_usb_comm_capable = tcpci_set_partner_usb_comm_capable;
if (tcpci->data->auto_discharge_disconnect) {
tcpci->tcpc.enable_auto_vbus_discharge = tcpci_enable_auto_vbus_discharge;
diff --git a/drivers/usb/typec/tcpm/tcpci.h b/drivers/usb/typec/tcpm/tcpci.h
index c3c7d07d9b4e..57b6e24e0a0c 100644
--- a/drivers/usb/typec/tcpm/tcpci.h
+++ b/drivers/usb/typec/tcpm/tcpci.h
@@ -161,6 +161,10 @@ struct tcpci;
* Optional; Enables TCPC to autonously discharge vbus on disconnect.
* @vbus_vsafe0v:
* optional; Set when TCPC can detect whether vbus is at VSAFE0V.
+ * @set_partner_usb_comm_capable:
+ * Optional; The USB Communications Capable bit indicates if port
+ * partner is capable of communication over the USB data lines
+ * (e.g. D+/- or SS Tx/Rx). Called to notify the status of the bit.
*/
struct tcpci_data {
struct regmap *regmap;
@@ -175,6 +179,8 @@ struct tcpci_data {
enum typec_cc_status cc);
int (*set_vbus)(struct tcpci *tcpci, struct tcpci_data *data, bool source, bool sink);
void (*frs_sourcing_vbus)(struct tcpci *tcpci, struct tcpci_data *data);
+ void (*set_partner_usb_comm_capable)(struct tcpci *tcpci, struct tcpci_data *data,
+ bool capable);
};
struct tcpci *tcpci_register_port(struct device *dev, struct tcpci_data *data);
--
2.30.0.365.g02bc693789-goog
next prev parent reply other threads:[~2021-02-01 9:54 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-02-01 9:53 [PATCH v1 1/3] usb: typec: tcpm: Add Callback to Usb Communication capable partner Badhri Jagan Sridharan
2021-02-01 9:53 ` Badhri Jagan Sridharan [this message]
2021-02-01 9:53 ` [PATCH v1 3/3] usb: typec: tcpci_maxim: Enable data path when partner is USB Comm capable Badhri Jagan Sridharan
2021-02-01 14:59 ` [PATCH v1 1/3] usb: typec: tcpm: Add Callback to Usb Communication capable partner Guenter Roeck
2021-02-02 0:30 ` Badhri Jagan Sridharan
2021-02-01 15:12 ` Heikki Krogerus
2021-02-01 15:19 ` Greg Kroah-Hartman
2021-02-01 16:09 ` Heikki Krogerus
2021-02-01 16:38 ` Greg Kroah-Hartman
2021-02-01 19:45 ` Guenter Roeck
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210201095309.39486-2-badhri@google.com \
--to=badhri@google.com \
--cc=gregkh@linuxfoundation.org \
--cc=heikki.krogerus@linux.intel.com \
--cc=kyletso@google.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=linux@roeck-us.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox