From: Tomas Winkler <tomas.winkler@intel.com>
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Alexander Usyskin <alexander.usyskin@intel.com>,
linux-kernel@vger.kernel.org,
Tomas Winkler <tomas.winkler@intel.com>
Subject: [char-misc-next 4/6] mei: hbm: add client dma hbm messages
Date: Sat, 6 Feb 2021 16:43:23 +0200 [thread overview]
Message-ID: <20210206144325.25682-4-tomas.winkler@intel.com> (raw)
In-Reply-To: <20210206144325.25682-1-tomas.winkler@intel.com>
From: Alexander Usyskin <alexander.usyskin@intel.com>
Define structures for client DMA HBM protocol.
The protocol requires passing dma buffer address
and the buffer id.
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
---
drivers/misc/mei/hw.h | 53 +++++++++++++++++++++++++++++++++++++++++++
1 file changed, 53 insertions(+)
diff --git a/drivers/misc/mei/hw.h b/drivers/misc/mei/hw.h
index 9577a2cc0733..b10606550613 100644
--- a/drivers/misc/mei/hw.h
+++ b/drivers/misc/mei/hw.h
@@ -142,6 +142,12 @@
#define MEI_HBM_CAPABILITIES_REQ_CMD 0x13
#define MEI_HBM_CAPABILITIES_RES_CMD 0x93
+#define MEI_HBM_CLIENT_DMA_MAP_REQ_CMD 0x14
+#define MEI_HBM_CLIENT_DMA_MAP_RES_CMD 0x94
+
+#define MEI_HBM_CLIENT_DMA_UNMAP_REQ_CMD 0x15
+#define MEI_HBM_CLIENT_DMA_UNMAP_RES_CMD 0x95
+
/*
* MEI Stop Reason
* used by hbm_host_stop_request.reason
@@ -679,4 +685,51 @@ struct hbm_capability_response {
u8 capability_granted[3];
} __packed;
+/**
+ * struct hbm_client_dma_map_request - client dma map request from host to fw
+ *
+ * @hbm_cmd: bus message command header
+ * @client_buffer_id: client buffer id
+ * @reserved: reserved
+ * @address_lsb: DMA address LSB
+ * @address_msb: DMA address MSB
+ * @size: DMA size
+ */
+struct hbm_client_dma_map_request {
+ u8 hbm_cmd;
+ u8 client_buffer_id;
+ u8 reserved[2];
+ u32 address_lsb;
+ u32 address_msb;
+ u32 size;
+} __packed;
+
+/**
+ * struct hbm_client_dma_unmap_request
+ * client dma unmap request from the host to the firmware
+ *
+ * @hbm_cmd: bus message command header
+ * @status: unmap status
+ * @client_buffer_id: client buffer id
+ * @reserved: reserved
+ */
+struct hbm_client_dma_unmap_request {
+ u8 hbm_cmd;
+ u8 status;
+ u8 client_buffer_id;
+ u8 reserved;
+} __packed;
+
+/**
+ * struct hbm_client_dma_response
+ * client dma unmap response from the firmware to the host
+ *
+ * @hbm_cmd: bus message command header
+ * @status: command status
+ */
+struct hbm_client_dma_response {
+ u8 hbm_cmd;
+ u8 status;
+} __packed;
+
#endif
--
2.26.2
next prev parent reply other threads:[~2021-02-06 14:45 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-02-06 14:43 [char-misc-next 1/6] mei: use sprintf in tx_queue_limit_show sysfs Tomas Winkler
2021-02-06 14:43 ` [char-misc-next 2/6] mei: allow clients on bus to communicate in remove callback Tomas Winkler
2021-02-06 14:43 ` [char-misc-next 3/6] mei: add support for client dma capability Tomas Winkler
2021-02-06 14:43 ` Tomas Winkler [this message]
2021-02-06 14:43 ` [char-misc-next 5/6] mei: implement client dma setup Tomas Winkler
2021-02-06 14:43 ` [char-misc-next 6/6] mei: bus: add client dma interface Tomas Winkler
2021-02-06 14:48 ` Greg Kroah-Hartman
2021-02-06 15:04 ` Winkler, Tomas
2021-02-06 16:30 ` Greg Kroah-Hartman
2021-02-07 14:03 ` Winkler, Tomas
2021-02-07 14:33 ` Greg Kroah-Hartman
2021-02-07 19:04 ` Grumbach, Emmanuel
2021-02-06 14:46 ` [char-misc-next 1/6] mei: use sprintf in tx_queue_limit_show sysfs Greg Kroah-Hartman
2021-02-06 14:58 ` Winkler, Tomas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210206144325.25682-4-tomas.winkler@intel.com \
--to=tomas.winkler@intel.com \
--cc=alexander.usyskin@intel.com \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).