From: Jordan Crouse <jcrouse@codeaurora.org>
To: linux-arm-msm@vger.kernel.org
Cc: Akhil P Oommen <akhilpo@codeaurora.org>,
Daniel Vetter <daniel@ffwll.ch>, David Airlie <airlied@linux.ie>,
Eric Anholt <eric@anholt.net>, Jonathan Marek <jonathan@marek.ca>,
Rob Clark <robdclark@gmail.com>,
Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>,
Sean Paul <sean@poorly.run>,
Sharat Masetty <smasetty@codeaurora.org>,
dri-devel@lists.freedesktop.org, freedreno@lists.freedesktop.org,
linux-kernel@vger.kernel.org
Subject: [PATCH v2] drm/msm: a6xx: Make sure the SQE microcode is safe
Date: Tue, 9 Feb 2021 17:52:05 -0700 [thread overview]
Message-ID: <20210210005205.783377-1-jcrouse@codeaurora.org> (raw)
Most a6xx targets have security issues that were fixed with new versions
of the microcode(s). Make sure that we are booting with a safe version of
the microcode for the target and print a message and error if not.
v2: Add more informative error messages and fix typos
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
---
drivers/gpu/drm/msm/adreno/a6xx_gpu.c | 77 ++++++++++++++++++++++-----
1 file changed, 64 insertions(+), 13 deletions(-)
diff --git a/drivers/gpu/drm/msm/adreno/a6xx_gpu.c b/drivers/gpu/drm/msm/adreno/a6xx_gpu.c
index ba8e9d3cf0fe..064b7face504 100644
--- a/drivers/gpu/drm/msm/adreno/a6xx_gpu.c
+++ b/drivers/gpu/drm/msm/adreno/a6xx_gpu.c
@@ -522,28 +522,73 @@ static int a6xx_cp_init(struct msm_gpu *gpu)
return a6xx_idle(gpu, ring) ? 0 : -EINVAL;
}
-static void a6xx_ucode_check_version(struct a6xx_gpu *a6xx_gpu,
+/*
+ * Check that the microcode version is new enough to include several key
+ * security fixes. Return true if the ucode is safe.
+ */
+static bool a6xx_ucode_check_version(struct a6xx_gpu *a6xx_gpu,
struct drm_gem_object *obj)
{
+ struct adreno_gpu *adreno_gpu = &a6xx_gpu->base;
+ struct msm_gpu *gpu = &adreno_gpu->base;
u32 *buf = msm_gem_get_vaddr(obj);
+ bool ret = false;
if (IS_ERR(buf))
- return;
+ return false;
/*
- * If the lowest nibble is 0xa that is an indication that this microcode
- * has been patched. The actual version is in dword [3] but we only care
- * about the patchlevel which is the lowest nibble of dword [3]
- *
- * Otherwise check that the firmware is greater than or equal to 1.90
- * which was the first version that had this fix built in
+ * Targets up to a640 (a618, a630 and a640) need to check for a
+ * microcode version that is patched to support the whereami opcode or
+ * one that is new enough to include it by default.
*/
- if (((buf[0] & 0xf) == 0xa) && (buf[2] & 0xf) >= 1)
- a6xx_gpu->has_whereami = true;
- else if ((buf[0] & 0xfff) > 0x190)
- a6xx_gpu->has_whereami = true;
+ if (adreno_is_a618(adreno_gpu) || adreno_is_a630(adreno_gpu) ||
+ adreno_is_a640(adreno_gpu)) {
+ /*
+ * If the lowest nibble is 0xa that is an indication that this
+ * microcode has been patched. The actual version is in dword
+ * [3] but we only care about the patchlevel which is the lowest
+ * nibble of dword [3]
+ *
+ * Otherwise check that the firmware is greater than or equal
+ * to 1.90 which was the first version that had this fix built
+ * in
+ */
+ if ((((buf[0] & 0xf) == 0xa) && (buf[2] & 0xf) >= 1) ||
+ (buf[0] & 0xfff) >= 0x190) {
+ a6xx_gpu->has_whereami = true;
+ ret = true;
+ goto out;
+ }
+ DRM_DEV_ERROR(&gpu->pdev->dev,
+ "a630 SQE ucode is too old. Have version %x need at least %x\n",
+ buf[0] & 0xfff, 0x190);
+ } else {
+ /*
+ * a650 tier targets don't need whereami but still need to be
+ * equal to or newer than 1.95 for other security fixes
+ */
+ if (adreno_is_a650(adreno_gpu)) {
+ if ((buf[0] & 0xfff) >= 0x195) {
+ ret = true;
+ goto out;
+ }
+
+ DRM_DEV_ERROR(&gpu->pdev->dev,
+ "a650 SQE ucode is too old. Have version %x need at least %x\n",
+ buf[0] & 0xfff, 0x195);
+ }
+
+ /*
+ * When a660 is added those targets should return true here
+ * since those have all the critical security fixes built in
+ * from the start
+ */
+ }
+out:
msm_gem_put_vaddr(obj);
+ return ret;
}
static int a6xx_ucode_init(struct msm_gpu *gpu)
@@ -566,7 +611,13 @@ static int a6xx_ucode_init(struct msm_gpu *gpu)
}
msm_gem_object_set_name(a6xx_gpu->sqe_bo, "sqefw");
- a6xx_ucode_check_version(a6xx_gpu, a6xx_gpu->sqe_bo);
+ if (!a6xx_ucode_check_version(a6xx_gpu, a6xx_gpu->sqe_bo)) {
+ msm_gem_unpin_iova(a6xx_gpu->sqe_bo, gpu->aspace);
+ drm_gem_object_put(a6xx_gpu->sqe_bo);
+
+ a6xx_gpu->sqe_bo = NULL;
+ return -EPERM;
+ }
}
gpu_write64(gpu, REG_A6XX_CP_SQE_INSTR_BASE_LO,
--
2.25.1
next reply other threads:[~2021-02-10 2:07 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-02-10 0:52 Jordan Crouse [this message]
2021-02-11 13:20 ` [PATCH v2] drm/msm: a6xx: Make sure the SQE microcode is safe Akhil P Oommen
2021-02-11 16:02 ` Jordan Crouse
2021-02-12 7:37 ` Akhil P Oommen
2021-03-31 13:40 ` Dmitry Baryshkov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210210005205.783377-1-jcrouse@codeaurora.org \
--to=jcrouse@codeaurora.org \
--cc=airlied@linux.ie \
--cc=akhilpo@codeaurora.org \
--cc=daniel@ffwll.ch \
--cc=dri-devel@lists.freedesktop.org \
--cc=eric@anholt.net \
--cc=freedreno@lists.freedesktop.org \
--cc=jonathan@marek.ca \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robdclark@gmail.com \
--cc=saiprakash.ranjan@codeaurora.org \
--cc=sean@poorly.run \
--cc=smasetty@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox