public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
To: Md Sadre Alam <mdalam@codeaurora.org>
Cc: miquel.raynal@bootlin.com, boris.brezillon@collabora.com,
	linux-mtd@lists.infradead.org, linux-kernel@vger.kernel.org,
	vigneshr@ti.com, sricharan@codeaurora.org
Subject: Re: [PATCH V4] mtd: rawnand: qcom: update last code word register
Date: Wed, 10 Feb 2021 14:31:44 +0530	[thread overview]
Message-ID: <20210210090144.GE19226@work> (raw)
In-Reply-To: <1611869959-5109-1-git-send-email-mdalam@codeaurora.org>

On Fri, Jan 29, 2021 at 03:09:19AM +0530, Md Sadre Alam wrote:
> From QPIC version 2.0 onwards new register got added to
> read last codeword. This change will add the READ_LOCATION_LAST_CW_n
> register.
> 
> For first three code word READ_LOCATION_n register will be
> use.For last code word READ_LOCATION_LAST_CW_n register will be
> use.
> 
> Signed-off-by: Md Sadre Alam <mdalam@codeaurora.org>

Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>

Thanks,
Mani

> ---
> [V4]
>  * Modified condition for nandc_set_read_loc_last() in qcom_nandc_read_cw_raw().
>  * Added one additional argument "last_cw" to the function config_nand_cw_read()
>    to handle last code word condition.
>  * Changed total number of last code word register "NAND_READ_LOCATION_LAST_CW_0" to 4
>    while doing code word configuration.
>  drivers/mtd/nand/raw/qcom_nandc.c | 110 +++++++++++++++++++++++++++++---------
>  1 file changed, 84 insertions(+), 26 deletions(-)
> 
> diff --git a/drivers/mtd/nand/raw/qcom_nandc.c b/drivers/mtd/nand/raw/qcom_nandc.c
> index 667e4bf..9484be8 100644
> --- a/drivers/mtd/nand/raw/qcom_nandc.c
> +++ b/drivers/mtd/nand/raw/qcom_nandc.c
> @@ -48,6 +48,10 @@
>  #define	NAND_READ_LOCATION_1		0xf24
>  #define	NAND_READ_LOCATION_2		0xf28
>  #define	NAND_READ_LOCATION_3		0xf2c
> +#define	NAND_READ_LOCATION_LAST_CW_0	0xf40
> +#define	NAND_READ_LOCATION_LAST_CW_1	0xf44
> +#define	NAND_READ_LOCATION_LAST_CW_2	0xf48
> +#define	NAND_READ_LOCATION_LAST_CW_3	0xf4c
>  
>  /* dummy register offsets, used by write_reg_dma */
>  #define	NAND_DEV_CMD1_RESTORE		0xdead
> @@ -187,6 +191,12 @@ nandc_set_reg(nandc, NAND_READ_LOCATION_##reg,			\
>  	      ((size) << READ_LOCATION_SIZE) |			\
>  	      ((is_last) << READ_LOCATION_LAST))
>  
> +#define nandc_set_read_loc_last(nandc, reg, offset, size, is_last)	\
> +nandc_set_reg(nandc, NAND_READ_LOCATION_LAST_CW_##reg,			\
> +	      ((offset) << READ_LOCATION_OFFSET) |		\
> +	      ((size) << READ_LOCATION_SIZE) |			\
> +	      ((is_last) << READ_LOCATION_LAST))
> +
>  /*
>   * Returns the actual register address for all NAND_DEV_ registers
>   * (i.e. NAND_DEV_CMD0, NAND_DEV_CMD1, NAND_DEV_CMD2 and NAND_DEV_CMD_VLD)
> @@ -316,6 +326,10 @@ struct nandc_regs {
>  	__le32 read_location1;
>  	__le32 read_location2;
>  	__le32 read_location3;
> +	__le32 read_location_last0;
> +	__le32 read_location_last1;
> +	__le32 read_location_last2;
> +	__le32 read_location_last3;
>  
>  	__le32 erased_cw_detect_cfg_clr;
>  	__le32 erased_cw_detect_cfg_set;
> @@ -644,6 +658,14 @@ static __le32 *offset_to_nandc_reg(struct nandc_regs *regs, int offset)
>  		return &regs->read_location2;
>  	case NAND_READ_LOCATION_3:
>  		return &regs->read_location3;
> +	case NAND_READ_LOCATION_LAST_CW_0:
> +		return &regs->read_location_last0;
> +	case NAND_READ_LOCATION_LAST_CW_1:
> +		return &regs->read_location_last1;
> +	case NAND_READ_LOCATION_LAST_CW_2:
> +		return &regs->read_location_last2;
> +	case NAND_READ_LOCATION_LAST_CW_3:
> +		return &regs->read_location_last3;
>  	default:
>  		return NULL;
>  	}
> @@ -719,9 +741,14 @@ static void update_rw_regs(struct qcom_nand_host *host, int num_cw, bool read)
>  	nandc_set_reg(nandc, NAND_READ_STATUS, host->clrreadstatus);
>  	nandc_set_reg(nandc, NAND_EXEC_CMD, 1);
>  
> -	if (read)
> -		nandc_set_read_loc(nandc, 0, 0, host->use_ecc ?
> -				   host->cw_data : host->cw_size, 1);
> +	if (read) {
> +		if (nandc->props->qpic_v2)
> +			nandc_set_read_loc_last(nandc, 0, 0, host->use_ecc ?
> +					host->cw_data : host->cw_size, 1);
> +		else
> +			nandc_set_read_loc(nandc, 0, 0, host->use_ecc ?
> +					host->cw_data : host->cw_size, 1);
> +	}
>  }
>  
>  /*
> @@ -1094,11 +1121,16 @@ static void config_nand_page_read(struct qcom_nand_controller *nandc)
>   * before reading each codeword in NAND page.
>   */
>  static void
> -config_nand_cw_read(struct qcom_nand_controller *nandc, bool use_ecc)
> +config_nand_cw_read(struct qcom_nand_controller *nandc, bool use_ecc, bool last_cw)
>  {
> -	if (nandc->props->is_bam)
> -		write_reg_dma(nandc, NAND_READ_LOCATION_0, 4,
> -			      NAND_BAM_NEXT_SGL);
> +	if (nandc->props->is_bam) {
> +		if (nandc->props->qpic_v2 && last_cw)
> +			write_reg_dma(nandc, NAND_READ_LOCATION_LAST_CW_0, 4,
> +				      NAND_BAM_NEXT_SGL);
> +		else
> +			write_reg_dma(nandc, NAND_READ_LOCATION_0, 4,
> +				      NAND_BAM_NEXT_SGL);
> +	}
>  
>  	write_reg_dma(nandc, NAND_FLASH_CMD, 1, NAND_BAM_NEXT_SGL);
>  	write_reg_dma(nandc, NAND_EXEC_CMD, 1, NAND_BAM_NEXT_SGL);
> @@ -1118,10 +1150,10 @@ config_nand_cw_read(struct qcom_nand_controller *nandc, bool use_ecc)
>   */
>  static void
>  config_nand_single_cw_page_read(struct qcom_nand_controller *nandc,
> -				bool use_ecc)
> +				bool use_ecc, bool last_cw)
>  {
>  	config_nand_page_read(nandc);
> -	config_nand_cw_read(nandc, use_ecc);
> +	config_nand_cw_read(nandc, use_ecc, last_cw);
>  }
>  
>  /*
> @@ -1215,7 +1247,7 @@ static int nandc_param(struct qcom_nand_host *host)
>  	nandc->buf_count = 512;
>  	memset(nandc->data_buffer, 0xff, nandc->buf_count);
>  
> -	config_nand_single_cw_page_read(nandc, false);
> +	config_nand_single_cw_page_read(nandc, false, false);
>  
>  	read_data_dma(nandc, FLASH_BUF_ACC, nandc->data_buffer,
>  		      nandc->buf_count, 0);
> @@ -1633,19 +1665,32 @@ qcom_nandc_read_cw_raw(struct mtd_info *mtd, struct nand_chip *chip,
>  	}
>  
>  	if (nandc->props->is_bam) {
> -		nandc_set_read_loc(nandc, 0, read_loc, data_size1, 0);
> -		read_loc += data_size1;
> +		if (nandc->props->qpic_v2 && cw == (ecc->steps - 1)) {
> +			nandc_set_read_loc_last(nandc, 0, read_loc, data_size1, 0);
> +			read_loc += data_size1;
> +
> +			nandc_set_read_loc_last(nandc, 1, read_loc, oob_size1, 0);
> +			read_loc += oob_size1;
>  
> -		nandc_set_read_loc(nandc, 1, read_loc, oob_size1, 0);
> -		read_loc += oob_size1;
> +			nandc_set_read_loc_last(nandc, 2, read_loc, data_size2, 0);
> +			read_loc += data_size2;
>  
> -		nandc_set_read_loc(nandc, 2, read_loc, data_size2, 0);
> -		read_loc += data_size2;
> +			nandc_set_read_loc_last(nandc, 3, read_loc, oob_size2, 1);
> +		} else {
> +			nandc_set_read_loc(nandc, 0, read_loc, data_size1, 0);
> +			read_loc += data_size1;
> +
> +			nandc_set_read_loc(nandc, 1, read_loc, oob_size1, 0);
> +			read_loc += oob_size1;
>  
> -		nandc_set_read_loc(nandc, 3, read_loc, oob_size2, 1);
> +			nandc_set_read_loc(nandc, 2, read_loc, data_size2, 0);
> +			read_loc += data_size2;
> +
> +			nandc_set_read_loc(nandc, 3, read_loc, oob_size2, 1);
> +		}
>  	}
>  
> -	config_nand_cw_read(nandc, false);
> +	config_nand_cw_read(nandc, false, cw == ecc->steps - 1 ? true : false);
>  
>  	read_data_dma(nandc, reg_off, data_buf, data_size1, 0);
>  	reg_off += data_size1;
> @@ -1873,18 +1918,31 @@ static int read_page_ecc(struct qcom_nand_host *host, u8 *data_buf,
>  
>  		if (nandc->props->is_bam) {
>  			if (data_buf && oob_buf) {
> -				nandc_set_read_loc(nandc, 0, 0, data_size, 0);
> -				nandc_set_read_loc(nandc, 1, data_size,
> -						   oob_size, 1);
> +				if (nandc->props->qpic_v2 && i == (ecc->steps - 1)) {
> +					nandc_set_read_loc_last(nandc, 0, 0, data_size, 0);
> +					nandc_set_read_loc_last(nandc, 1, data_size,
> +								oob_size, 1);
> +				} else {
> +					nandc_set_read_loc(nandc, 0, 0, data_size, 0);
> +					nandc_set_read_loc(nandc, 1, data_size,
> +							   oob_size, 1);
> +				}
>  			} else if (data_buf) {
> -				nandc_set_read_loc(nandc, 0, 0, data_size, 1);
> +				if (nandc->props->qpic_v2 && i == (ecc->steps - 1))
> +					nandc_set_read_loc_last(nandc, 0, 0, data_size, 1);
> +				else
> +					nandc_set_read_loc(nandc, 0, 0, data_size, 1);
>  			} else {
> -				nandc_set_read_loc(nandc, 0, data_size,
> -						   oob_size, 1);
> +				if (nandc->props->qpic_v2 && i == (ecc->steps - 1))
> +					nandc_set_read_loc_last(nandc, 0, data_size,
> +								oob_size, 1);
> +				else
> +					nandc_set_read_loc(nandc, 0, data_size,
> +							   oob_size, 1);
>  			}
>  		}
>  
> -		config_nand_cw_read(nandc, true);
> +		config_nand_cw_read(nandc, true, i == ecc->steps - 1 ? true : false);
>  
>  		if (data_buf)
>  			read_data_dma(nandc, FLASH_BUF_ACC, data_buf,
> @@ -1946,7 +2004,7 @@ static int copy_last_cw(struct qcom_nand_host *host, int page)
>  	set_address(host, host->cw_size * (ecc->steps - 1), page);
>  	update_rw_regs(host, 1, true);
>  
> -	config_nand_single_cw_page_read(nandc, host->use_ecc);
> +	config_nand_single_cw_page_read(nandc, host->use_ecc, true);
>  
>  	read_data_dma(nandc, FLASH_BUF_ACC, nandc->data_buffer, size, 0);
>  
> -- 
> 2.7.4
> 

  reply	other threads:[~2021-02-10  9:13 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-01-28 21:39 [PATCH V4] mtd: rawnand: qcom: update last code word register Md Sadre Alam
2021-02-10  9:01 ` Manivannan Sadhasivam [this message]
2021-02-11 14:07   ` Miquel Raynal
2021-02-11 19:30     ` mdalam
2021-02-12  8:19       ` Miquel Raynal
2021-02-14 21:20         ` mdalam

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210210090144.GE19226@work \
    --to=manivannan.sadhasivam@linaro.org \
    --cc=boris.brezillon@collabora.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mtd@lists.infradead.org \
    --cc=mdalam@codeaurora.org \
    --cc=miquel.raynal@bootlin.com \
    --cc=sricharan@codeaurora.org \
    --cc=vigneshr@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox