From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Miaoqing Pan <miaoqing@codeaurora.org>,
Brian Norris <briannorris@chromium.org>,
Kalle Valo <kvalo@codeaurora.org>,
Sasha Levin <sashal@kernel.org>,
ath10k@lists.infradead.org, linux-wireless@vger.kernel.org,
netdev@vger.kernel.org
Subject: [PATCH AUTOSEL 4.9 06/12] ath10k: fix wmi mgmt tx queue full due to race condition
Date: Wed, 24 Feb 2021 07:55:34 -0500 [thread overview]
Message-ID: <20210224125540.484221-6-sashal@kernel.org> (raw)
In-Reply-To: <20210224125540.484221-1-sashal@kernel.org>
From: Miaoqing Pan <miaoqing@codeaurora.org>
[ Upstream commit b55379e343a3472c35f4a1245906db5158cab453 ]
Failed to transmit wmi management frames:
[84977.840894] ath10k_snoc a000000.wifi: wmi mgmt tx queue is full
[84977.840913] ath10k_snoc a000000.wifi: failed to transmit packet, dropping: -28
[84977.840924] ath10k_snoc a000000.wifi: failed to submit frame: -28
[84977.840932] ath10k_snoc a000000.wifi: failed to transmit frame: -28
This issue is caused by race condition between skb_dequeue and
__skb_queue_tail. The queue of ‘wmi_mgmt_tx_queue’ is protected by a
different lock: ar->data_lock vs list->lock, the result is no protection.
So when ath10k_mgmt_over_wmi_tx_work() and ath10k_mac_tx_wmi_mgmt()
running concurrently on different CPUs, there appear to be a rare corner
cases when the queue length is 1,
CPUx (skb_deuque) CPUy (__skb_queue_tail)
next=list
prev=list
struct sk_buff *skb = skb_peek(list); WRITE_ONCE(newsk->next, next);
WRITE_ONCE(list->qlen, list->qlen - 1);WRITE_ONCE(newsk->prev, prev);
next = skb->next; WRITE_ONCE(next->prev, newsk);
prev = skb->prev; WRITE_ONCE(prev->next, newsk);
skb->next = skb->prev = NULL; list->qlen++;
WRITE_ONCE(next->prev, prev);
WRITE_ONCE(prev->next, next);
If the instruction ‘next = skb->next’ is executed before
‘WRITE_ONCE(prev->next, newsk)’, newsk will be lost, as CPUx get the
old ‘next’ pointer, but the length is still added by one. The final
result is the length of the queue will reach the maximum value but
the queue is empty.
So remove ar->data_lock, and use 'skb_queue_tail' instead of
'__skb_queue_tail' to prevent the potential race condition. Also switch
to use skb_queue_len_lockless, in case we queue a few SKBs simultaneously.
Tested-on: WCN3990 hw1.0 SNOC WLAN.HL.3.1.c2-00033-QCAHLSWMTPLZ-1
Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1608618887-8857-1-git-send-email-miaoqing@codeaurora.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/ath/ath10k/mac.c | 15 ++++-----------
1 file changed, 4 insertions(+), 11 deletions(-)
diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index 8b3fe88d1c4e7..564181bb0906a 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -3452,23 +3452,16 @@ bool ath10k_mac_tx_frm_has_freq(struct ath10k *ar)
static int ath10k_mac_tx_wmi_mgmt(struct ath10k *ar, struct sk_buff *skb)
{
struct sk_buff_head *q = &ar->wmi_mgmt_tx_queue;
- int ret = 0;
-
- spin_lock_bh(&ar->data_lock);
- if (skb_queue_len(q) == ATH10K_MAX_NUM_MGMT_PENDING) {
+ if (skb_queue_len_lockless(q) >= ATH10K_MAX_NUM_MGMT_PENDING) {
ath10k_warn(ar, "wmi mgmt tx queue is full\n");
- ret = -ENOSPC;
- goto unlock;
+ return -ENOSPC;
}
- __skb_queue_tail(q, skb);
+ skb_queue_tail(q, skb);
ieee80211_queue_work(ar->hw, &ar->wmi_mgmt_tx_work);
-unlock:
- spin_unlock_bh(&ar->data_lock);
-
- return ret;
+ return 0;
}
static enum ath10k_mac_tx_path
--
2.27.0
next prev parent reply other threads:[~2021-02-24 14:32 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-02-24 12:55 [PATCH AUTOSEL 4.9 01/12] staging: fwserial: Fix error handling in fwserial_create Sasha Levin
2021-02-24 12:55 ` [PATCH AUTOSEL 4.9 02/12] x86/reboot: Add Zotac ZBOX CI327 nano PCI reboot quirk Sasha Levin
2021-02-24 12:55 ` [PATCH AUTOSEL 4.9 03/12] vt/consolemap: do font sum unsigned Sasha Levin
2021-02-24 12:55 ` [PATCH AUTOSEL 4.9 04/12] wlcore: Fix command execute failure 19 for wl12xx Sasha Levin
2021-02-24 12:55 ` [PATCH AUTOSEL 4.9 05/12] pktgen: fix misuse of BUG_ON() in pktgen_thread_worker() Sasha Levin
2021-02-24 12:55 ` Sasha Levin [this message]
2021-02-24 12:55 ` [PATCH AUTOSEL 4.9 07/12] x86/build: Treat R_386_PLT32 relocation as R_386_PC32 Sasha Levin
2021-02-24 12:55 ` [PATCH AUTOSEL 4.9 08/12] Bluetooth: Fix null pointer dereference in amp_read_loc_assoc_final_data Sasha Levin
2021-02-24 12:55 ` [PATCH AUTOSEL 4.9 09/12] staging: most: sound: add sanity check for function argument Sasha Levin
2021-02-24 12:55 ` [PATCH AUTOSEL 4.9 10/12] media: uvcvideo: Allow entities with no pads Sasha Levin
2021-02-24 12:55 ` [PATCH AUTOSEL 4.9 11/12] tomoyo: ignore data race while checking quota Sasha Levin
2021-02-24 12:55 ` [PATCH AUTOSEL 4.9 12/12] smackfs: restrict bytes count in smackfs write functions Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210224125540.484221-6-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=ath10k@lists.infradead.org \
--cc=briannorris@chromium.org \
--cc=kvalo@codeaurora.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-wireless@vger.kernel.org \
--cc=miaoqing@codeaurora.org \
--cc=netdev@vger.kernel.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox