From: Dmitry Osipenko <digetx@gmail.com>
To: Thierry Reding <thierry.reding@gmail.com>,
Jonathan Hunter <jonathanh@nvidia.com>,
Daniel Lezcano <daniel.lezcano@linaro.org>,
Nicolas Chauvet <kwizart@gmail.com>,
Matt Merhar <mattmerhar@protonmail.com>,
Peter Geis <pgwipeout@gmail.com>
Cc: linux-tegra@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v3 00/14] NVIDIA Tegra ARM32 device-tree improvements
Date: Tue, 2 Mar 2021 15:09:49 +0300 [thread overview]
Message-ID: <20210302121003.15058-1-digetx@gmail.com> (raw)
Hi,
This series is partially factored out from [1] since the DT patches
could be applied separately. In addition I added couple more new
patches and implemented suggestion given by Daniel Lezcano to [1],
see "Specify all CPU cores as cooling devices" patches.
[1] https://patchwork.ozlabs.org/project/linux-tegra/list/?series=221130
Please note that this patchset enables voltage scaling for a few boards,
but currently voltage scaling is limited in kernel by the regulator coupler
drivers, so it's safe to change the device-trees. Voltage scaling will
be fully unlocked once [1] will be merged.
Changelog:
v3: - Added new "Specify tps65911 as wakeup source" patch, which previously
was a part of series that added wakeup-source support to TPS65911 RTC
driver [1]. The RTC series was partially applied, excluding the DT
patch.
[1] https://lore.kernel.org/linux-rtc/20210120211603.18555-1-digetx@gmail.com/
v2: - The "acer-a500: Rename avdd to vdda of touchscreen node" patch
now shouldn't have merge conflicts with the upstream kernel since
v1 was based on a patch that adds a new atmel,wakeup-method property,
which is not supported by upstream yet.
- Fixed unwrapped commit description in the "cardhu: Support CPU
frequency and voltage" patch.
Dmitry Osipenko (14):
ARM: tegra: ventana: Support CPU and Core voltage scaling
ARM: tegra: ventana: Support CPU thermal throttling
ARM: tegra: cardhu: Support CPU frequency and voltage scaling on all
board variants
ARM: tegra: cardhu: Support CPU thermal throttling
ARM: tegra: paz00: Enable full voltage scaling ranges for CPU and Core
domains
ARM: tegra: acer-a500: Enable core voltage scaling
ARM: tegra: acer-a500: Reduce thermal throttling hysteresis to 0.2C
ARM: tegra: acer-a500: Specify all CPU cores as cooling devices
ARM: tegra: acer-a500: Rename avdd to vdda of touchscreen node
ARM: tegra: nexus7: Specify all CPU cores as cooling devices
ARM: tegra: ouya: Specify all CPU cores as cooling devices
ARM: tegra: Specify CPU suspend OPP in device-tree
ARM: tegra: Specify memory suspend OPP in device-tree
ARM: tegra: Specify tps65911 as wakeup source
.../boot/dts/tegra124-peripherals-opp.dtsi | 5 ++
.../boot/dts/tegra20-acer-a500-picasso.dts | 14 ++--
arch/arm/boot/dts/tegra20-cpu-opp.dtsi | 2 +
arch/arm/boot/dts/tegra20-paz00.dts | 14 ++--
.../arm/boot/dts/tegra20-peripherals-opp.dtsi | 1 +
arch/arm/boot/dts/tegra20-ventana.dts | 78 ++++++++++++++---
arch/arm/boot/dts/tegra30-apalis.dtsi | 1 +
.../tegra30-asus-nexus7-grouper-common.dtsi | 14 +++-
.../tegra30-asus-nexus7-grouper-ti-pmic.dtsi | 1 +
arch/arm/boot/dts/tegra30-beaver.dts | 1 +
arch/arm/boot/dts/tegra30-cardhu-a04.dts | 48 -----------
arch/arm/boot/dts/tegra30-cardhu.dtsi | 84 ++++++++++++++++++-
arch/arm/boot/dts/tegra30-colibri.dtsi | 1 +
arch/arm/boot/dts/tegra30-cpu-opp.dtsi | 3 +
arch/arm/boot/dts/tegra30-ouya.dts | 16 +++-
.../arm/boot/dts/tegra30-peripherals-opp.dtsi | 3 +
16 files changed, 202 insertions(+), 84 deletions(-)
--
2.29.2
next reply other threads:[~2021-03-02 12:54 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-03-02 12:09 Dmitry Osipenko [this message]
2021-03-02 12:09 ` [PATCH v3 01/14] ARM: tegra: ventana: Support CPU and Core voltage scaling Dmitry Osipenko
2021-03-02 12:09 ` [PATCH v3 02/14] ARM: tegra: ventana: Support CPU thermal throttling Dmitry Osipenko
2021-03-02 12:09 ` [PATCH v3 03/14] ARM: tegra: cardhu: Support CPU frequency and voltage scaling on all board variants Dmitry Osipenko
2021-03-02 12:09 ` [PATCH v3 04/14] ARM: tegra: cardhu: Support CPU thermal throttling Dmitry Osipenko
2021-03-02 12:09 ` [PATCH v3 05/14] ARM: tegra: paz00: Enable full voltage scaling ranges for CPU and Core domains Dmitry Osipenko
2021-03-02 12:09 ` [PATCH v3 06/14] ARM: tegra: acer-a500: Enable core voltage scaling Dmitry Osipenko
2021-03-02 12:09 ` [PATCH v3 07/14] ARM: tegra: acer-a500: Reduce thermal throttling hysteresis to 0.2C Dmitry Osipenko
2021-03-02 12:09 ` [PATCH v3 08/14] ARM: tegra: acer-a500: Specify all CPU cores as cooling devices Dmitry Osipenko
2021-03-02 12:09 ` [PATCH v3 09/14] ARM: tegra: acer-a500: Rename avdd to vdda of touchscreen node Dmitry Osipenko
2021-03-24 15:11 ` Thierry Reding
2021-03-24 15:24 ` Dmitry Osipenko
2021-03-02 12:09 ` [PATCH v3 10/14] ARM: tegra: nexus7: Specify all CPU cores as cooling devices Dmitry Osipenko
2021-03-02 12:10 ` [PATCH v3 11/14] ARM: tegra: ouya: " Dmitry Osipenko
2021-03-02 12:10 ` [PATCH v3 12/14] ARM: tegra: Specify CPU suspend OPP in device-tree Dmitry Osipenko
2021-03-02 12:10 ` [PATCH v3 13/14] ARM: tegra: Specify memory " Dmitry Osipenko
2021-03-02 12:10 ` [PATCH v3 14/14] ARM: tegra: Specify tps65911 as wakeup source Dmitry Osipenko
2021-03-24 15:12 ` [PATCH v3 00/14] NVIDIA Tegra ARM32 device-tree improvements Thierry Reding
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210302121003.15058-1-digetx@gmail.com \
--to=digetx@gmail.com \
--cc=daniel.lezcano@linaro.org \
--cc=jonathanh@nvidia.com \
--cc=kwizart@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-tegra@vger.kernel.org \
--cc=mattmerhar@protonmail.com \
--cc=pgwipeout@gmail.com \
--cc=thierry.reding@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox