public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Kishon Vijay Abraham I <kishon@ti.com>
To: Kishon Vijay Abraham I <kishon@ti.com>,
	Vinod Koul <vkoul@kernel.org>,
	Swapnil Jakhade <sjakhade@cadence.com>
Cc: <linux-kernel@vger.kernel.org>, <linux-phy@lists.infradead.org>,
	Lokesh Vutla <lokeshvutla@ti.com>
Subject: [PATCH v3 0/6] AM64: Add SERDES driver support
Date: Wed, 10 Mar 2021 17:38:34 +0530	[thread overview]
Message-ID: <20210310120840.16447-1-kishon@ti.com> (raw)

AM64 uses the same SERDES as in J7200, however AM642 EVM doesn't
have a clock generator (unlike J7200 base board). Here the clock from
the SERDES has to be routed to the PCIE connector. This series adds
support to drive reference clock output from SERDES and also adds
SERDES (torrent) and SERDES wrapper (WIZ) bindings.

v1 of the patch series can be found @ [1]
v2 of the patch series can be found @ [3]

Changes from v2:
*) Sent the DT bindings as a separate series [4]
*) Remove enabling PHY output clock in isolation mode

Changes from v1:
*) Model the internal clocks without device tree input (Add #clock-cells
   to SERDES DT nodes for getting a reference to the clock using index
   to phandle). This is in accordance with comment given by Rob [2].
   However the existing method to model clocks from device tree is not
   removed to support upstreamed device tree.
*) Included a patch to fix modifying static data by instance specific
   initializations.
*) Added a fix to delete "clk_div_sel" clk provider during cleanup

[1] -> https://lore.kernel.org/r/20201224114250.1083-1-kishon@ti.com
[2] -> http://lore.kernel.org/r/20210108025943.GA1790601@robh.at.kernel.org
[3] -> http://lore.kernel.org/r/20210222112314.10772-1-kishon@ti.com
[4] -> http://lore.kernel.org/r/20210310112745.3445-1-kishon@ti.com

Kishon Vijay Abraham I (6):
  phy: ti: j721e-wiz: Remove "regmap_field" from wiz_clk_{mux|div}_sel
  phy: ti: j721e-wiz: Delete "clk_div_sel" clk provider during cleanup
  phy: ti: j721e-wiz: Configure full rate divider for AM64
  phy: ti: j721e-wiz: Model the internal clocks without device tree
    input
  phy: ti: j721e-wiz: Enable reference clock output in cmn_refclk_<p/m>
  phy: cadence-torrent: Add support to drive refclk out

 drivers/phy/cadence/Kconfig               |   1 +
 drivers/phy/cadence/phy-cadence-torrent.c | 188 +++++++++++-
 drivers/phy/ti/phy-j721e-wiz.c            | 349 +++++++++++++++++++---
 3 files changed, 488 insertions(+), 50 deletions(-)

-- 
2.17.1


             reply	other threads:[~2021-03-10 12:09 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-03-10 12:08 Kishon Vijay Abraham I [this message]
2021-03-10 12:08 ` [PATCH v3 1/6] phy: ti: j721e-wiz: Remove "regmap_field" from wiz_clk_{mux|div}_sel Kishon Vijay Abraham I
2021-03-10 12:08 ` [PATCH v3 2/6] phy: ti: j721e-wiz: Delete "clk_div_sel" clk provider during cleanup Kishon Vijay Abraham I
2021-03-10 12:08 ` [PATCH v3 3/6] phy: ti: j721e-wiz: Configure full rate divider for AM64 Kishon Vijay Abraham I
2021-03-10 12:08 ` [PATCH v3 4/6] phy: ti: j721e-wiz: Model the internal clocks without device tree input Kishon Vijay Abraham I
2021-03-10 14:22   ` kernel test robot
2021-03-10 15:25   ` kernel test robot
2021-03-10 12:08 ` [PATCH v3 5/6] phy: ti: j721e-wiz: Enable reference clock output in cmn_refclk_<p/m> Kishon Vijay Abraham I
2021-03-10 12:08 ` [PATCH v3 6/6] phy: cadence-torrent: Add support to drive refclk out Kishon Vijay Abraham I
2021-03-10 14:08   ` kernel test robot
2021-03-10 14:52   ` kernel test robot
2021-03-15  5:44   ` Swapnil Kashinath Jakhade
2021-03-10 14:28 ` [PATCH v3 0/6] AM64: Add SERDES driver support Kishon Vijay Abraham I
2021-03-30 18:04 ` Vinod Koul

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210310120840.16447-1-kishon@ti.com \
    --to=kishon@ti.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-phy@lists.infradead.org \
    --cc=lokeshvutla@ti.com \
    --cc=sjakhade@cadence.com \
    --cc=vkoul@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox