Re: [PATCH v5 0/7] Add basic support for Loongson-2K1000

Thomas Bogendoerfer
2021-03-25T10:02:13Z

On Mon, Mar 15, 2021 at 03:49:57PM +0800, Qing Zhang wrote:
> These patches support single-core DTS boot to the serial port login
> interface, which can be operated using conventional commands.
>
> I have successfully tested it on the Loongson 2K1000 machine.
> pmon: http://cgit.loongnix.org/cgit/pmon-loongson3/
>
> Note:
> After the basic support is merged,
> I will commit SMP and other driver support in the future.
>
> Qing Zhang (7):
> MIPS: Loongson64: DeviceTree for Loongson-2K1000
> MIPS: Loongson64: Distinguish firmware dependencies DTB/LEFI
> MIPS: Loongson64: Add support for the Loongson-2K1000 to get
> cpu_clock_freq
> MIPS: Loongson64: Add Loongson-2K1000 early_printk_port
> irqchip/loongson-liointc: irqchip add 2.0 version
> dt-bindings: interrupt-controller: Add Loongson-2K1000 LIOINTC
> MIPS: Loongson64: Add a Loongson-2K1000 default config file
>
> .../loongson,liointc.yaml | 36 +-
> arch/mips/boot/dts/loongson/Makefile | 1 +
> .../boot/dts/loongson/loongson64-2k1000.dtsi | 243 ++++++++++++
> .../dts/loongson/loongson64_2core_2k1000.dts | 10 +
> arch/mips/configs/loongson2k_defconfig | 353 ++++++++++++++++++
> .../asm/mach-loongson64/builtin_dtbs.h | 1 +
> .../include/asm/mach-loongson64/loongson.h | 9 +-
> arch/mips/loongson64/env.c | 13 +-
> arch/mips/loongson64/init.c | 21 +-
> arch/mips/loongson64/time.c | 24 ++
> drivers/irqchip/irq-loongson-liointc.c | 58 ++-
> 11 files changed, 751 insertions(+), 18 deletions(-)
> create mode 100644 arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi
> create mode 100644 arch/mips/boot/dts/loongson/loongson64_2core_2k1000.dts
> create mode 100644 arch/mips/configs/loongson2k_defconfig

series applied to mips-next.

Thomas.

--
Crap can work. Given enough thrust pigs will fly, but it's not necessarily a
good idea. [ RFC1925, 2.3 ]