[RFC PATCH net-next v2 16/17] net: dsa: qca8k: pass switch_revision info to phy dev_flags

[Ansuel Smith <ansuelsmth@gmail.com>]

Define get_phy_flags to pass switch_Revision needed to tweak the
internal PHY with debug values based on the revision.

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
---
 drivers/net/dsa/qca8k.c | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

diff --git a/drivers/net/dsa/qca8k.c b/drivers/net/dsa/qca8k.c
index 7f72504f003a..1be1064586ae 100644
--- a/drivers/net/dsa/qca8k.c
+++ b/drivers/net/dsa/qca8k.c
@@ -1646,6 +1646,24 @@ qca8k_port_vlan_del(struct dsa_switch *ds, int port,
 	return ret;
 }
 
+static u32 qca8k_get_phy_flags(struct dsa_switch *ds, int port)
+{
+	struct qca8k_priv *priv = ds->priv;
+
+	pr_info("revision from phy %d", priv->switch_revision);
+
+	/* Communicate to the phy internal driver the switch revision.
+	 * Based on the switch revision different values needs to be
+	 * set to the dbg and mmd reg on the phy.
+	 * The first 2 bit are used to communicate the switch revision
+	 * to the phy driver.
+	 */
+	if (port > 0 && port < 6)
+		return priv->switch_revision;
+
+	return 0;
+}
+
 static enum dsa_tag_protocol
 qca8k_get_tag_protocol(struct dsa_switch *ds, int port,
 		       enum dsa_tag_protocol mp)
@@ -1679,6 +1697,7 @@ static const struct dsa_switch_ops qca8k_switch_ops = {
 	.phylink_mac_config	= qca8k_phylink_mac_config,
 	.phylink_mac_link_down	= qca8k_phylink_mac_link_down,
 	.phylink_mac_link_up	= qca8k_phylink_mac_link_up,
+	.get_phy_flags		= qca8k_get_phy_flags,
 };
 
 static int qca8k_read_switch_id(struct qca8k_priv *priv)
-- 
2.30.2