From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
To: Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
Ulf Hansson <ulf.hansson@linaro.org>,
linux-mmc@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v1 1/2] mmc: mmc_spi: Drop duplicate 'mmc_spi' in the debug messages
Date: Fri, 28 May 2021 14:21:26 +0300 [thread overview]
Message-ID: <20210528112127.71738-1-andriy.shevchenko@linux.intel.com> (raw)
dev_dbg() in any case prints the device and driver name, no need
to repeat this in (some) messages. Drop duplicates for good.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
drivers/mmc/host/mmc_spi.c | 12 +++++-------
1 file changed, 5 insertions(+), 7 deletions(-)
diff --git a/drivers/mmc/host/mmc_spi.c b/drivers/mmc/host/mmc_spi.c
index 9776a03a10f5..65c65bb5737f 100644
--- a/drivers/mmc/host/mmc_spi.c
+++ b/drivers/mmc/host/mmc_spi.c
@@ -504,7 +504,7 @@ mmc_spi_command_send(struct mmc_spi_host *host,
/* else: R1 (most commands) */
}
- dev_dbg(&host->spi->dev, " mmc_spi: CMD%d, resp %s\n",
+ dev_dbg(&host->spi->dev, " CMD%d, resp %s\n",
cmd->opcode, maptype(cmd));
/* send command, leaving chipselect active */
@@ -928,8 +928,7 @@ mmc_spi_data_do(struct mmc_spi_host *host, struct mmc_command *cmd,
while (length) {
t->len = min(length, blk_size);
- dev_dbg(&host->spi->dev,
- " mmc_spi: %s block, %d bytes\n",
+ dev_dbg(&host->spi->dev, " %s block, %d bytes\n",
(direction == DMA_TO_DEVICE) ? "write" : "read",
t->len);
@@ -974,7 +973,7 @@ mmc_spi_data_do(struct mmc_spi_host *host, struct mmc_command *cmd,
int tmp;
const unsigned statlen = sizeof(scratch->status);
- dev_dbg(&spi->dev, " mmc_spi: STOP_TRAN\n");
+ dev_dbg(&spi->dev, " STOP_TRAN\n");
/* Tweak the per-block message we set up earlier by morphing
* it to hold single buffer with the token followed by some
@@ -1175,7 +1174,7 @@ static void mmc_spi_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
canpower = host->pdata && host->pdata->setpower;
- dev_dbg(&host->spi->dev, "mmc_spi: power %s (%d)%s\n",
+ dev_dbg(&host->spi->dev, "power %s (%d)%s\n",
mmc_powerstring(ios->power_mode),
ios->vdd,
canpower ? ", can switch" : "");
@@ -1248,8 +1247,7 @@ static void mmc_spi_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
host->spi->max_speed_hz = ios->clock;
status = spi_setup(host->spi);
- dev_dbg(&host->spi->dev,
- "mmc_spi: clock to %d Hz, %d\n",
+ dev_dbg(&host->spi->dev, " clock to %d Hz, %d\n",
host->spi->max_speed_hz, status);
}
}
--
2.30.2
next reply other threads:[~2021-05-28 11:21 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-05-28 11:21 Andy Shevchenko [this message]
2021-05-28 11:21 ` [PATCH v1 2/2] mmc: mmc_spi: Imply container_of() to be no-op Andy Shevchenko
2021-05-31 10:16 ` Ulf Hansson
2021-05-31 10:16 ` [PATCH v1 1/2] mmc: mmc_spi: Drop duplicate 'mmc_spi' in the debug messages Ulf Hansson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210528112127.71738-1-andriy.shevchenko@linux.intel.com \
--to=andriy.shevchenko@linux.intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mmc@vger.kernel.org \
--cc=ulf.hansson@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox